Study guide
8.1 TOSHA Regulations & Workplace Inspections
Tennessee General Contractor Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Tennessee Licensing Law & Board Governance
1.1 Statutory Framework & Board Oversight 1.2 License Classifications & Project Thresholds 1.3 Qualifying Agent Requirements & Responsibilities 1.4 Unlicensed Contracting Penalties & Enforcement
2 Chapter 2: Licensing Finances, Maintenance & Renewals
2.1 Financial Statements, Working Capital & Monetary Limits 2.2 License Application & Board Review Process 2.3 License Renewal, Reinstatement & Maintenance
3 Chapter 3: Tennessee Lien Law: Rights & Pre-Lien Notices
3.1 Prime vs. Remote Contractor Lien Scope 3.2 Pre-Lien Notices & Notice of Nonpayment 3.3 Notice of Lien & Register Filing Procedures
4 Chapter 4: Tennessee Lien Law: Completion, Priority & Waivers
4.1 Notice of Completion & Statutory Expiration 4.2 Lien Enforcement, Foreclosure & Priority 4.3 Lien Waivers & Discharge of Liens
5 Chapter 5: Construction Contract Law & Tennessee Prompt Pay
5.1 Contract Fundamentals & Agreement Types 5.2 Tennessee Prompt Pay Act of 1991 5.3 Retainage Escrow & Statutory Compliance 5.4 Change Orders, Site Conditions & Dispute Resolution
6 Chapter 6: Subcontractor Agreements & Risk Allocation
6.1 Subcontractor Agreements & Flow-Down Provisions 6.2 Payment Contingencies: Pay-When-Paid vs Pay-If-Paid 6.3 Indemnification, Hold Harmless & Liability Limits
7 Chapter 7: Risk Management, Insurance & Surety Bonds
7.1 Commercial General Liability & Builder's Risk 7.2 Workers' Compensation & TN Services Registry 7.3 Surety Bonds: Bid, Performance & Payment Bonds 7.4 Public Works Bonding & Little Miller Act
8 Chapter 8: TOSHA, Safety Standards & Environmental Rules
8.1 TOSHA Regulations & Workplace Inspections 8.2 OSHA Construction Standards: Fall Protection & Excavation 8.3 HAZCOM, PPE & Environmental Permits 8.4 Lead, Asbestos & Hazardous Material Compliance
9 Chapter 9: Business Entities, Construction Accounting & Tax
9.1 Business Organizations & Formation in TN 9.2 Construction Accounting & Recognition Methods 9.3 Financial Statements & Ratio Analysis 9.4 Payroll Accounting, Taxes & Worker Classification
10 Chapter 10: Estimating, Bidding & Project Management
10.1 Estimating Direct/Indirect Costs & Takeoffs 10.2 Bidding Procedures & Public Bidding Laws 10.3 Project Scheduling, CPM & Quality Control 10.4 Building Codes, Closeout & Exam Navigation
8.1 TOSHA Regulations & Workplace Inspections
Key Takeaways Explain This Topic AI
The Tennessee Occupational Safety and Health Act of 1972 (TCA Title 50, Chapter 3) establishes state plan jurisdiction under the Tennessee Department of Labor and Workforce Development, granting TOSHA regulatory authority over private contractors and state/local public sector entities.
The Employer General Duty Clause under TCA § 50-3-105(1) mandates that every contractor furnish employment free from recognized hazards that cause or are likely to cause death or serious physical harm.
Work-related employee fatalities must be reported to TOSHA within 8 hours, whereas in-patient hospitalizations, amputations, or loss of an eye must be reported within 24 hours.
TOSHA workplace inspections are unannounced, conducted by Compliance Officers following a strict priority hierarchy: Imminent Danger, Fatalities/Catastrophes, Employee Complaints/Referrals, Programmed High-Hazard Inspections, and Follow-up Inspections.
TOSHA statutory penalty limits allow civil monetary penalties up to $15,625 per violation for serious or other-than-serious violations, up to $15,625 per day for failure to abate, and up to $156,259 per violation for willful or repeat violations.
Last updated: July 2026
- TOSHA Statutory Authority & Jurisdiction
- Tennessee Occupational Safety and Health Act (TCA Title 50, Chapter 3)
The Tennessee Occupational Safety and Health Act of 1972 (codified in Tennessee Code Annotated as TCA § 50-3-101 et seq. ) establishes the legal framework governing workplace safety and environmental health in Tennessee. Under Section 18 of the Federal Occupational Safety and Health Act of 1970, states are permitted to develop and enforce their own occupational safety and health programs, provided the state standards are "at least as effective as" federal OSHA standards.
Tennessee operates an OSHA-approved State Plan , administered by the Division of Occupational Safety and Health (TOSHA) within the Tennessee Department of Labor and Workforce Development (TDLWD) .
State Plan Jurisdiction vs. Federal OSHA Authority
Understanding jurisdictional boundaries is critical for general contractors operating within Tennessee:
TOSHA Jurisdiction: TOSHA enforces safety and health regulations across all private sector employers operating in Tennessee, as well as all state, county, and municipal public sector entities (including local school districts, public utilities, and municipal works departments).
