Study guide

13.2 Part One (Workers Comp) and Part Two (Employers Liability)

Tennessee Property & Casualty Insurance State

Track your progress as you read

Finished sections get a check mark.

1 Standalone Coverage Map

Standalone Coverage Map: From Blueprint to Study Plan

2 Introduction: Tennessee Property & Casualty Insurance Exam Overview

Tennessee Property & Casualty Exam Overview

3 National Portion: Insurance Fundamentals

1.1 Risk, Hazards, Perils, and the Law of Large Numbers 1.2 Insurable Interest, Indemnity, and Other Insurance Principles 1.3 Insurance Contract Law and Elements 1.4 Policy Structure: Declarations, Insuring Agreement, Conditions, Exclusions 1.5 Parties, Agents vs. Brokers, and Authority

4 National Portion: Property Insurance Concepts

2.1 Causes of Loss / Named-Peril vs. Open-Peril 2.2 Valuation: ACV, Replacement Cost, and Functional Value 2.3 Coinsurance and the Coinsurance Formula 2.4 Deductibles, Limits, and Loss Settlement 2.5 Common Property Policy Conditions and Clauses

5 National Portion: Dwelling Policies (DP)

3.1 Dwelling Policy Forms DP-1, DP-2, DP-3 3.2 Dwelling Coverages A-E and Other Coverages 3.3 Dwelling Perils, Conditions, and Endorsements 3.4 Mobile Home and Specialized Dwelling Coverage

6 National Portion: Homeowners Policies - Forms & Section I

4.1 Homeowners Forms HO-2 through HO-8 and Eligibility 4.2 Section I Coverages A-D and Additional Coverages 4.3 Section I Perils Insured Against and Exclusions 4.4 Replacement Cost vs. ACV and Loss Settlement in Homeowners

7 National Portion: Homeowners Policies - Section II & Endorsements

5.1 Section II Coverages E (Liability) and F (Medical Payments) 5.2 Homeowners Conditions and Duties After Loss 5.3 Common Homeowners Endorsements (scheduled property, water backup, ordinance or law)

8 National Portion: Personal Auto Policy - Liability & Injury

6.1 Personal Auto Policy Structure and Eligibility 6.2 Part A Liability and Supplementary Payments 6.3 Part B Medical Payments 6.4 Part C Uninsured/Underinsured Motorists

9 National Portion: Personal Auto Policy - Physical Damage & Duties

7.1 Part D: Coverage for Damage to Your Auto 7.2 Part D Exclusions and Part E Duties After an Accident 7.3 Part F General Provisions, Endorsements, and No-Fault Concepts

10 National Portion: Liability Insurance Concepts

8.1 Negligence, Torts, and Legal Liability 8.2 Defenses, Damages, and Vicarious Liability 8.3 Occurrence vs. Claims-Made Triggers 8.4 Bodily Injury, Property Damage, and Personal/Advertising Injury

11 National Portion: Commercial Property Insurance

9.1 Commercial Package Policy Structure and Common Policy Conditions 9.2 Building and Personal Property Coverage Form (BPP) 9.3 Causes of Loss Forms (Basic, Broad, Special) 9.4 Business Income and Extra Expense 9.5 Commercial Property Endorsements and the BOP

12 National Portion: Commercial General Liability - Coverages

10.1 CGL Coverage A: Bodily Injury and Property Damage Liability 10.2 CGL Coverage B: Personal and Advertising Injury, Coverage C: Medical Payments 10.3 Who Is an Insured and Supplementary Payments

13 National Portion: Commercial General Liability - Limits, Triggers & Exclusions

CGL Limits of Insurance and Aggregates Occurrence vs. Claims-Made CGL and Retroactive Dates Key CGL Exclusions and Endorsements

14 National Portion: Commercial Auto Insurance

12.1 Business Auto Coverage Form and Covered Auto Symbols 12.2 Commercial Auto Liability and Physical Damage 12.3 Motor Carrier / Trucking and MCS-90 12.4 Garage Coverage Form and Garagekeepers 12.5 Commercial Auto Endorsements

15 National Portion: Workers Compensation

13.1 Workers Compensation Statutory Background and Benefits 13.2 Part One (Workers Comp) and Part Two (Employers Liability) 13.3 Premium Basis, Experience Modification, and Classification 13.4 Other States, USL&H, and Federal Acts 13.5 Workers Comp Exclusions and Endorsements

16 National Portion: Other Commercial Lines - BOP, Crime & Marine

14.1 Businessowners Policy (BOP) in Depth 14.2 Crime and Fidelity Coverage 14.3 Inland Marine and Nationwide Marine Definition 14.4 Ocean Marine Coverages (Hull, Cargo, Freight, P&I)

17 National Portion: Other Commercial Lines - Specialty & Professional

15.1 Farm and Agricultural Coverage 15.2 Commercial Umbrella and Excess Liability 15.3 Professional Liability and Errors & Omissions 15.4 Directors & Officers and Employment Practices Liability

18 National Portion: Other Commercial Lines - Surety, Flood & Specialty

16.1 Surety and Fidelity Bonds 16.2 National Flood Insurance Program (NFIP) 16.3 Cyber, Aviation, and Other Specialty Lines

19 National Portion: Insurance Regulation & Market Conduct

17.1 State Regulation, Licensing, and the McCarran-Ferguson Act 17.2 Rates, Forms, Solvency, and Guaranty Associations 17.3 Producer Authority, Fiduciary Duty, and Company Operations

20 National Portion: Ethics & Unfair Trade Practices

18.1 Unfair Trade Practices and Unfair Claims Settlement 18.2 Producer Ethics, Errors & Omissions Exposure, and Fiduciary Conduct 18.3 Privacy, Fraud, and Consumer Protection

