Study guide

6.2 Meshed Gears (Çarklar), Concentric Pulleys, Belt Directions & Turn Ratios

TR-YÖS 2026 — Türkiye Yurt Dışından Öğrenci Kabul Sınavı Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: TR-YÖS Overview, Eligibility & Admissions Strategy

1.1 Current TR-YÖS Identity, Two-Test Blueprint and Admissions 1.2 Candidate Eligibility, Blue Card (Mavi Kart), Dual Citizenship & Registration 1.3 ÖSYM Scoring Mathematics, the 0.5 Raw-Point Rule, 1/4 Penalty & 100-Minute Pacing

2 Chapter 2: Sayısal Yetenek — Number Series, Sequences & Cryptarithmetic

2.1 Linear, Polynomial, Alternating & Recursive Number Series (Sayı Dizileri) 2.2 Number Matrices, Row-Column Operations & Functional Input-Output Tables 2.3 Cryptarithmetic (Harfli İşlemler), Letter-Digit Coding (Şifreler) & Symbolic Operators

3 Chapter 3: Sayısal Yetenek — Visual Series, Analogies & Odd-One-Out

3.1 Figural Series, Angular Rotations, Translations & Element-Counting Rules 3.2 Visual Analogies, Geometric Transformations & Proportion Mapping 3.3 Visual Classification, Topological Invariants & Odd-One-Out (Farklı Olanı Bulma)

4 Chapter 4: Sayısal Yetenek — Visual Matrices, Pattern Completion & Grid Logic

4.1 3x3 Visual Matrices: Superposition, Boolean XOR & Attribute Permutations 4.2 Pattern & Grid Completion (Şekil Tamamlama), Quarter-Tile Symmetry & Tessellations 4.3 Magic Squares, Latin Grids, Sudoku Variants & Relational Matrix Tables

5 Chapter 5: Sayısal Yetenek — 3D Spatial Reasoning: Cubes, Folding & Reflections

5.1 3D Block Stacks, Hidden Cube Counting & Painted Cube Formulas (Küp Sayma) 5.2 Cube Nets (Küp Açılımları), Opposite-Face Parities & 3D Die Rotations 5.3 Paper Folding & Hole Punching (Kağıt Katlama-Kesme), Mirror & Water Reflections

6 Chapter 6: Sayısal Yetenek — Balance Scales, Gears, Clocks & Calendar Logic

6.1 Balance Scales (Teraziler), Symbolic Weight Substitution & Inequality Scales 6.2 Meshed Gears (Çarklar), Concentric Pulleys, Belt Directions & Turn Ratios 6.3 Clock Hand Angles (Saat Problemleri), Modular Calendar Arithmetic & Compass Bearings

7 Chapter 7: Sayısal Yetenek — Data Interpretation, Grid Counting & Deductive Logic

7.1 Bar, Line and Pie Charts & Multi-Table Data Interpretation (Tablo ve Grafikler) 7.2 Grid Perimeter, Shaded Area, Sub-Shape Counting & Shortest Lattice Paths 7.3 Deductive Logic, Linear/Circular Seating Arrangements & Truth-Value Puzzles

8 Chapter 8: Temel Matematik — Number Systems, Base Arithmetic, Divisibility & Rationals

8.1 Number Sets, Parity, Consecutive Sums, Factorials & Base-n Arithmetic (Taban Aritmetiği) 8.2 Division Algorithm, Divisibility Rules, Prime Factorization, Divisors, EBOB (GCD) & EKOK (LCM) 8.3 Rational Numbers, Infinite/Telescoping Fractions & Repeating Decimals (Devirli Ondalık Sayılar)

9 Chapter 9: Temel Matematik — Exponents, Radicals, Factoring, Equations & Inequalities

9.1 Exponential Equations (Üslü Sayılar), Nested Radicals & Rationalizing Denominators 9.2 Algebraic Identities (Çarpanlara Ayırma), Sums and Differences of Cubes & Reciprocal Sums 9.3 First-Degree Linear Systems, Simple Inequalities (Basit Eşitsizlikler) & Absolute Value (Mutlak Değer)

