Study guide

4.3 Standard & Specialized Pedicure Procedures

Tennessee Nail Technician License Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Tennessee State Regulations, Licensing & Board Rules

1.1 Board Authority, Licensing Requirements & Education Hours 1.2 Salon Safety, Display & Operational Regulations 1.3 Scope of Practice, Prohibited Acts & Penalties 1.4 Client Records, Inspections & Board Compliance

2 Chapter 2: Safety, Sanitation & Infection Control

2.1 Principles of Infection Control & Microbiology 2.2 Cleaning, Disinfection & Sterilization Procedures 2.3 Single-Use vs. Multi-Use Implements & Storage 2.4 OSHA Regulations, Chemical Safety & SDS 2.5 First Aid & Exposure Incident Procedures

3 Chapter 3: Nail Analysis, Anatomy & Physiology

3.1 Structure & Anatomy of the Nail Unit 3.2 Nail Growth, Physiology & Factors Affecting Health 3.3 Identification of Nail Disorders 3.4 Identification of Nail Diseases & Contraindications

4 Chapter 4: Basic Nail Services — Manicures & Pedicures

4.1 Client Consultation, Health Screening & Service Planning 4.2 Standard & Specialized Manicure Procedures 4.3 Standard & Specialized Pedicure Procedures 4.4 Specialty Manicure/Pedicure Treatments & Paraffin Wax

5 Chapter 5: Nail Products, Chemistry & Enhancements

5.1 Nail Chemistry & Polymerization Principles 5.2 Acrylic (Liquid & Powder) Nail Enhancements 5.3 Light-Cured Gel Enhancements & Gel Polish 5.4 Nail Wraps & Tip Application 5.5 Electric Filing (E-File) Techniques & Safety

6 Chapter 6: Practical Exam & Career Preparation

6.1 PSI National Practical Examination Structure & Timing 6.2 Salon Business Management, Ethics & Professionalism 6.3 Test-Taking Strategies & PSI Exam Day Success

4.3 Standard & Specialized Pedicure Procedures

Key Takeaways Explain This Topic AI

Toenails must be trimmed straight across and filed slightly rounded at the corners to prevent painful ingrown toenails (onychocryptosis).

Callus reduction must be performed gently using a disinfected foot file or pumice stone on damp skin; razor-type callus shavers (Credo blades) are strictly illegal in salon settings due to grave injury and infection risks.

Diabetic pedicure protocols mandate warm (never hot) foot soaks, total avoidance of sharp metal nippers/blades, gentle non-abrasive exfoliation, and thorough drying between toes to prevent tissue damage.

Foot spa basin disinfection requires a strict 3-tier protocol: standard cleaning/disinfection between every client, 10-minute EPA-registered disinfectant soak at end-of-day, and weekly 5% bleach flush overnight or for extended cycle.

Massage techniques during pedicures must focus on the foot and lower leg below the knee, avoiding firm pressure over the shin bone (tibia) or varicose veins.

Last updated: July 2026

Pedicuring is a specialized nail service dedicated to the care, hygiene, and cosmetic enhancement of the feet, ankles, and toenails. Because feet are enclosed in footwear and subjected to significant body weight and friction, pedicures require strict technical knowledge of toenail trimming, safe callus reduction, and rigorous foot spa basin disinfection protocols to prevent cross-contamination and bacterial outbreaks.

Sanitation, Ergonomics, and Foot Bath Preparation

Pedicure services demand proper ergonomics for the technician. The technician must sit on a low, adjustable stool that allows comfortable access to the client's feet without stooping or straining the back.

Preparation and Inspection

Station Inspection : Verify that the pedicure throne or foot bath has been sanitized according to state board regulations.

Water Temperature : Fill the foot bath with warm water heated to 100°F to 104°F (37.7°C to 40°C). Always test water temperature on your inner wrist before inviting the client to submerge their feet. Add an EPA-registered foot soak or liquid detergent.

Antiseptic Spray : Spray technician hands and client feet with a broad-spectrum antiseptic solution.

Physical Foot Inspection : Examine feet for open cuts, severe athlete's foot ( tinea pedis ), plantar warts, weeping ulcers, or severe heel fissures. Refuse service if contagious infections or open wounds are detected.

Soak : Allow the feet to soak for 5 to 10 minutes to soften skin and nails.

Toenail Trimming, Filing, and Cuticle Care

Toenails require distinct handling compared to fingernails due to their thickness and shape.

Toenail Trimming & Filing Rules

Trimming : Lift one foot from the soak bath and pat dry. Use heavy-duty toenail clippers to cut toenails straight across , leaving the free edge slightly beyond the hyponychium tissue.

Preventing Ingrowing : Never curve, round, or cut toenail corners deep into the lateral nail folds. Cutting corners down into sidewalls causes onychocryptosis (ingrown toenails), where the growing nail margin pierces surrounding soft tissue, creating severe pain and bacterial infection.