Federal OSHA Jurisdiction: Federal OSHA retains exclusive enforcement jurisdiction over federal civilian employees, military installations (such as Fort Campbell and Arnold Air Force Base), federal court facilities, United States Postal Service (USPS) operations, maritime activities (barge operations and commercial navigation on navigable waterways like the Mississippi and Tennessee Rivers), and specific operations on Tennessee Valley Authority (TVA) nuclear and hydroelectric facilities.
- Jurisdiction Feature TOSHA (State Plan) Federal OSHA
- Governing Statute TCA Title 50, Chapter 3 29 U.S.C. § 651 et seq. (OSH Act of 1970)
- Enforcing Agency TN Dept of Labor & Workforce Development U.S. Department of Labor (OSHA Region 4)
- Covered Workers Private contractors & State/Local public employees Federal employees, military, maritime, USPS
- Standards Applied Adopted 29 CFR 1926 plus State-specific rules Federal 29 CFR 1926 Construction Standards
- Employer Obligations & Recordkeeping Requirements
- The General Duty Clause
Under TCA § 50-3-105(1) , commonly known as the Employer General Duty Clause , every employer in Tennessee has an affirmative legal duty to:
"Furnish to each of the employer's employees employment and a place of employment free from recognized hazards that are causing or are likely to cause death or serious physical harm to the employer's employees."
This clause applies whenever no specific TOSHA or OSHA standard addresses a recognized jobsite hazard. Conversely, TCA § 50-3-106 imposes a statutory duty on employees to comply with all occupational safety and health standards, rules, and regulations issued under the Act.
TOSHA Injury and Illness Recordkeeping
Contractors employing 10 or more employees must maintain recordkeeping logs of all work-related injuries and illnesses, unless operating in an exempt low-hazard industry classification:
TOSHA Form 300 (Log of Work-Related Injuries and Illnesses): Used to record detailed information regarding every recordable injury or illness within 7 calendar days of notification.
TOSHA Form 300A (Summary of Work-Related Injuries and Illnesses): Annual summary showing total cases, missed workdays, and job transfer days. Must be certified by a company executive and publicly posted at every jobsite and facility from February 1 through April 30 each year.
TOSHA Form 301 (Injury and Illness Incident Report): Detailed narrative report for each recordable case.
Mandatory Incident Reporting Timelines
Contractors must strictly adhere to statutory incident notification timeframes to TOSHA:
Fatalities: Any work-related employee fatality must be reported to TOSHA within 8 hours of the incident or employer knowledge.
Severe Injuries: Any in-patient hospitalization, amputation, or loss of an eye resulting from a work-related incident must be reported to TOSHA within 24 hours .
- The TOSHA Workplace Inspection Process
- Inspection Rights & Advance Notice Rules
By statute (TCA § 50-3-301), TOSHA workplace inspections are conducted without advance notice . Giving unauthorized advance notice of an inspection is a criminal misdemeanor under Tennessee law, punishable by a fine of up to $1,000 , imprisonment for up to 6 months , or both.
TOSHA Inspection Priority Hierarchy
Because Compliance Safety and Health Officers (CSHOs) cannot inspect every construction site, inspections are scheduled according to strict statutory priorities:
Imminent Danger: Conditions where a reasonable expectation exists that death or serious physical harm could occur immediately before the hazard can be eliminated through normal enforcement.
Fatalities and Catastrophes: Incidents involving a worker fatality or the in-patient hospitalization of three or more employees.
Employee Complaints and Referrals: Formal written complaints signed by employees or formal referrals from other government agencies.
Programmed High-Hazard Inspections: Targeted inspections focusing on high-hazard industries or sites with elevated DART (Days Away, Restricted, or Transferred) rates under Site-Specific Targeting (SST) programs.
Follow-Up Inspections: Verifying that previously cited hazards have been abated within mandatory timelines.
The Four Phases of a TOSHA Inspection
Credentials Presentation: The CSHO arrives unannounced, presents official state credentials with photograph, and requests to see the jobsite superintendent or general contractor representative.
Opening Conference: The CSHO explains the purpose, scope, and ground rules of the inspection, reviews safety programs and logs, and allows employer and employee representatives to be selected.
Walkaround Inspection: The CSHO inspects work areas, takes photographs, measures physical dimensions, samples air quality or noise, and conducts private, confidential interviews with non-supervisory workers.
Closing Conference: The CSHO reviews observed safety deficiencies, discusses potential abatement timelines, informs the contractor of appeal rights, but does not issue formal citations at this stage.
Citation Categories & Penalty Structures
TOSHA issues written citations detailing the statutory standard violated, proposed abatement dates, and assessed civil monetary penalties.
Citation Category Description & Legal Basis Statutory Maximum Penalty
Other-than-Serious Directly related to job safety/health but unlikely to cause death or serious harm Up to $15,625 per violation
Serious Violation Substantial probability of death or serious physical harm where employer knew or should have known Up to $15,625 mandatory per violation
Willful Violation Intentional disregard or plain indifference to safety rules Up to $156,259 per violation (Min: ~$11,162)
Repeat Violation Substantially similar violation cited within preceding 5 years Up to $156,259 per violation
Failure to Abate Failure to correct a cited hazard by the final abatement date Up to $15,625 per day past deadline
Contesting Citations
If a general contractor disagrees with a TOSHA citation, proposed penalty, or abatement deadline, the contractor must submit a formal written Notice of Contest to the TOSHA Area Director within 15 working days of receiving the citation. Uncontested citations become final non-appealable orders of the TOSHA Review Commission.