10 Chapter 10: Temel Matematik — Ratios, Proportions & Classic Word Problems

10.1 Ratios, Direct/Inverse/Compound Proportions (Oran-Orantı) & Means 10.2 Number, Fraction, Age (Yaş) & Work/Pipe (İşçi-Havuz) Word Problems 10.3 Percentage, Profit-Loss (Kâr-Zarar), Mixture (Karışım) & Motion (Hareket) Problems

11 Chapter 11: Temel Matematik — Sets, Modular Operations, Functions, Polynomials & Quadratics

11.1 Sets (Kümeler), Cartesian Products, Binary Operations (İşlem) & Modular Arithmetic (Modüler Aritmetik) 11.2 Functions (Fonksiyonlar): Domain/Range, Composition, Inverses & Functional Equations 11.3 Polynomials (Polinomlar), Quadratic Equations, Vieta's Formulas & Parabolas

12 Chapter 12: Temel Matematik — Logarithms, Complex Numbers, Combinatorics, Trigonometry & Calculus

12.1 Logarithms (Logaritma), Complex Numbers & Arithmetic/Geometric Sequences (Diziler) 12.2 Permutations, Combinations, Binomial Expansion & Probability (Olasılık) 12.3 Trigonometry and Optional Calculus Enrichment

13 Chapter 13: Temel Matematik (Geometri) — Angles, Triangles, Similarity, Area & Polygons

13.1 Parallel-Line Angle Rules (Z, U, M, Kalem Ucu), Triangle Angles & Triangle Inequality 13.2 Right Triangles, Euclid's Altitude Laws, Angle Bisectors, Medians, Similarity & Area 13.3 Regular Polygons, Quadrilaterals, Parallelograms, Trapezoids, Rhombuses, Rectangles & Squares

14 Chapter 14: Temel Matematik (Geometri) — Circles, 3D Solids & Analytic Geometry

14.1 Circle Angles, Chords, Tangents, Power of a Point (Kuvvet) & Sector/Annulus Area 14.2 3D Solid Geometry (Katı Cisimler): Prisms, Cylinders, Pyramids, Cones & Spheres 14.3 Analytic Geometry (Analitik Geometri): Points, Lines, Slopes, Point-to-Line Distance & Circles

6.2 Meshed Gears (Çarklar), Concentric Pulleys, Belt Directions & Turn Ratios

Key Takeaways Explain This Topic AI

Externally meshed gears (dıştan dişli çarklar) and crossed-belt pulleys (çapraz bağlı kasnaklar) rotate in opposite directions, whereas open-belt pulleys (düz bağlı kasnaklar) rotate in the same direction.

Concentric (eş merkezli / çakışık) gears or pulleys share a rigid central axle, meaning they always rotate in the exact same direction and complete the exact same number of revolutions regardless of their radii.

For any two meshed gears or belt-linked pulleys, the product of revolution count and radius (or tooth count) is conserved: n1 * r1 = n2 * r2 and n1 * T1 = n2 * T2.

In a simple non-concentric chain of meshed gears, odd-numbered gears rotate in the same direction, even-numbered gears rotate in the opposite direction, and a closed triangle of 3 mutually meshed gears jams completely.

To find the visual sector pattern of a divided wheel after n revolutions, discard the integer part of n and advance each colored sector in the wheel's rotation direction by the fractional part multiplied by the total number of equal sectors.

