Study guide

17.2 Rates, Forms, Solvency, and Guaranty Associations

Tennessee Property & Casualty Insurance State

Track your progress as you read

Finished sections get a check mark.

1 Standalone Coverage Map

Standalone Coverage Map: From Blueprint to Study Plan

2 Introduction: Tennessee Property & Casualty Insurance Exam Overview

Tennessee Property & Casualty Exam Overview

3 National Portion: Insurance Fundamentals

1.1 Risk, Hazards, Perils, and the Law of Large Numbers 1.2 Insurable Interest, Indemnity, and Other Insurance Principles 1.3 Insurance Contract Law and Elements 1.4 Policy Structure: Declarations, Insuring Agreement, Conditions, Exclusions 1.5 Parties, Agents vs. Brokers, and Authority

4 National Portion: Property Insurance Concepts

2.1 Causes of Loss / Named-Peril vs. Open-Peril 2.2 Valuation: ACV, Replacement Cost, and Functional Value 2.3 Coinsurance and the Coinsurance Formula 2.4 Deductibles, Limits, and Loss Settlement 2.5 Common Property Policy Conditions and Clauses

5 National Portion: Dwelling Policies (DP)

3.1 Dwelling Policy Forms DP-1, DP-2, DP-3 3.2 Dwelling Coverages A-E and Other Coverages 3.3 Dwelling Perils, Conditions, and Endorsements 3.4 Mobile Home and Specialized Dwelling Coverage

6 National Portion: Homeowners Policies - Forms & Section I

4.1 Homeowners Forms HO-2 through HO-8 and Eligibility 4.2 Section I Coverages A-D and Additional Coverages 4.3 Section I Perils Insured Against and Exclusions 4.4 Replacement Cost vs. ACV and Loss Settlement in Homeowners

7 National Portion: Homeowners Policies - Section II & Endorsements

5.1 Section II Coverages E (Liability) and F (Medical Payments) 5.2 Homeowners Conditions and Duties After Loss 5.3 Common Homeowners Endorsements (scheduled property, water backup, ordinance or law)

8 National Portion: Personal Auto Policy - Liability & Injury

6.1 Personal Auto Policy Structure and Eligibility 6.2 Part A Liability and Supplementary Payments 6.3 Part B Medical Payments 6.4 Part C Uninsured/Underinsured Motorists

9 National Portion: Personal Auto Policy - Physical Damage & Duties

7.1 Part D: Coverage for Damage to Your Auto 7.2 Part D Exclusions and Part E Duties After an Accident 7.3 Part F General Provisions, Endorsements, and No-Fault Concepts

10 National Portion: Liability Insurance Concepts

8.1 Negligence, Torts, and Legal Liability 8.2 Defenses, Damages, and Vicarious Liability 8.3 Occurrence vs. Claims-Made Triggers 8.4 Bodily Injury, Property Damage, and Personal/Advertising Injury

11 National Portion: Commercial Property Insurance

9.1 Commercial Package Policy Structure and Common Policy Conditions 9.2 Building and Personal Property Coverage Form (BPP) 9.3 Causes of Loss Forms (Basic, Broad, Special) 9.4 Business Income and Extra Expense 9.5 Commercial Property Endorsements and the BOP

12 National Portion: Commercial General Liability - Coverages

10.1 CGL Coverage A: Bodily Injury and Property Damage Liability 10.2 CGL Coverage B: Personal and Advertising Injury, Coverage C: Medical Payments 10.3 Who Is an Insured and Supplementary Payments

13 National Portion: Commercial General Liability - Limits, Triggers & Exclusions

CGL Limits of Insurance and Aggregates Occurrence vs. Claims-Made CGL and Retroactive Dates Key CGL Exclusions and Endorsements

14 National Portion: Commercial Auto Insurance

12.1 Business Auto Coverage Form and Covered Auto Symbols 12.2 Commercial Auto Liability and Physical Damage 12.3 Motor Carrier / Trucking and MCS-90 12.4 Garage Coverage Form and Garagekeepers 12.5 Commercial Auto Endorsements