Filing : File straight across using a medium abrasive file (180-grit), rounding the sharp outer tips just slightly to prevent snagging on hosiery.

Cuticle & Subungual Debris Care

Apply cuticle remover solvent around toenail eponychium folds.

Push back softened eponychium gently using a wooden pusher or metal pusher.

Use a curette —a small, spoon-shaped implement designed specifically for pedicures—to gently scoop out dead cuticle tissue and trapped debris from the lateral nail folds and under the free edge.

Trim only loose hangnails with disinfected toenail nippers.

Callus Reduction Safety & Legal Boundaries

Calluses are thickened, hardened layers of stratum corneum skin formed by repeated friction, pressure, or ill-fitting footwear. Callus reduction softens rough areas while leaving adequate skin protection.

Callus Care Method Tool / Product Legal & Professional Status

Callus Softeners Professional formulas containing urea, salicylic acid, or potassium hydroxide Fully legal; chemically softens hardened keratin for easy smoothing

Manual Foot Filing Disinfected multi-use metal foot file, pumice stone, or single-use abrasive foot file Fully legal; safely smooths softened calluses on damp skin

Razor Blades / Credo Shavers Sharp metal razor blades mounted on handle (Credo blade) STRICTLY ILLEGAL in Tennessee; cutting living tissue is a medical act

Legal Boundary Warning

Cutting or shaving calluses with razor-type blades, Credo blades, or sharp scalpels is strictly illegal for licensed nail technicians in Tennessee and most U.S. jurisdictions. Shaving calluses creates deep wounds, severe infection hazards, and permanent tissue damage. Over-reducing calluses also triggers the body to produce thicker callus tissue as a defense mechanism.

Foot/Leg Massage & Diabetic Precautions

Pedicure massage encompasses the foot and lower leg up to the knee.

Massage Workflow & Ergonomics

Apply rich moisturizing pedicure lotion or massage oil to the foot and lower leg.

Perform smooth effleurage strokes up the calf muscle toward the knee, returning lightly.

Apply circular friction using thumbs across the plantar surface (sole) of the foot and metatarsal pads.

Perform gentle ankle joint rotations to relieve joint stiffness.

Anatomical Precautions : Never apply firm, deep pressure directly over the shin bone (tibia) or over visible varicose veins, as deep pressure can dislodge blood clots or cause severe bruising.

Diabetic Foot Care Precautions

Clients with diabetes require extra care during pedicures:

Water Temperature : Must be strictly warm, not hot (under 100°F), as diabetic neuropathy reduces heat sensation.

No Metal Implements : Avoid sharp metal nippers, curettes, or metal foot files; use wooden sticks and gentle pumice stones only.

Gentle Massage : Use light effleurage only; avoid deep pressure massage.

Thorough Drying : Ensure complete drying between toes to prevent fungal growth ( maceration ).

Foot Spa Basin Disinfection Protocols (Tennessee Board Rules)

Foot spa basins and whirlpool foot baths can harbor harmful bacteria (such as Mycobacterium fortuitum ) if not decontaminated properly. Tennessee State Board rules mandate a strict 3-tier disinfection procedure.

1. Between Every Client Protocol

Drain all water from the pedicure basin or basin liner.

Scrub all interior basin walls, jets, impellers, and intake screens with a clean brush, liquid soap, and warm water to remove all visible organic debris.

Rinse thoroughly with clean water.

Refill basin with clean water and add an EPA-registered hospital-grade disinfectant with bactericidal, virucidal, and fungicidal efficacy.

Turn on jets and circulate the disinfectant solution for a full 10 minutes (or label specified contact time).

Drain solution, rinse with clean water, and dry with a clean paper towel.

2. End-of-Day Sanitation Protocol

Remove intake screens, jet covers, and removable parts; clean off debris with soap, water, and brush.

Submerge removable parts completely in EPA-registered disinfectant for 10 minutes.

Reassemble jet components and fill basin with clean water and EPA disinfectant.

Circulate disinfectant solution through jets for 10 minutes. Turn off system and allow solution to soak in basin overnight (or per state board guidelines).

Drain and rinse in the morning before the first client.

3. Weekly Bleach Flush Protocol

After completing end-of-day cleaning, fill basin with clean water and 5% sodium hypochlorite (household bleach) at a ratio of 1 cup bleach per 5 gallons of water.

Circulate bleach solution through jets for 5–10 minutes.

Allow bleach solution to soak in the system overnight (6–10 hours).

Drain, rinse thoroughly, and flush system with clean water.

Pedicure Logbook Requirement : Technicians must record every cleaning in a dedicated Foot Spa Disinfection Log , noting date, time, disinfectant used, and technician signature for state board inspectors.