Study guide

6.3 Indemnification, Hold Harmless & Liability Limits

Tennessee General Contractor Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Tennessee Licensing Law & Board Governance

1.1 Statutory Framework & Board Oversight 1.2 License Classifications & Project Thresholds 1.3 Qualifying Agent Requirements & Responsibilities 1.4 Unlicensed Contracting Penalties & Enforcement

2 Chapter 2: Licensing Finances, Maintenance & Renewals

2.1 Financial Statements, Working Capital & Monetary Limits 2.2 License Application & Board Review Process 2.3 License Renewal, Reinstatement & Maintenance

3 Chapter 3: Tennessee Lien Law: Rights & Pre-Lien Notices

3.1 Prime vs. Remote Contractor Lien Scope 3.2 Pre-Lien Notices & Notice of Nonpayment 3.3 Notice of Lien & Register Filing Procedures

4 Chapter 4: Tennessee Lien Law: Completion, Priority & Waivers

4.1 Notice of Completion & Statutory Expiration 4.2 Lien Enforcement, Foreclosure & Priority 4.3 Lien Waivers & Discharge of Liens

5 Chapter 5: Construction Contract Law & Tennessee Prompt Pay

5.1 Contract Fundamentals & Agreement Types 5.2 Tennessee Prompt Pay Act of 1991 5.3 Retainage Escrow & Statutory Compliance 5.4 Change Orders, Site Conditions & Dispute Resolution

6 Chapter 6: Subcontractor Agreements & Risk Allocation

6.1 Subcontractor Agreements & Flow-Down Provisions 6.2 Payment Contingencies: Pay-When-Paid vs Pay-If-Paid 6.3 Indemnification, Hold Harmless & Liability Limits

7 Chapter 7: Risk Management, Insurance & Surety Bonds

7.1 Commercial General Liability & Builder's Risk 7.2 Workers' Compensation & TN Services Registry 7.3 Surety Bonds: Bid, Performance & Payment Bonds 7.4 Public Works Bonding & Little Miller Act

8 Chapter 8: TOSHA, Safety Standards & Environmental Rules

8.1 TOSHA Regulations & Workplace Inspections 8.2 OSHA Construction Standards: Fall Protection & Excavation 8.3 HAZCOM, PPE & Environmental Permits 8.4 Lead, Asbestos & Hazardous Material Compliance

9 Chapter 9: Business Entities, Construction Accounting & Tax

9.1 Business Organizations & Formation in TN 9.2 Construction Accounting & Recognition Methods 9.3 Financial Statements & Ratio Analysis 9.4 Payroll Accounting, Taxes & Worker Classification

10 Chapter 10: Estimating, Bidding & Project Management

10.1 Estimating Direct/Indirect Costs & Takeoffs 10.2 Bidding Procedures & Public Bidding Laws 10.3 Project Scheduling, CPM & Quality Control 10.4 Building Codes, Closeout & Exam Navigation

6.3 Indemnification, Hold Harmless & Liability Limits

Key Takeaways Explain This Topic AI

The Tennessee Anti-Indemnification Statute (TCA 62-6-123) renders void and unenforceable any construction contract provision that requires a party to indemnify another for damages resulting from the sole negligence of the promisee.

Comparative or limited indemnification provisions remain fully enforceable under Tennessee law, binding the subcontractor to indemnify the general contractor only to the extent of the subcontractor's own negligence.

The contractual Duty to Defend is broader than the Duty to Indemnify, requiring the indemnifying subcontractor to fund legal defense expenses as soon as a covered claim is asserted.

Commercial General Liability (CGL) policies cover contractual indemnification obligations if the subcontract qualifies as an 'insured contract,' provided statutory anti-indemnification limits (TCA 62-6-123) are respected.

Last updated: July 2026

6.3 Indemnification, Hold Harmless & Liability Limits

Construction operations inherently involve high-risk activities, heavy machinery, elevation hazards, and physical bodily risks. When property damage or personal injuries occur on a jobsite, liability claims, worker compensation lawsuits, and third-party negligence suits frequently follow. Subcontract agreements universally include Indemnification and Hold Harmless clauses designed to allocate risk, assign legal defense responsibilities, and protect the general contractor and project owner from financial exposure.

However, freedom of contract in construction indemnification is restricted by law in Tennessee. General contractors must structure indemnification clauses in compliance with the Tennessee Anti-Indemnification Statute ( TCA 62-6-123 ) to avoid having their contract provisions declared void as against public policy.

Fundamentals of Indemnification & Hold Harmless Agreements

An indemnification clause is a contractual obligation wherein one party (the indemnitor , usually the subcontractor) agrees to reimburse, protect, and restore another party (the indemnitee , usually the general contractor or project owner) against financial losses, liabilities, claims, damages, and legal costs arising out of contract performance.

