Study guide

2.3 Coinsurance and the Coinsurance Formula

Tennessee Property & Casualty Insurance State

Track your progress as you read

Finished sections get a check mark.

1 Standalone Coverage Map

Standalone Coverage Map: From Blueprint to Study Plan

2 Introduction: Tennessee Property & Casualty Insurance Exam Overview

Tennessee Property & Casualty Exam Overview

3 National Portion: Insurance Fundamentals

1.1 Risk, Hazards, Perils, and the Law of Large Numbers 1.2 Insurable Interest, Indemnity, and Other Insurance Principles 1.3 Insurance Contract Law and Elements 1.4 Policy Structure: Declarations, Insuring Agreement, Conditions, Exclusions 1.5 Parties, Agents vs. Brokers, and Authority

4 National Portion: Property Insurance Concepts

2.1 Causes of Loss / Named-Peril vs. Open-Peril 2.2 Valuation: ACV, Replacement Cost, and Functional Value 2.3 Coinsurance and the Coinsurance Formula 2.4 Deductibles, Limits, and Loss Settlement 2.5 Common Property Policy Conditions and Clauses

5 National Portion: Dwelling Policies (DP)

3.1 Dwelling Policy Forms DP-1, DP-2, DP-3 3.2 Dwelling Coverages A-E and Other Coverages 3.3 Dwelling Perils, Conditions, and Endorsements 3.4 Mobile Home and Specialized Dwelling Coverage

6 National Portion: Homeowners Policies - Forms & Section I

4.1 Homeowners Forms HO-2 through HO-8 and Eligibility 4.2 Section I Coverages A-D and Additional Coverages 4.3 Section I Perils Insured Against and Exclusions 4.4 Replacement Cost vs. ACV and Loss Settlement in Homeowners

7 National Portion: Homeowners Policies - Section II & Endorsements

5.1 Section II Coverages E (Liability) and F (Medical Payments) 5.2 Homeowners Conditions and Duties After Loss 5.3 Common Homeowners Endorsements (scheduled property, water backup, ordinance or law)

8 National Portion: Personal Auto Policy - Liability & Injury

6.1 Personal Auto Policy Structure and Eligibility 6.2 Part A Liability and Supplementary Payments 6.3 Part B Medical Payments 6.4 Part C Uninsured/Underinsured Motorists

9 National Portion: Personal Auto Policy - Physical Damage & Duties

7.1 Part D: Coverage for Damage to Your Auto 7.2 Part D Exclusions and Part E Duties After an Accident 7.3 Part F General Provisions, Endorsements, and No-Fault Concepts

10 National Portion: Liability Insurance Concepts

8.1 Negligence, Torts, and Legal Liability 8.2 Defenses, Damages, and Vicarious Liability 8.3 Occurrence vs. Claims-Made Triggers 8.4 Bodily Injury, Property Damage, and Personal/Advertising Injury

11 National Portion: Commercial Property Insurance

9.1 Commercial Package Policy Structure and Common Policy Conditions 9.2 Building and Personal Property Coverage Form (BPP) 9.3 Causes of Loss Forms (Basic, Broad, Special) 9.4 Business Income and Extra Expense 9.5 Commercial Property Endorsements and the BOP

12 National Portion: Commercial General Liability - Coverages

10.1 CGL Coverage A: Bodily Injury and Property Damage Liability 10.2 CGL Coverage B: Personal and Advertising Injury, Coverage C: Medical Payments 10.3 Who Is an Insured and Supplementary Payments

13 National Portion: Commercial General Liability - Limits, Triggers & Exclusions

CGL Limits of Insurance and Aggregates Occurrence vs. Claims-Made CGL and Retroactive Dates Key CGL Exclusions and Endorsements

14 National Portion: Commercial Auto Insurance

12.1 Business Auto Coverage Form and Covered Auto Symbols 12.2 Commercial Auto Liability and Physical Damage 12.3 Motor Carrier / Trucking and MCS-90 12.4 Garage Coverage Form and Garagekeepers 12.5 Commercial Auto Endorsements