Last updated: October 2026

Meshed Gears (Çarklar), Concentric Pulleys, Belt Directions & Turn Ratios

Quick Method: Solve every gear and pulley problem ( Çarklar ve Kasnaklar ) in two separate passes: Pass 1 (Direction): Trace + (clockwise) and - (counterclockwise) across contacts—flipping sign at external gear teeth and crossed ( X ) belts, and keeping the same sign across open ( = ) belts and concentric axles. Pass 2 (Turn Count): Apply n 1 ⋅ r 1 = n 2 ⋅ r 2 n_1 \cdot r_1 = n_2 \cdot r_2 n 1 ​ ⋅ r 1 ​ = n 2 ​ ⋅ r 2 ​ across teeth/belts and n inner = n outer n_{\text{inner}} = n_{\text{outer}} n inner ​ = n outer ​ on shared concentric axles.

1. The Four Mechanical Coupling Laws

Every connection between two rotating wheels in a TR-YÖS figure belongs to one of four fundamental mechanical couplings:

Law 1: Externally Meshed Gears ( Dıştan Dişli Çarklar ) & Tangent Friction Wheels

When two gears mesh tooth-to-tooth on their outer rims, their contact edges must move in the same linear direction, forcing their centers to rotate in opposite angular directions ( zıt yönlü ):

If Gear 1 turns clockwise ( saat yönünde , CW) , Gear 2 turns counterclockwise ( saat yönünün tersine , CCW) .

In a single linear chain of k k k externally meshed gears ( G 1 − G 2 − G 3 − ⋯ − G k G_1 - G_2 - G_3 - \dots - G_k G 1 ​ − G 2 ​ − G 3 ​ − ⋯ − G k ​ ):

All odd-indexed gears ( G 1 , G 3 , G 5 , … G_1, G_3, G_5, \dots G 1 ​ , G 3 ​ , G 5 ​ , … ) rotate in the same direction .

All even-indexed gears ( G 2 , G 4 , G 6 , … G_2, G_4, G_6, \dots G 2 ​ , G 4 ​ , G 6 ​ , … ) rotate in the opposite direction .

Warning

The Closed-Loop Jamming Trap ( Sıkışma Tuzağı ): If three gears form a closed triangle where G 1 G_1 G 1 ​ meshes with G 2 G_2 G 2 ​ , G 2 G_2 G 2 ​ meshes with G 3 G_3 G 3 ​ , and G 3 G_3 G 3 ​ also meshes directly with G 1 G_1 G 1 ​ , the system locks up and cannot rotate at all ! In general, any closed loop of externally meshed gears can rotate if and only if the cycle contains an even number of gears.

Law 2: Open (Direct) Belt Pulleys ( Düz Bağlı Kasnaklar )

When an uncrossed belt wraps around the outer rims of two pulleys, the top strand pulls the top of both pulleys the same way. Both pulleys rotate in the exact same direction ( aynı yönlü ).

Law 3: Crossed (Figure-8) Belt Pulleys ( Çapraz Bağlı Kasnaklar )

When the belt crosses over itself in an X shape between the two pulleys, the top edge of the driving pulley feeds into the bottom edge of the driven pulley. Therefore, crossed-belt pulleys rotate in opposite directions ( zıt yönlü ), behaving directionally just like externally meshed gears.

Law 4: Concentric / Co-Axial Wheels ( Eş Merkezli / Çakışık Çarklar )

When a smaller gear (or pulley) is bolted concentrically onto the face of a larger gear on the same central axle , they form a single rigid body:

They rotate in the exact same direction ( direction A = direction B \text{direction}_A = \text{direction}_B direction A ​ = direction B ​ ).

They complete the exact same number of revolutions ( n A = n B n_A = n_B n A ​ = n B ​ ), regardless of their radii or tooth counts !

Important

Never Apply n 1 r 1 = n 2 r 2 n_1 r_1 = n_2 r_2 n 1 ​ r 1 ​ = n 2 ​ r 2 ​ Between Two Concentric Gears! Because concentric gears are welded to the same shaft, if the outer wheel of radius 4 r 4r 4 r turns 3 3 3 times, the inner wheel of radius r r r also turns exactly 3 3 3 times ( n inner = n outer = 3 n_{\text{inner}} = n_{\text{outer}} = 3 n inner ​ = n outer ​ = 3 ). You only use n 1 r 1 = n 2 r 2 n_1 r_1 = n_2 r_2 n 1 ​ r 1 ​ = n 2 ​ r 2 ​ when transferring motion from one axle to a different axle via teeth or a belt.

