Study guide
1.3 Control Tactics & Resistance Management
Tennessee Pesticide Applicator Certification Exam Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Pest Management Principles & IPM
1.1 Fundamentals of Integrated Pest Management (IPM) 1.2 Pest Identification & Biological Concepts 1.3 Control Tactics & Resistance Management
2 Chapter 2: Federal Pesticide Laws & Regulations
2.1 Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA) & EPA Oversight 2.2 Worker Protection Standard (WPS) & Agricultural Compliance 2.3 Endangered Species Act, OSHA & Transportation Laws
3 Chapter 3: Tennessee Pesticide Laws & State Regulations
3.1 Tennessee Application of Pesticides Act (TAPA) & TDA Authority 3.2 Tennessee Applicator Certification Categories & Licensing 3.3 State Recordkeeping, Recertification Points & Enforcement
4 Chapter 4: Pesticide Labels & Product Labeling
4.1 Label Parts, Trade Names & Active Ingredients 4.2 Signal Words, Precautionary Statements & Toxicity Ratings 4.3 Mandatory vs. Advisory Statements, REI & PHI Restrictions
5 Chapter 5: Pesticide Formulations & Adjuvants
5.1 Liquid Formulations (EC, S, F, ULV) 5.2 Dry & Misc Formulations (WP, WDG/DF, G, P, Fumigants) 5.3 Adjuvants, Surfactants & Tank Compatibility
6 Chapter 6: Pesticide Toxicology & Human Health
6.1 Human Exposure Routes & Acute vs. Chronic Toxicity 6.2 Symptoms of Pesticide Poisoning (Organophosphates, Carbamates, Synthetics) 6.3 First Aid Procedures & Emergency Medical Care
7 Chapter 7: Personal Protective Equipment (PPE)
7.1 Selection & Care of Protective Clothing and Eye Protection 7.2 Respiratory Protection & Respirator Selection 7.3 PPE Cleaning, Inspection, Storage & WPS Compliance
8 Chapter 8: Environmental Protection & Off-Target Drift
8.1 Pesticide Movement in Soil, Groundwater & Surface Water 8.2 Off-Target Vapor & Spray Drift Mitigation Techniques 8.3 Protecting Non-Target Organisms, Pollinators & Sensitive Sites
9 Chapter 9: Transportation, Storage & Facility Security
9.1 Safe Transportation of Pesticides & DOT Requirements 9.2 Pesticide Storage Facility Design & Safety Standards 9.3 Security Measures, Inventory Control & Spill Prevention
10 Chapter 10: Emergency Response & Spill Cleanup
10.1 Emergency Planning & Spill Response (The 3 C's) 10.2 Decontamination, Spill Kit Supplies & Neutralization 10.3 Incident Reporting Requirements to TDA & Regulatory Agencies
11 Chapter 11: Application Equipment & Tank Mixing
11.1 Types of Application Equipment & Component Selection 11.2 Nozzle Types, Spray Patterns & Droplet Size Management 11.3 Tank-Mixing Procedures, Compatibility Testing & Equipment Cleanout
12 Chapter 12: Calibration Calculations & Area Measurement
12.1 Area & Volume Calculations for Treatment Sites 12.2 Sprayer & Granular Equipment Calibration Procedures 12.3 Active Ingredient & Finished Spray Dilution Mathematics
1.3 Control Tactics & Resistance Management
Key Takeaways Explain This Topic AI
IPM tactics span 5 main categories: cultural, mechanical/physical, biological, chemical, and regulatory/quarantine.
Biological control relies on natural enemies using three strategies: conservation, augmentation, and classic importation.
Pesticide resistance develops through population-level natural selection when repeated applications of a single chemistry select for rare pre-existing resistant individuals.
Standardized IRAC, FRAC, and HRAC numerical group codes on product labels indicate Mode of Action (MoA); rotating trade names with the same MoA group code does NOT prevent resistance.
Effective resistance management requires rotating across distinct MoA group codes, tank-mixing complementary chemistries, and integrating non-chemical control tactics.