15 National Portion: Workers Compensation

13.1 Workers Compensation Statutory Background and Benefits 13.2 Part One (Workers Comp) and Part Two (Employers Liability) 13.3 Premium Basis, Experience Modification, and Classification 13.4 Other States, USL&H, and Federal Acts 13.5 Workers Comp Exclusions and Endorsements

16 National Portion: Other Commercial Lines - BOP, Crime & Marine

14.1 Businessowners Policy (BOP) in Depth 14.2 Crime and Fidelity Coverage 14.3 Inland Marine and Nationwide Marine Definition 14.4 Ocean Marine Coverages (Hull, Cargo, Freight, P&I)

17 National Portion: Other Commercial Lines - Specialty & Professional

15.1 Farm and Agricultural Coverage 15.2 Commercial Umbrella and Excess Liability 15.3 Professional Liability and Errors & Omissions 15.4 Directors & Officers and Employment Practices Liability

18 National Portion: Other Commercial Lines - Surety, Flood & Specialty

16.1 Surety and Fidelity Bonds 16.2 National Flood Insurance Program (NFIP) 16.3 Cyber, Aviation, and Other Specialty Lines

19 National Portion: Insurance Regulation & Market Conduct

17.1 State Regulation, Licensing, and the McCarran-Ferguson Act 17.2 Rates, Forms, Solvency, and Guaranty Associations 17.3 Producer Authority, Fiduciary Duty, and Company Operations

20 National Portion: Ethics & Unfair Trade Practices

18.1 Unfair Trade Practices and Unfair Claims Settlement 18.2 Producer Ethics, Errors & Omissions Exposure, and Fiduciary Conduct 18.3 Privacy, Fraud, and Consumer Protection

21 Chapter 1: Tennessee P&C Insurance Regulation & Licensing

1.1 Tennessee Department of Commerce & Insurance (TDCI) 1.2 Tennessee P&C Producer Licensing 1.3 Unfair Trade Practices & Producer Ethics

22 Chapter 2: Tennessee Property Insurance

2.1 Tennessee Homeowners Insurance 2.2 Tennessee Dwelling Insurance 2.3 Tennessee Commercial Property Insurance

23 Chapter 3: Tennessee Casualty Insurance

3.1 Tennessee Auto Insurance Requirements 3.2 Personal Auto Policy (PAP) Coverage 3.3 General Liability Insurance 3.4 Tennessee Workers' Compensation Insurance

2.3 Coinsurance and the Coinsurance Formula

Key Takeaways Explain This Topic AI

Coinsurance formula: Recovery = (Did / Should) × Loss − Deductible, capped at the policy limit.

'Should' = coinsurance % × full property value at the time of loss; 'Did' = the limit carried.

The penalty applies only when Did < Should; over-insuring earns no bonus (factor capped at 1.0).

Apply the (Did/Should) factor before subtracting the deductible; Agreed Value or Inflation Guard endorsements relieve coinsurance.

Last updated: June 2026

Why Coinsurance Exists

Most property losses are partial , not total. If insurers charged the same rate regardless of how much coverage an insured bought, everyone would insure to a fraction of value, collect on small losses, and the rate base would collapse. The coinsurance clause forces the insured to carry coverage equal to a stated percentage of the property's full value — usually 80%, 90%, or 100% — in exchange for an adequate rate.

If the insured complies, partial losses are paid in full (up to the limit, after deductible). If the insured carries less than the required amount, the coinsurance penalty applies and the insured becomes a co-insurer , sharing the loss proportionally.

The Coinsurance Formula

The formula the exam expects you to apply:

Recovery = (Did / Should) × Loss − Deductible

Where:

  • Did = the limit of insurance actually carried
  • Should = the amount required (coinsurance % × full property value at time of loss)
  • Loss = amount of the covered loss
  • Recovery is capped at the policy limit (you never collect more than the limit)

The penalty applies only when Did < Should . If Did ≥ Should, the (Did/Should) factor is treated as 1 (you do not get a bonus for over-insuring).

Worked Example — Penalty Applies

A building is worth $500,000 . The policy has an 80% coinsurance clause, a $400,000 limit, and a $1,000 deductible. A fire causes a $100,000 loss.