Core Terminology

Indemnitor : The party promising to pay and hold the other harmless (the trade subcontractor).

Indemnitee : The party receiving legal and financial protection (the general contractor, owner, architect, and their agents).

Hold Harmless : A contractual promise that the indemnitor will not attempt to hold the indemnitee legally liable for specified losses or third-party claims.

Three Categories of Construction Indemnification Clauses

Indemnification provisions across the United States are categorized into three distinct legal forms based on the degree of risk shifted:

Form of Indemnification Scope of Protection Provided Enforceability in Tennessee (TCA 62-6-123)

Broad Form Indemnification Indemnifies promisee even if loss is caused by the sole negligence of the promisee. VOID and UNENFORCEABLE by statute

Intermediate Form Indemnification Indemnifies promisee for joint negligence, but excludes sole negligence of promisee. ENFORCEABLE (if promisee is partially negligent)

Limited (Comparative) Form Indemnifies promisee only to the extent of the indemnitor's own negligence or fault. FULLY ENFORCEABLE

The Tennessee Anti-Indemnification Statute (TCA 62-6-123)

To prevent powerful general contractors and owners from forcing trade subcontractors to insure them against their own negligent acts, the Tennessee General Assembly enacted Tennessee Code Annotated § 62-6-123 .

Statutory Prohibition on Sole Negligence Indemnification

Under TCA 62-6-123 , any covenant, promise, or agreement contained in, collateral to, or affecting a construction or design contract that purports to indemnify or hold harmless a promisee (e.g., general contractor or owner) against liability for damages arising out of bodily injury to persons or damage to property caused by or resulting from the sole negligence of the promisee, its agents, or employees, is void and unenforceable as against public policy .

Exam Key Point: A subcontract clause stating "Subcontractor shall indemnify General Contractor for all injuries occurring on the jobsite, regardless of whether caused in whole or in part by General Contractor's negligence" is completely void under TCA 62-6-123 to the extent it covers the General Contractor's sole negligence.

Permissible Indemnification Scope Under TCA 62-6-123

Tennessee law permits indemnification clauses to cover:

Comparative / Proportional Fault : The subcontractor indemnifies the general contractor for damages caused by the subcontractor's own negligent acts or omissions (or those of its sub-tier trades).

Joint Negligence : Where both the general contractor and subcontractor are partially at fault, the subcontractor can be required to indemnify the general contractor for the subcontractor's proportion of fault (Intermediate Form).

Valid Insurance Agreements : TCA 62-6-123 explicitly does not invalidate contractual requirements requiring a subcontractor to purchase Commercial General Liability (CGL) insurance naming the general contractor as an Additional Insured .

Duty to Defend vs. Duty to Indemnify

A standard indemnity clause contains two separate legal duties: the Duty to Defend and the Duty to Indemnify . These duties operate under vastly different legal triggers and timelines.

Operational Differences

Duty to Defend (Immediate Obligation) :

Trigger : The moment a third party files a lawsuit or asserts a claim alleging facts covered by the subcontract indemnity agreement.

Scope : The indemnitor (subcontractor) must retain legal counsel and pay ongoing defense costs (attorney fees, court costs, expert witness fees) as they accrue.

Breadth : Broader than the duty to indemnify; exists even if the lawsuit is ultimately groundless, false, or fraudulent.

Duty to Indemnify (Outcome Obligation) :

Trigger : Arrives only after a final court judgment, arbitration award, or approved settlement establishes actual monetary liability.

Scope : Reimbursement or payment of the actual monetary damages awarded to the third party.

CGL Insurance Integration & Insured Contracts

To guarantee that a subcontractor has the financial backing to fulfill its contractual indemnity duties, prime contractors require specific insurance endorsements.

Insured Contract Definition

Under standard Insurance Services Office (ISO) Commercial General Liability (CGL) policy forms, contractual indemnification claims are excluded unless the subcontract qualifies as an "Insured Contract." An insured contract is defined in the policy to include that part of any contract under which the named insured assumes the tort liability of another party to pay for bodily injury or property damage to a third person.

Additional Insured Endorsements & Waiver of Subrogation

Additional Insured Status : General contractors require subcontractors to endorse their CGL policies using ISO forms CG 20 10 (ongoing operations) and CG 20 37 (completed operations), naming the general contractor and owner as additional insureds.

Waiver of Subrogation : Subcontracts require a waiver of subrogation endorsement, preventing the subcontractor's CGL insurer from suing the general contractor to recover insurance proceeds paid out for jobsite losses.

Waiver of Consequential Damages : Subcontracts routinely include mutual waivers of consequential damages (e.g., lost rental income, financing costs, business interruption) to cap potential liability to direct jobsite damages.

Loading diagram... Duty to Defend vs. Duty to Indemnify Operational Timeline