15 National Portion: Workers Compensation

13.1 Workers Compensation Statutory Background and Benefits 13.2 Part One (Workers Comp) and Part Two (Employers Liability) 13.3 Premium Basis, Experience Modification, and Classification 13.4 Other States, USL&H, and Federal Acts 13.5 Workers Comp Exclusions and Endorsements

16 National Portion: Other Commercial Lines - BOP, Crime & Marine

14.1 Businessowners Policy (BOP) in Depth 14.2 Crime and Fidelity Coverage 14.3 Inland Marine and Nationwide Marine Definition 14.4 Ocean Marine Coverages (Hull, Cargo, Freight, P&I)

17 National Portion: Other Commercial Lines - Specialty & Professional

15.1 Farm and Agricultural Coverage 15.2 Commercial Umbrella and Excess Liability 15.3 Professional Liability and Errors & Omissions 15.4 Directors & Officers and Employment Practices Liability

18 National Portion: Other Commercial Lines - Surety, Flood & Specialty

16.1 Surety and Fidelity Bonds 16.2 National Flood Insurance Program (NFIP) 16.3 Cyber, Aviation, and Other Specialty Lines

19 National Portion: Insurance Regulation & Market Conduct

17.1 State Regulation, Licensing, and the McCarran-Ferguson Act 17.2 Rates, Forms, Solvency, and Guaranty Associations 17.3 Producer Authority, Fiduciary Duty, and Company Operations

20 National Portion: Ethics & Unfair Trade Practices

18.1 Unfair Trade Practices and Unfair Claims Settlement 18.2 Producer Ethics, Errors & Omissions Exposure, and Fiduciary Conduct 18.3 Privacy, Fraud, and Consumer Protection

21 Chapter 1: Tennessee P&C Insurance Regulation & Licensing

1.1 Tennessee Department of Commerce & Insurance (TDCI) 1.2 Tennessee P&C Producer Licensing 1.3 Unfair Trade Practices & Producer Ethics

22 Chapter 2: Tennessee Property Insurance

2.1 Tennessee Homeowners Insurance 2.2 Tennessee Dwelling Insurance 2.3 Tennessee Commercial Property Insurance

23 Chapter 3: Tennessee Casualty Insurance

3.1 Tennessee Auto Insurance Requirements 3.2 Personal Auto Policy (PAP) Coverage 3.3 General Liability Insurance 3.4 Tennessee Workers' Compensation Insurance

17.2 Rates, Forms, Solvency, and Guaranty Associations

Key Takeaways Explain This Topic AI

Rates must be adequate, not excessive, and not unfairly discriminatory; rating differences based on actual risk are legal.

Rate filing systems range from prior approval to file-and-use, use-and-file, flex rating, and open competition.

Coinsurance penalty = (Did Carry / Should Carry) x Loss − Deductible; ACV = Replacement Cost − Depreciation.

Solvency tools include financial exams, statutory accounting, Risk-Based Capital, reserves, and reinsurance.

Guaranty associations pay claims of insolvent admitted insurers via post-insolvency assessments; surplus lines are not covered and the fund may not be used as a sales inducement.

Last updated: June 2026

Rate Regulation Goals

Every state's rating law shares three goals: rates must be adequate (high enough to keep the insurer solvent), not excessive (not unreasonably high for the coverage), and not unfairly discriminatory (insureds with the same loss exposure pay the same rate). Memorize this triad — it appears on nearly every national exam. Unfair discrimination means charging different rates to insureds of the same class and hazard; charging different rates based on actual differences in risk is legal and expected.

Rate Filing Systems

States use several systems to control how rates take effect:

  • System How it works
  • Prior approval Insurer must file and receive approval before using the rate
  • File-and-use Insurer files, then may use the rate immediately
  • Use-and-file Insurer uses the rate, then files within a set period
  • Modified prior approval Hybrid; prior approval only for certain changes
  • Flex rating Prior approval only if change exceeds a set percentage band
  • Open competition (no-file) Market competition regulates rates; little or no filing

Rating Terminology

Know these terms cold: the rate is the price per unit of exposure ; the exposure unit is the basis of measurement (e.g., $100 of value, per car, per $1,000 of payroll); and the premium = rate x number of exposure units. Pure premium covers expected losses; the loading adds expenses, contingencies, and profit; together they form the gross rate . Manual (class) rating prices large homogeneous groups, while merit/experience rating adjusts a specific insured's premium up or down based on actual loss history.