21 Chapter 1: Tennessee P&C Insurance Regulation & Licensing

1.1 Tennessee Department of Commerce & Insurance (TDCI) 1.2 Tennessee P&C Producer Licensing 1.3 Unfair Trade Practices & Producer Ethics

22 Chapter 2: Tennessee Property Insurance

2.1 Tennessee Homeowners Insurance 2.2 Tennessee Dwelling Insurance 2.3 Tennessee Commercial Property Insurance

23 Chapter 3: Tennessee Casualty Insurance

3.1 Tennessee Auto Insurance Requirements 3.2 Personal Auto Policy (PAP) Coverage 3.3 General Liability Insurance 3.4 Tennessee Workers' Compensation Insurance

13.2 Part One (Workers Comp) and Part Two (Employers Liability)

Key Takeaways Explain This Topic AI

The NCCI policy WC 00 00 00 C bundles Part One (statutory benefits, no dollar limit) and Part Two (Employers Liability, with dollar limits).

Part One pays whatever the state workers compensation law requires for states listed in Item 3.A. of the Information Page.

Part Two covers employer legal liability outside the WC statute: third-party-over actions, consequential injury, dual-capacity, and loss of services.

Part Two uses three limits: BI by accident (each accident), BI by disease (policy aggregate), and BI by disease (each employee); standard is $100,000/$500,000/$100,000.

Last updated: June 2026

The standard NCCI policy

For private-market business, almost every state uses the NCCI Workers Compensation and Employers Liability Insurance Policy (form WC 00 00 00 C) . The policy is unusual because it has two very different insuring agreements bundled into one contract: Part One (the statutory benefits) and Part Two (a true liability coverage). Understanding the split is the single most-tested concept in this domain.

Part One — Workers Compensation

Part One says the insurer will pay promptly all benefits required by the workers compensation law of any state listed in Item 3.A. of the Information Page . Key features:

No dollar limit. Part One has no policy limit because the obligation is whatever the state statute requires — medical is unlimited and indemnity follows the state schedule.

The insurer's duty is defined by statute, not by the policy's own dollar figures.

If the insurer pays benefits it did not owe (because the law did not require them), the insured must reimburse the insurer.

Part One is essentially the insurer stepping into the employer's statutory shoes.

Why Part One has no limit

New producers often look for a Part One limit on the Information Page and cannot find one — by design. Because the employer's obligation is whatever the state statute mandates, the policy promises to mirror that obligation without capping it in dollars. If the legislature raises benefit levels mid-term, the insurer's Part One promise rises with the law.

This is also why medical benefits are first-dollar and unlimited : there is no deductible, no coinsurance, and no aggregate. Contrast this with a health plan. The only Part One 'limits' are the statutory schedules themselves (e.g., a scheduled number of weeks for loss of a thumb), which come from the law, not the policy.

Part Two — Employers Liability

Part Two is a liability coverage that pays for bodily injury by accident or disease for which the employer is legally liable but that falls outside the workers compensation statute . It fills the gaps the no-fault system does not reach. Classic Part Two exposures:

Third-party-over actions — an injured worker sues a manufacturer, who then sues the employer for contribution.

Consequential bodily injury — injury to a spouse or family member (e.g., loss of consortium).

Dual-capacity suits — the employer is sued in a non-employer role (e.g., as product manufacturer).

Loss of services of the injured employee.

Part Two has dollar limits shown on the Information Page (Item 3.B.).

The Part Two limit structure

Employers Liability uses three limits, often written as a split such as $1,000,000 / $1,000,000 / $1,000,000 (a common upgrade from the standard $100,000/$500,000/$100,000):

  • Limit Applies to Basis
  • Bodily Injury by Accident Each accident Per-accident limit, all employees in one accident
  • Bodily Injury by Disease Policy limit (aggregate) Maximum for ALL disease claims during the policy period
  • Bodily Injury by Disease Each employee Per-employee limit for disease

Trap: the accident limit is per accident (regardless of number of employees), while the disease limits are split into a per-policy aggregate AND a per-employee cap. Standard limits are $100,000 each accident / $500,000 disease policy limit / $100,000 disease each employee.

Worked Part Two example

Part Two limits are $100,000 / $500,000 / $100,000. A boiler explosion injures four employees in one accident; their employer-liability damages (outside WC) total $260,000.

This is bodily injury by accident , so the each-accident limit of $100,000 applies to the entire accident.

The insurer pays $100,000 ; the employer is exposed for the remaining $160,000.

Note how a single per-accident limit governs all four workers together — it is not multiplied per person.

Worked Part Two disease example

Now apply the two disease limits. Same policy, $100,000 / $500,000 / $100,000. Over the policy year, factory fumes cause occupational lung disease in eight employees; employer-liability damages run $90,000 each ($720,000 total).

The each-employee disease limit of $100,000 caps each claim, so each of the eight $90,000 claims is payable in full.

BUT the disease policy limit (aggregate) of $500,000 caps the total for all disease claims combined.

The insurer pays a maximum of $500,000 ; the remaining $220,000 of valid claims is uncovered.

Lesson: the disease aggregate can be exhausted even when no single claim hits the per-employee cap. Accident has one limit; disease has two.

How the two parts interact

Most real claims are pure Part One statutory-benefit claims — the worker is hurt, files for benefits, and never sues. Part Two only activates when someone tries to hold the employer legally liable for an employment-related injury outside the statute.

The most heavily tested Part Two trigger is the third-party-over (action over) suit: a worker injured by a machine sues the machine manufacturer (a third party not protected by exclusive remedy); the manufacturer then sues the employer for indemnity or contribution, alleging the employer's misuse caused the loss. Exclusive remedy blocks the worker from suing the employer directly, but it does NOT block the manufacturer's claim — so Part Two responds.