Study guide

2.4 OSHA Regulations, Chemical Safety & SDS

Tennessee Nail Technician License Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Tennessee State Regulations, Licensing & Board Rules

1.1 Board Authority, Licensing Requirements & Education Hours 1.2 Salon Safety, Display & Operational Regulations 1.3 Scope of Practice, Prohibited Acts & Penalties 1.4 Client Records, Inspections & Board Compliance

2 Chapter 2: Safety, Sanitation & Infection Control

2.1 Principles of Infection Control & Microbiology 2.2 Cleaning, Disinfection & Sterilization Procedures 2.3 Single-Use vs. Multi-Use Implements & Storage 2.4 OSHA Regulations, Chemical Safety & SDS 2.5 First Aid & Exposure Incident Procedures

3 Chapter 3: Nail Analysis, Anatomy & Physiology

3.1 Structure & Anatomy of the Nail Unit 3.2 Nail Growth, Physiology & Factors Affecting Health 3.3 Identification of Nail Disorders 3.4 Identification of Nail Diseases & Contraindications

4 Chapter 4: Basic Nail Services — Manicures & Pedicures

4.1 Client Consultation, Health Screening & Service Planning 4.2 Standard & Specialized Manicure Procedures 4.3 Standard & Specialized Pedicure Procedures 4.4 Specialty Manicure/Pedicure Treatments & Paraffin Wax

5 Chapter 5: Nail Products, Chemistry & Enhancements

5.1 Nail Chemistry & Polymerization Principles 5.2 Acrylic (Liquid & Powder) Nail Enhancements 5.3 Light-Cured Gel Enhancements & Gel Polish 5.4 Nail Wraps & Tip Application 5.5 Electric Filing (E-File) Techniques & Safety

6 Chapter 6: Practical Exam & Career Preparation

6.1 PSI National Practical Examination Structure & Timing 6.2 Salon Business Management, Ethics & Professionalism 6.3 Test-Taking Strategies & PSI Exam Day Success

2.4 OSHA Regulations, Chemical Safety & SDS

Key Takeaways Explain This Topic AI

OSHA's Hazard Communication Standard mandates that manufacturers provide a standardized 16-section Safety Data Sheet (SDS) for all salon chemicals.

Chemical exposure in nail salons occurs via four primary routes: inhalation (most common), skin/eye absorption, ingestion, and injection.

Local Exhaust Ventilation (LEV) source-capture systems at nail stations must maintain a minimum airflow rate of 50 CFM per desk.

Nitrile gloves must be worn when working with acrylic monomers, primers, and solvents, as vinyl and latex are permeable to salon chemicals.

Salon chemical spill kits must include absorbent clay/pads, neutralizing agents, nitrile gloves, safety goggles, and heavy-duty disposal bags.

Last updated: July 2026

2.4 OSHA Regulations, Chemical Safety & SDS

Nail technicians work daily with complex chemical formulations, including liquid acrylic monomers (EMA), polymer powders, UV gel resins, cyanoacrylate adhesives, acetone, primers, and disinfectants. Federal regulations set by the Occupational Safety and Health Administration (OSHA) protect manicurists from chemical hazards and health risks in the workplace.

OSHA & The Hazard Communication Standard

OSHA was created by Congress under the Occupational Safety and Health Act of 1970 to ensure safe, healthy working conditions. OSHA enforces the Hazard Communication Standard (HCS) (29 CFR 1910.1200), often referred to as the employee's "Right to Know" law.

Under HCS, salon employers must:

Maintain a binder of Safety Data Sheets (SDS) for every chemical product used in the salon, accessible to employees 24/7.

Ensure all chemical containers are clearly labeled with GHS hazard symbols and warnings.

Provide employee training on chemical safety, hazards, and proper PPE.

The 16 Standardized SDS Sections

Under the Globally Harmonized System (GHS), Safety Data Sheets follow a uniform 16-section format:

  • Section Number & Title Critical Information Provided for Salon Safety
  • 1. Identification Product name, manufacturer contact info, emergency phone number
  • 2. Hazard(s) Identification GHS pictograms, signal words ("Danger"/"Warning"), hazard statements
  • 3. Composition / Information Chemical ingredients, CAS numbers, trade secret identifiers
  • 4. First-Aid Measures Symptoms of exposure; emergency response for eye, skin, inhalation, ingestion
  • 5. Fire-Fighting Measures Flash point, suitable extinguishing media, flammable gas hazards
  • 6. Accidental Release Measures Spill cleanup protocols, containment procedures, protective equipment
  • 7. Handling & Storage Safe handling rules, ventilation needs, temperature limits, incompatibilities
  • 8. Exposure Controls / PPE OSHA PELs (Permissible Exposure Limits), TLVs, recommended gloves & masks
  • 9. Physical & Chemical Properties Boiling point, vapor pressure, odor threshold, appearance, solubility
  • 10. Stability & Reactivity Chemical stability, hazardous decomposition products, incompatible substances
  • 11. Toxicological Information Acute/chronic health effects, irritation risks, carcinogenicity ratings
  • 12–16. Ecological & Regulatory Ecological impact, disposal rules, transport safety, federal regulations
  • Chemical Exposure Routes in the Nail Salon

