Study guide
4.2 Signal Words, Precautionary Statements & Toxicity Ratings
Tennessee Pesticide Applicator Certification Exam Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Pest Management Principles & IPM
1.1 Fundamentals of Integrated Pest Management (IPM) 1.2 Pest Identification & Biological Concepts 1.3 Control Tactics & Resistance Management
2 Chapter 2: Federal Pesticide Laws & Regulations
2.1 Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA) & EPA Oversight 2.2 Worker Protection Standard (WPS) & Agricultural Compliance 2.3 Endangered Species Act, OSHA & Transportation Laws
3 Chapter 3: Tennessee Pesticide Laws & State Regulations
3.1 Tennessee Application of Pesticides Act (TAPA) & TDA Authority 3.2 Tennessee Applicator Certification Categories & Licensing 3.3 State Recordkeeping, Recertification Points & Enforcement
4 Chapter 4: Pesticide Labels & Product Labeling
4.1 Label Parts, Trade Names & Active Ingredients 4.2 Signal Words, Precautionary Statements & Toxicity Ratings 4.3 Mandatory vs. Advisory Statements, REI & PHI Restrictions
5 Chapter 5: Pesticide Formulations & Adjuvants
5.1 Liquid Formulations (EC, S, F, ULV) 5.2 Dry & Misc Formulations (WP, WDG/DF, G, P, Fumigants) 5.3 Adjuvants, Surfactants & Tank Compatibility
6 Chapter 6: Pesticide Toxicology & Human Health
6.1 Human Exposure Routes & Acute vs. Chronic Toxicity 6.2 Symptoms of Pesticide Poisoning (Organophosphates, Carbamates, Synthetics) 6.3 First Aid Procedures & Emergency Medical Care
7 Chapter 7: Personal Protective Equipment (PPE)
7.1 Selection & Care of Protective Clothing and Eye Protection 7.2 Respiratory Protection & Respirator Selection 7.3 PPE Cleaning, Inspection, Storage & WPS Compliance
8 Chapter 8: Environmental Protection & Off-Target Drift
8.1 Pesticide Movement in Soil, Groundwater & Surface Water 8.2 Off-Target Vapor & Spray Drift Mitigation Techniques 8.3 Protecting Non-Target Organisms, Pollinators & Sensitive Sites
9 Chapter 9: Transportation, Storage & Facility Security
9.1 Safe Transportation of Pesticides & DOT Requirements 9.2 Pesticide Storage Facility Design & Safety Standards 9.3 Security Measures, Inventory Control & Spill Prevention
10 Chapter 10: Emergency Response & Spill Cleanup
10.1 Emergency Planning & Spill Response (The 3 C's) 10.2 Decontamination, Spill Kit Supplies & Neutralization 10.3 Incident Reporting Requirements to TDA & Regulatory Agencies
11 Chapter 11: Application Equipment & Tank Mixing
11.1 Types of Application Equipment & Component Selection 11.2 Nozzle Types, Spray Patterns & Droplet Size Management 11.3 Tank-Mixing Procedures, Compatibility Testing & Equipment Cleanout
12 Chapter 12: Calibration Calculations & Area Measurement
12.1 Area & Volume Calculations for Treatment Sites 12.2 Sprayer & Granular Equipment Calibration Procedures 12.3 Active Ingredient & Finished Spray Dilution Mathematics
4.2 Signal Words, Precautionary Statements & Toxicity Ratings
Key Takeaways Explain This Topic AI
Signal words provide an immediate, visible indication of a pesticide's acute toxicity rating, ranging from Category I (highly toxic) to Category IV (relatively non-toxic).
The signal word DANGER-POISON accompanied by the skull and crossbones symbol in red/black designates Category I extreme systemic toxicity (fatal at low doses).
The signal word DANGER alone designates Category I severe, irreversible skin corrosivity or eye damage hazards without high systemic acute toxicity.
WARNING indicates Category II moderate acute toxicity or moderate skin/eye irritation, while CAUTION indicates Category III/IV slight toxicity.
Precautionary statements detail human and animal health hazards, mandatory personal protective equipment (PPE), and emergency First Aid procedures.
Last updated: July 2026
4.2 Signal Words, Precautionary Statements & Toxicity Ratings
Key Principle: The front panel of every pesticide label must display a prominent Signal Word that immediately informs handlers of the product's acute human toxicity risk. The signal word is determined by the most severe hazard presented by any exposure route (oral, dermal, ocular, or inhalation).
When working with agricultural or commercial pesticides, applicators face varying degrees of chemical hazard. Regulatory agencies classify pesticides into four distinct Toxicity Categories based on laboratory testing. Understanding these ratings and reading the associated Precautionary Statements allows applicators to select proper personal protective equipment (PPE) and implement appropriate safety measures before opening a container.