2. The Fundamental Turn-Ratio Conservation Equation

Whenever Wheel 1 drives Wheel 2 on a separate axle via meshed teeth or a non-slipping belt, the linear arc length s = 2 π r ⋅ n s = 2\pi r \cdot n s = 2 π r ⋅ n (or total number of teeth passing the contact point) is identical for both wheels. Consequently, the number of revolutions n n n is inversely proportional to the radius r r r or tooth count T T T : n 1 ⋅ r 1 = n 2 ⋅ r 2 ⟺ n 1 ⋅ T 1 = n 2 ⋅ T 2 n_1 \cdot r_1 = n_2 \cdot r_2 \quad \Longleftrightarrow \quad n_1 \cdot T_1 = n_2 \cdot T_2 n 1 ​ ⋅ r 1 ​ = n 2 ​ ⋅ r 2 ​ ⟺ n 1 ​ ⋅ T 1 ​ = n 2 ​ ⋅ T 2 ​

Intermediate Gear Cancellation in Pure Series Chains

In a pure chain of externally meshed gears G 1 − G 2 − G 3 − ⋯ − G k G_1 - G_2 - G_3 - \dots - G_k G 1 ​ − G 2 ​ − G 3 ​ − ⋯ − G k ​ (with no concentric step-up gears in between): n 1 ⋅ T 1 = n 2 ⋅ T 2 = n 3 ⋅ T 3 = ⋯ = n k ⋅ T k n_1 \cdot T_1 = n_2 \cdot T_2 = n_3 \cdot T_3 = \dots = n_k \cdot T_k n 1 ​ ⋅ T 1 ​ = n 2 ​ ⋅ T 2 ​ = n 3 ​ ⋅ T 3 ​ = ⋯ = n k ​ ⋅ T k ​

Notice that all intermediate gears ( G 2 , G 3 , … , G k − 1 G_2, G_3, \dots, G_{k-1} G 2 ​ , G 3 ​ , … , G k − 1 ​ ) act purely as idler gears : their radii and tooth counts cancel out completely ! The turn ratio between the first and last gear depends only on T 1 T_1 T 1 ​ and T k T_k T k ​ : n k = n 1 ⋅ ( T 1 / T k ) n_k = n_1 \cdot (T_1 / T_k) n k ​ = n 1 ​ ⋅ ( T 1 ​ / T k ​ ) .

  • 3. Patterned Sector Wheels & Load Lifting
  • Patterned Wheel Appearance After Fractional Turns ( Daire Dilimi Görünümü )

Many TR-YÖS items divide a gear into S S S equal pie sectors ( eş daire dilimi —typically S = 4 , 6 , S = 4, 6, S = 4 , 6 , or 8 8 8 ) with one or two shaded wedges, and ask for its visual appearance after a driving gear completes n 1 n_1 n 1 ​ turns:

Compute the driven wheel's exact turn count n 2 n_2 n 2 ​ as a mixed fraction: n 2 = k + a b n_2 = k + \frac{a}{b} n 2 ​ = k + b a ​ , where k ∈ Z k \in \mathbb{Z} k ∈ Z is the whole number of full turns.

Discard k k k completely: Every integer revolution ( 360 ∘ 360^\circ 36 0 ∘ ) restores the wheel to its initial visual state.

Convert the fractional turn a b \frac{a}{b} b a ​ into sector steps: Δ sectors = a b × S \Delta\text{sectors} = \frac{a}{b} \times S Δ sectors = b a ​ × S .

Shift every shaded wedge by Δ sectors \Delta\text{sectors} