Study guide

8.4 Lead, Asbestos & Hazardous Material Compliance

Tennessee General Contractor Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Tennessee Licensing Law & Board Governance

1.1 Statutory Framework & Board Oversight 1.2 License Classifications & Project Thresholds 1.3 Qualifying Agent Requirements & Responsibilities 1.4 Unlicensed Contracting Penalties & Enforcement

2 Chapter 2: Licensing Finances, Maintenance & Renewals

2.1 Financial Statements, Working Capital & Monetary Limits 2.2 License Application & Board Review Process 2.3 License Renewal, Reinstatement & Maintenance

3 Chapter 3: Tennessee Lien Law: Rights & Pre-Lien Notices

3.1 Prime vs. Remote Contractor Lien Scope 3.2 Pre-Lien Notices & Notice of Nonpayment 3.3 Notice of Lien & Register Filing Procedures

4 Chapter 4: Tennessee Lien Law: Completion, Priority & Waivers

4.1 Notice of Completion & Statutory Expiration 4.2 Lien Enforcement, Foreclosure & Priority 4.3 Lien Waivers & Discharge of Liens

5 Chapter 5: Construction Contract Law & Tennessee Prompt Pay

5.1 Contract Fundamentals & Agreement Types 5.2 Tennessee Prompt Pay Act of 1991 5.3 Retainage Escrow & Statutory Compliance 5.4 Change Orders, Site Conditions & Dispute Resolution

6 Chapter 6: Subcontractor Agreements & Risk Allocation

6.1 Subcontractor Agreements & Flow-Down Provisions 6.2 Payment Contingencies: Pay-When-Paid vs Pay-If-Paid 6.3 Indemnification, Hold Harmless & Liability Limits

7 Chapter 7: Risk Management, Insurance & Surety Bonds

7.1 Commercial General Liability & Builder's Risk 7.2 Workers' Compensation & TN Services Registry 7.3 Surety Bonds: Bid, Performance & Payment Bonds 7.4 Public Works Bonding & Little Miller Act

8 Chapter 8: TOSHA, Safety Standards & Environmental Rules

8.1 TOSHA Regulations & Workplace Inspections 8.2 OSHA Construction Standards: Fall Protection & Excavation 8.3 HAZCOM, PPE & Environmental Permits 8.4 Lead, Asbestos & Hazardous Material Compliance

9 Chapter 9: Business Entities, Construction Accounting & Tax

9.1 Business Organizations & Formation in TN 9.2 Construction Accounting & Recognition Methods 9.3 Financial Statements & Ratio Analysis 9.4 Payroll Accounting, Taxes & Worker Classification

10 Chapter 10: Estimating, Bidding & Project Management

10.1 Estimating Direct/Indirect Costs & Takeoffs 10.2 Bidding Procedures & Public Bidding Laws 10.3 Project Scheduling, CPM & Quality Control 10.4 Building Codes, Closeout & Exam Navigation

8.4 Lead, Asbestos & Hazardous Material Compliance

Key Takeaways Explain This Topic AI

The EPA Renovation, Repair, and Painting (RRP) Rule (40 CFR Part 745) applies to pre-1978 target housing and child-occupied facilities whenever work disturbs over 6 sq ft of interior or 20 sq ft of exterior paint.

Lead RRP rules require contractor firm certification, assignment of a Certified Renovator, strict containment, prohibition of open-flame/high-heat tools, and cleaning verification retention for 3 years.

Under TOSHA and TDEC Rule Chapter 0400-20-11, written notification must be submitted to TDEC Division of Air Pollution Control at least 10 working days prior to any demolition or renovation involving regulated asbestos-containing material (RACM).

Asbestos abatement involves materials containing >1% asbestos and requires TDEC-accredited contractors, negative pressure containment (-0.02 inches w.g.), wet processing, HEPA filtration, and leak-tight labeled disposal.

RCRA hazardous waste regulations classify generators by volume (VSQG, SQG, LQG), enforce a 90-day storage limit for Large Quantity Generators without a permit, and mandate cradle-to-grave Uniform Hazardous Waste Manifest tracking.

Last updated: July 2026

  • Lead, Asbestos & Hazardous Material Compliance
  • EPA Lead Renovation, Repair, and Painting (RRP) Rule

Lead exposure causes severe neurological damage, particularly in young children. The EPA Renovation, Repair, and Painting (RRP) Rule ( 40 CFR Part 745 ) regulates contractors working on structures built before 1978, the year federal standards banned residential lead-based paint.

Target Housing & Child-Occupied Facilities

Target Housing: Any residential dwelling constructed prior to 1978 (excluding housing for the elderly or persons with disabilities unless children under age 6 reside there).

Child-Occupied Facilities: Buildings (or portions of buildings) constructed prior to 1978 visited regularly by the same child under age 6 (e.g., daycares, preschools, kindergarten classrooms).

Work Disturbance Thresholds

RRP rules are triggered whenever renovation, repair, or painting activities disturb painted surfaces exceeding:

Interior Work: More than 6 square feet of painted surface per room.

Exterior Work: More than 20 square feet of exterior painted surface.

Automatic Coverage: Window replacement or full demolition activities automatically trigger RRP rules regardless of square footage.

Firm Certification & Lead-Safe Work Practices

Firm Certification: General contractors executing covered work must be certified as an EPA Lead-Safe Certified Firm .

Certified Renovator: Contractors must assign at least one Certified Renovator (who has completed an EPA-accredited course) to supervise containment set up, worker training, and cleaning verification.

Prohibited Practices: Open-flame burning or torching, high-temperature heat guns operating above 1,100°F , and power tools (saws, sanders, grinders) operating without HEPA dust-collection attachments.

Containment & Cleanup: Plastic sheeting must extend at least 6 feet in all directions indoors (10 feet outdoors). Following work, contractors must perform HEPA vacuuming, wet wiping, and complete Cleaning Verification (CV) matching or clearance dust sampling. Documentation must be retained for 3 years .

Asbestos Abatement Regulations (TOSHA & TDEC Standards)

Asbestos is a naturally occurring mineral fiber known for fire resistance but highly toxic when inhaled, causing asbestosis, lung cancer, and mesothelioma.

Asbestos Definitions & Inspections

Asbestos-Containing Material (ACM): Any material containing greater than 1 percent (> 1%) asbestos by weight.

Regulated Asbestos-Containing Material (RACM): Includes friable ACM (can be crumbled by hand pressure), or non-friable ACM that has been subjected to sanding, grinding, cutting, or mechanical damage.

Pre-Demolition/Renovation Inspection Mandate: Under EPA NESHAP and TDEC Rule Chapter 0400-20-11 , prior to initiating any renovation or demolition project, the facility owner or general contractor must inspect the structure for the presence of asbestos. Critical Rule: Buildings must be inspected regardless of age; there is no grandfather exemption for newer construction!

Mandatory TDEC Notification Timelines

10-Working-Day Advance Notice: General contractors must submit a formal written TDEC Asbestos Demolition/Renovation Notification form to the TDEC Division of Air Pollution Control at least 10 working days prior to commencing work if:

Renovation involves RACM exceeding 260 linear feet on pipes, 160 square feet on facility components, or 35 cubic feet off facility components, OR

The project involves the demolition of any load-bearing structure , regardless of whether asbestos is present!

Abatement Controls & Contractor Licensing

Licensing: Asbestos abatement must be performed by TDEC-accredited Asbestos Abatement Contractors using certified supervisors and workers.

Engineering Controls: Critical barriers (6-mil polyethylene sheeting), negative pressure ventilation systems maintaining a minimum differential pressure of -0.02 inches water gauge with HEPA filtration, wet removal methods, leak-tight labeled waste bags/drums, and disposal at permitted Class I / Special Waste landfills.

Hazardous Waste Management (RCRA & TDEC Rules)

Contractors generating or handling hazardous waste on construction sites (e.g., waste paint, solvents, stripping compounds, chemical sealers) must comply with the federal Resource Conservation and Recovery Act (RCRA) and TDEC Division of Solid Waste Management rules.

Hazardous Waste Generator Categories

Generators are classified based on the total quantity of hazardous waste produced per calendar month:

Generator Category Monthly Hazard Waste Generation Limit On-Site Storage Time Limit Emergency Plan Requirement

Very Small Quantity Generator (VSQG) ≤ 100 kg \le 100\text{ kg} ≤ 100 kg ( ≈ 220 lbs \approx 220\text{ lbs} ≈ 220 lbs ) No temporal limit (max 1,000 kg total) Basic safety precautions

Small Quantity Generator (SQG) 100 to 1 , 000 kg 100\text{ to }1,000\text{ kg} 100 to 1 , 000 kg ( 220 − 2 , 200 lbs 220 - 2,200\text{ lbs} 220 − 2 , 200 lbs ) 180 days max storage Written emergency procedures & coordinator

Large Quantity Generator (LQG) > 1 , 000 kg > 1,000\text{ kg} > 1 , 000 kg ( > 2 , 200 lbs > 2,200\text{ lbs} > 2 , 200 lbs ) 90 days max storage Full formal Contingency Plan & training

Uniform Hazardous Waste Manifest Tracking

Under RCRA's "cradle-to-grave" tracking system:

Off-site shipments of hazardous waste must be accompanied by an EPA Form 8700-22 (Uniform Hazardous Waste Manifest) .

The manifest tracks waste from initial generator to licensed transporter and designated treatment, storage, or disposal facility (TSDF).

The general contractor must retain signed manifest copies for at least 3 years .

Universal Wastes

Certain common jobsite hazardous items are designated as Universal Wastes (fluorescent lamp bulbs, mercury thermostats, lead-acid batteries, pesticide wastes) to streamline recycling and disposal under simplified management standards, keeping them out of standard municipal construction landfills.