Advisory Organizations and Loss Costs

Insurers commonly buy data and standardized forms from advisory (rating) organizations such as ISO (Insurance Services Office) . ISO develops loss costs — the pure-premium portion of the rate reflecting expected losses and loss-adjustment expense, but excluding the insurer's own expenses and profit.

ISO also publishes the standardized forms tested on the exam, including the HO-3 (HO 00 03) homeowners special form, the CGL (CG 00 01) occurrence form, the PAP personal auto policy, and the commercial Building and Personal Property Coverage Form (CP 00 10) paired with Causes of Loss forms (CP 10 10 basic / 20 broad / 30 special) . Each insurer multiplies the published loss cost by its own loss cost multiplier (covering expenses and profit) to arrive at the final filed rate.

Worked Example — Coinsurance

Most commercial property and many homeowners forms contain an 80% coinsurance requirement. The penalty formula is:

(Did Carry / Should Carry) x Loss − Deductible = Payment

A building valued at $500,000 must be insured to at least 80% = $400,000 . The owner carries only $300,000 and has a $10,000 partial loss with a $1,000 deductible:

  • Should carry = 0.80 x 500,000 = $400,000
  • Ratio = 300,000 / 400,000 = 0.75
  • 0.75 x 10,000 = 7,500 − 1,000 deductible = $6,500 paid

The insured absorbs the rest as a coinsurance penalty for underinsuring. Note that coinsurance only penalizes partial losses; had the insured carried at least the required amount, the loss would be paid in full up to the limit. The deductible is always subtracted after applying the coinsurance ratio.

Worked Example — ACV vs. Replacement Cost

Actual Cash Value (ACV) = Replacement Cost − Depreciation. A roof costs $12,000 to replace and is 60% through a useful life (60% depreciated):

  • Depreciation = 0.60 x 12,000 = $7,200
  • ACV = 12,000 − 7,200 = $4,800

Under an ACV settlement the insurer pays $4,800 (less any deductible). Under a Replacement Cost (RC) settlement the insurer pays the full $12,000, typically on a two-step basis: ACV first, then the depreciation holdback once repairs are actually completed.

Solvency Oversight

Keeping insurers able to pay claims is the heart of regulation. Core tools include:

Financial examinations , typically every 3–5 years.

Annual statements filed on the NAIC blank using statutory accounting (SAP) , which is more conservative than GAAP.

Risk-Based Capital (RBC) — a formula setting minimum capital relative to risk; falling below thresholds triggers escalating action up to mandatory control / seizure .

Reserves — loss reserves and unearned premium reserves.

Reinsurance to spread large or catastrophic exposure.

Guaranty Associations

Every state has a guaranty association that pays the covered claims of insolvent admitted (licensed) insurers . It is funded by assessments on solvent member insurers doing business in that state — not by taxpayers and not pre-funded in advance. Coverage is subject to per-claim and aggregate caps set by state law.

Two guaranty-association traps appear constantly on the exam:

Guaranty funds protect policyholders of admitted insurers only; surplus lines / non-admitted insurers are not covered, which is why agents must give insureds a surplus-lines disclosure.

Producers may not advertise or use the existence of the guaranty association as an inducement to buy insurance — doing so is an unfair trade practice subject to fines and license action.

Other Valuation Methods

Beyond ACV and replacement cost, the exam contrasts these valuation bases:

Functional replacement cost — repair with reasonable modern materials of like function (e.g., plaster replaced with drywall).

Agreed value / stated value — a value set in advance for hard-to-value property such as fine art; suspends the coinsurance clause.

Market value — sale price including land; generally not used for building physical-damage settlement.

Valued policy laws — in some states a total loss to a structure pays the full face amount regardless of ACV.