Last updated: July 2026
1.3 Control Tactics & Resistance Management
A comprehensive Integrated Pest Management program relies on a diverse set of tactics rather than a single control method. By integrating multiple control strategies, applicators improve pest suppression efficacy while minimizing environmental hazards and delaying the development of pesticide resistance.
Comprehensive IPM Control Tactics
IPM tactics are traditionally grouped into five major operational categories:
1. Cultural Controls
Cultural controls involve modifying standard crop production or land management practices to reduce pest establishment, survival, reproduction, and dispersal. These tactics create an environment less favorable for pests or enhance crop vigor so plants outcompete pests.
Crop Rotation : Interrupts the life cycle of host-specific pests (e.g., corn rootworm, soil-borne fungal pathogens) by planting non-host crops in alternate seasons.
Sanitation : Removing crop residues, diseased leaves, weed borders, and fallen fruit that serve as overwintering sites for insects and pathogens.
Adjusting Planting and Harvest Dates : Timing planting to avoid peak insect emergence periods (e.g., delaying wheat planting until after the "Hessian fly-free date").
Canopy & Soil Management : Optimizing plant spacing and pruning to enhance airflow, reducing leaf moisture duration required for fungal spore germination. Proper fertility and irrigation management maintain plant vigor.
2. Mechanical and Physical Controls
Mechanical and physical controls kill pests directly, block their physical access, or alter physical environmental conditions (temperature, humidity, light) to suppress pests.
Tillage and Cultivation : Uproots weeds, disrupts soil-dwelling insect larvae (such as white grubs), and buries infected plant debris.
Physical Barriers & Exclusion : Installing floating row covers, insect netting, tree trunk guards, fencing, or window screens to prevent pest entry.
Hand-pulling & Mowing : Hand-weeding ornamental beds or mowing weed patches prior to seed head formation.
Thermal Controls : Steam sterilization of greenhouse soil mixes, solarization (covering moist soil with clear plastic film to trap solar heat), or flame weeding.
3. Biological Controls
Biological control uses natural enemies—predators, parasitoids, and pathogens—to suppress pest population densities below economic levels.
Conservation Biological Control : Protecting and preserving naturally occurring beneficial organisms by providing floral resources (nectar/pollen), leaving refuge habitats, and selecting selective pesticides that do not harm non-target predators.
Augmentative Biological Control : Purchasing and releasing commercially reared natural enemies into enclosed or field environments. Examples include releasing Trichogramma parasitic wasps to destroy moth eggs, predatory mites ( Phytoseiulus persimilis ) to control two-spotted spider mites, or applying Bacillus thuringiensis (Bt) bacteria.
Importation (Classic) Biological Control : Introducing specialized natural enemies from a pest's native geographic origin to control invasive non-native pests. Highly regulated by government agencies.
4. Chemical Controls
Chemical controls involve using synthetic or naturally derived chemical compounds (pesticides) to kill, repel, or inhibit pests.
Targeted Chemistries : Selective pesticides target specific pest groups without harming beneficial insects or host plants (e.g., selective herbicides that kill broadleaf weeds in grass turf).
Mode of Action (MoA) : Chemical control should always serve as a tactical component within IPM rather than the sole suppression strategy. When applied, chemicals must be selected based on their specific Mode of Action to prevent resistance.
5. Regulatory Controls (Quarantine and Eradication)
Regulatory controls consist of government-enforced legal mandates, inspections, and quarantine procedures executed by federal (USDA-APHIS) and state (Tennessee Department of Agriculture) agencies to prevent the introduction or domestic spread of invasive pests and noxious weeds.
Quarantines : Enforcing strict movement restrictions on nursery stock, soil, firewood, or agricultural commodities originating from infested regions (e.g., Emerald Ash Borer or Imported Fire Ant quarantine zones).
Phytosanitary Inspections : Inspecting imported plant materials at border ports of entry to certify freedom from regulated pests.