  • Should = 80% × $500,000 = $400,000
  • Did = $400,000 (the limit carried)
  • Did ÷ Should = $400,000 ÷ $400,000 = 1.0 — no penalty
  • Recovery = 1.0 × $100,000 − $1,000 = $99,000

Now suppose the insured carried only $300,000 :

  • Should = $400,000 (unchanged)
  • Did ÷ Should = $300,000 ÷ $400,000 = 0.75
  • Recovery = 0.75 × $100,000 − $1,000 = $74,000

The insured absorbs the $25,000 coinsurance penalty plus the deductible because of under-insurance.

Coinsurance Penalty Snapshot

Using the $500,000 building, 80% clause (Should = $400,000), $50,000 loss, $1,000 deductible:

  • Amount Carried (Did) Did/Should Pre-deductible payment Net recovery
  • $400,000 1.00 $50,000 $49,000
  • $350,000 0.875 $43,750 $42,750
  • $300,000 0.75 $37,500 $36,500
  • $200,000 0.50 $25,000 $24,000

Key rules:

Recovery never exceeds the policy limit .

Value is measured at the time of loss , not at policy inception — inflation can pull a compliant insured below the threshold.

An Agreed Value endorsement or an Inflation Guard endorsement suspends/mitigates coinsurance.

Common Traps

Applying the deductible before the coinsurance factor. The correct order is multiply by (Did/Should) first , then subtract the deductible.

Using the limit instead of full value for "Should." "Should" is always coinsurance % × property value , not the limit.

Forgetting the limit cap. Even if the formula yields more than the limit, payment stops at the limit.

Homeowners policies embed an 80% replacement-cost requirement (the HO version of coinsurance) for full RC settlement; below 80%, contents/structure partial losses settle at the greater of ACV or the proportionate RC amount.

Reading the Coinsurance Clause and Choosing a Percentage

The coinsurance clause states a required percentage (commonly 80%, 90%, or 100%) the insured must carry relative to the property's full value to avoid a penalty. A higher coinsurance percentage earns a lower rate because the insurer collects adequate premium across the pool, so insureds trade a stricter insurance-to-value requirement for cheaper coverage. The clause applies the penalty only to partial losses ; a total loss simply pays the policy limit, so coinsurance never reduces a properly limited total-loss payment below the limit.

Step-by-Step Application With a Penalty

Work coinsurance in a fixed order. Compute "Should" = coinsurance % x full value at the time of loss; identify "Did" = the limit actually carried; form the ratio Did/Should (cap it at 1.0, never above); multiply the loss by that ratio; then subtract the deductible ; and never pay more than the limit. For a $1,000,000 warehouse with a 90% clause, "Should" is $900,000. If the insured carried only $720,000, the ratio is 0.80, so a $100,000 loss pays $80,000 before the deductible, the $20,000 shortfall is the coinsurance penalty borne by the insured.

Avoiding the Penalty: Agreed Value and Inflation Guard

Insureds escape coinsurance exposure through options that suspend the clause. Agreed value lets the insurer and insured agree on a value, attach a statement of values, and waive the coinsurance condition for the term, so a partial loss is paid in full up to the limit. Inflation guard automatically raises the limit periodically to keep pace with rising values, helping the insured stay above the required percentage. The exam tests recognizing that an insured repeatedly hit by penalties should request agreed value rather than simply raising the limit guesswork.

Blanket Coverage and Margin Clauses

When one limit covers multiple buildings or locations , the policy uses blanket coinsurance: the required amount is the coinsurance percentage applied to the combined value of all covered property , and the single limit floats across locations. Blanket coverage reduces the chance of a penalty at any one location because the full limit is available wherever the loss occurs.

To curb the broad exposure a blanket limit creates, insurers attach a margin clause (maximum amount payable at any single location, often a percentage of that location's reported value), which caps recovery per site even though the limit is blanket. Candidates should remember that blanket coverage requires a signed statement of values , and that misreporting values can reintroduce a coinsurance-style penalty at audit.