1. Signal Words and Toxicity Hierarchy
The EPA assigns one of four signal words to a pesticide based on acute toxicity testing. The phrase "Keep Out of Reach of Children" must appear directly above or alongside the signal word on every pesticide container panel. [MOST TOXIC] DANGER-POISON ---> DANGER ---> WARNING ---> CAUTION [LEAST TOXIC]
Toxicity Categories and Signal Words Summary Table
Toxicity Category Signal Word Oral LD50 (mg/kg) Estimated Lethal Dose for Adult Primary Hazards
Category I DANGER-POISON (with Skull & Crossbones) 0 to 50 Trace amounts up to 1 teaspoonful Highly toxic or fatal via oral, dermal, or inhalation routes; systemic poison.
Category I DANGER (without Skull & Crossbones) N/A (Corrosive) Irreversible tissue damage Severe, irreversible eye damage or skin corrosivity/destruction.
Category II WARNING 50 to 500 1 teaspoonful to 1 tablespoonful Moderately toxic via oral, dermal, or inhalation routes; severe skin/eye irritation.
Category III CAUTION 500 to 5,000 1 ounce to 1 pint / pound Slightly toxic via oral, dermal, or inhalation routes; mild skin/eye irritation.
Category IV CAUTION (or optional none) > 5,000 Greater than 1 pint / pound Relatively non-toxic; minor or no skin/eye irritation.
2. Distinguishing DANGER-POISON vs. DANGER
One of the most critical safety distinctions on pesticide labels is the difference between products marked DANGER-POISON and those marked DANGER :
DANGER-POISON (Category I Systemic Hazard): Any product that is highly toxic or fatal through systemic exposure (oral ingestion, dermal absorption, or inhalation of vapor/dust) must carry the signal word DANGER alongside the word POISON printed in bold red lettering, accompanied by the iconic skull and crossbones symbol. An oral LD50 of less than 50 mg/kg means that a few drops to a single teaspoonful can kill an average 150-pound adult.
DANGER (Category I Localized Tissue Hazard): If a product carries the signal word DANGER without the word POISON or the skull and crossbones symbol, it is not a fatal systemic poison at low doses. Instead, it presents extreme localized hazard—it is corrosive and can cause irreversible eye blindness or severe chemical burns to the skin.
3. Precautionary Statements
Directly following the signal word, the label presents Precautionary Statements , which explain the specific risks associated with product handling. This section is subdivided into three mandatory subsections:
A. Hazards to Humans and Domestic Animals
This section describes the primary routes of entry (oral, dermal, inhalation, ocular) and lists specific physical health warnings:
Example: "Fatal if swallowed or absorbed through skin. Causes substantial but temporary eye injury. Do not breathe spray mist or vapor."
It informs the handler of specific medical conditions that may be aggravated by exposure and warns against bringing contaminated clothing home.
B. Personal Protective Equipment (PPE) Requirements
The label specifies the minimum protective gear that handlers must wear during mixing, loading, applying, and equipment cleanout. Common required items include:
Coveralls worn over long-sleeved shirt and long pants.
Chemical-resistant gloves (specifying glove material types, such as barrier laminate, butyl rubber, or nitrile).
Chemical-resistant footwear plus socks.
Protective eyewear (goggles, face shields, or safety glasses with side shields).
NIOSH-approved respirators (with specific particulate filters like N95, R95, or organic vapor cartridges).
C. Environmental Hazards
This section alerts applicators to ecological risks, such as toxicity to bees, fish, birds, or aquatic invertebrates, and specifies mandatory buffer zones near water bodies or wildlife habitats.
4. First Aid / Statement of Practical Treatment
Every pesticide label provides explicit emergency instructions under the heading First Aid (formerly called Statement of Practical Treatment ). This section outlines immediate remedial steps to take while medical help is being contacted:
Swallowed (Oral): Specifies whether to give liquids or induce vomiting.
CRITICAL MANDATE: Never induce vomiting if the victim is unconscious, having convulsions, or if the product contains petroleum distillates (e.g., Emulsifiable Concentrates), as vomitus aspirated into the lungs causes fatal chemical pneumonitis.
Skin Exposure (Dermal): Directs the handler to immediately strip off contaminated clothing and rinse skin with plenty of clean water for 15–20 minutes.
Eye Exposure (Ocular): Directs the handler to hold eyes open and rinse slowly and gently with clean water for 15–20 minutes, removing contact lenses after the first 5 minutes.
Inhalation: Directs rescuers to move the victim to fresh air immediately and administer artificial respiration if breathing has stopped.
Note to Physician
Labels for organophosphate and carbamate pesticides include a Note to Physician section. This provides medical doctors with specific antidote protocol (e.g., recommending atropine sulfate or 2-PAM for cholinesterase inhibition) and cautions against contra-indicated medications.