Chemicals enter the body through four distinct pathways during nail services: ┌──────────────────────────────────────────┐

  • │ Four Routes of Entry (Exposure) │
  • └────────────────────┬─────────────────────┘
  • │
  • ┌──────────────────┬───────────────┴───────────────┬──────────────────┐
  • ▼ ▼ ▼ ▼
  • ┌──────────────┐ ┌──────────────┐ ┌──────────────┐ ┌──────────────┐
  • │ INHALATION │ │ ABSORPTION │ │ INGESTION │ │ INGESTION/ │
  • │ Vapors, dust │ │ Skin contact,│ │ Eating food │ │ INJECTION │
  • │ Most common │ │ eye splash │ │ at workstation│ │ Puncture cut │
  • └──────────────┘ └──────────────┘ └──────────────┘ └──────────────┘

Inhalation (Breathing) : The most frequent route of salon exposure. Technicians inhale organic monomer vapors (ethyl methacrylate), acetone fumes, and fine particulate dust produced during manual or electric filing of artificial nail enhancements.

Absorption (Skin & Eye Contact) : Solvents and liquid monomers seep into exposed skin or splash into eyes, causing irritant contact dermatitis, allergic sensitization, or chemical burns.

Ingestion (Swallowing) : Occurs when dust or chemical vapors settle onto food, beverages, or eating utensils kept at the manicure desk.

Injection (Accidental Puncture) : Sharp tools (nippers, e-file bits) puncture the skin, carrying chemical residues directly into the bloodstream.

Ventilation Standards & Source-Capture Systems

General HVAC heating and cooling systems merely circulate air and are insufficient for controlling salon chemical vapors and fine dusts. ┌─────────────────────────────────────────────────────────────────────────┐

  • │ Local Exhaust Ventilation (LEV) Setup │
  • ├─────────────────────────────────────────────────────────────────────────┤
  • │ [ Technician Breathing Zone ] ◄── Pulls dust & vapors AWAY │
  • │ │ │
  • │ ▼ │
  • │ [ Downdraft Desk Vent / Hood ] (Minimum 50 CFM Airflow Rate) │
  • │ │ │
  • │ ▼ │
  • │ [ Activated Carbon Filter ] ──► Absorbs monomer/solvent fumes │
  • │ │ │
  • │ ▼ │
  • │ [ HEPA Filter ] ──────────────► Traps 99.97% of fine nail dust │
  • └─────────────────────────────────────────────────────────────────────────┘
  • Local Exhaust Ventilation (LEV)

OSHA and State Board guidelines require Local Exhaust Ventilation (LEV) source-capture systems at nail workstations:

Airflow Capacity : Must maintain a minimum airflow rate of 50 CFM (cubic feet per minute) per workstation.

Capture Point : Positioned within 6 to 12 inches of the filing area to capture fumes and dust at the source before they reach the technician's breathing zone.

Filtration : Vented outdoors or passed through dual activated carbon (for chemical vapors) and HEPA filters (for particulate dust).

Personal Protective Equipment (PPE)

PPE Type Recommended Material Protection Provided Improper Materials to Avoid

Gloves Nitrile Blocks acrylic monomers (EMA/MMA), acetone, and disinfectants Latex and vinyl (monomers permeate latex/vinyl skin barrier)

Masks N95 Dust Respirator Filters 95% of fine airborne filing dust and particulates Paper surgical masks (do not seal or filter fine dusts)

Eye Protection ANSI Z87.1 Safety Glasses Protects eyes from flying nail chips, dust, and chemical splashes Standard reading glasses (lack side shields)

  • Chemical Storage & Spill Management
  • Safe Chemical Storage Rules

Store chemicals in a cool, dark, dry room away from direct sunlight, open flames, and heat sources (radiators, hot water heaters).

Store flammable liquids (acetone, polish removers, primers) in fire-resistant safety cabinets.

Keep chemicals in original, tightly sealed containers with clear, undamaged hazard labels.

Never store chemicals near food, beverages, or client break areas.

Spill Kit Contents & Cleanup Protocol

Salons must maintain a dedicated chemical spill kit containing:

  • Absorbent clay, vermiculite, or chemical spill pads
  • Neutralizing agent for acid primers
  • Heavy-duty nitrile gloves and ANSI safety goggles
  • Dustpan, broom, and heavy-duty leak-proof chemical disposal bags

Cleanup Procedure : Put on PPE → \rightarrow → Isolate the spill area → \rightarrow → Apply absorbent material → \rightarrow → Sweep up contaminated absorbent → \rightarrow → Seal in heavy-duty bag → \rightarrow → Label as chemical waste and ventilate the salon.