- IPM Tactic Category Core Mechanism Primary Example
- Cultural Modifying management practices / environment Crop rotation, sanitation, adjusted planting dates
Mechanical/Physical Direct physical removal, exclusion, or heat Row covers, tillage, hand-pulling, soil solarization
- Biological Utilization of living natural enemies Releasing predatory mites, applying Bt bio-pesticides
- Chemical Toxicological or physiological disruption Applying selective insecticides, systemic fungicides
- Regulatory Legal mandates, movement limits, quarantines USDA plant import inspections, quarantine zones
- Pesticide Resistance Mechanisms
Pesticide resistance is the inherited ability of a pest population to survive a pesticide application dose that would normally prove lethal to wild-type individuals of that species.
Selection Pressure and Population Shift
Resistance is not developed within an individual organism during its single lifespan; organisms do not "get used to" a chemical. Rather, resistance occurs at the population level through natural selection under intense selection pressure:
Rare, naturally occurring genetic mutants possess pre-existing physiological mechanisms that confer resistance to a specific chemical.
Repeated applications of the same pesticide kill the vast majority of susceptible individuals.
The rare resistant individuals survive, mate with each other, and pass their resistant genes to their offspring.
Over successive generations under continued selection pressure, resistant individuals come to dominate the local population until the pesticide loses all field efficacy.
Major Physiological Mechanisms of Resistance
Target-Site Resistance : A genetic mutation alters the structure of the specific enzyme or receptor binding site inside the pest where the pesticide attaches. The chemical can no longer bind effectively to disrupt vital physiological functions.
Metabolic (Biochemical) Resistance : The pest produces elevated levels of metabolic enzymes (such as cytochrome P450s, esterases, or glutathione S-transferases) that detoxify or break down the chemical before it reaches its target site.
Penetration (Cuticular) Resistance : The pest develops a thicker or waxier outer cuticle that significantly slows the rate at which the pesticide penetrates into the body cavity.
Behavioral Resistance : The pest modifies its behavior to avoid contact with treated surfaces, toxic baits, or sprayed foliage.
Mode of Action (MoA) Rotation & Coding Systems
To help applicators manage resistance effectively, international technical committees established standardized numerical Mode of Action (MoA) classification systems printed prominently on pesticide product labels:
- IRAC : Insecticide Resistance Action Committee (Numerical groups 1 through 32+)
- FRAC : Fungicide Resistance Action Committee (Numerical and letter codes)
- HRAC : Herbicide Resistance Action Committee (Group numbers 1 through 34)
- Critical Applicator Rule
Rotating product brand names or active ingredients with the SAME MoA code DOES NOT prevent resistance!
For example, switching between two different insecticide brands that both contain Group 3A pyrethroids (e.g., permethrin and bifenthrin) maintains continuous selection pressure on the exact same sodium-channel target site. To prevent resistance, applicators MUST rotate across different MoA group numbers (e.g., rotating from a Group 3A pyrethroid to a Group 4A neonicotinoid or Group 28 diamide).
Preventing Resistance Build-Up
Applicators must implement proactive resistance management strategies to preserve chemical efficacy:
Rotate Mode of Action Group Numbers : Never apply consecutive sprays of products sharing the same IRAC, FRAC, or HRAC group number against multi-generation pests within a single growing season.
Tank-Mix Chemistries with Distinct MoAs : Combine two effective pesticides with different MoA group numbers (where permitted by product labels) that target the same pest, ensuring any individual resistant to one chemistry is killed by the partner chemistry.
Integrate Non-Chemical IPM Tactics : Use cultural, mechanical, and biological controls to keep pest populations low, reducing the total frequency of chemical applications required.
Apply at Labeled Rates and Optimal Timings : Avoid applying sub-lethal doses (under-dosing accelerates selection for polygenic resistance). Target vulnerable early insect instars or small weed seedlings.
Preserve Refuge Areas : Leave untreated refuge zones where susceptible pests can survive and interbreed with any resistant individuals surviving in treated areas, diluting resistant genes in the broader gene pool.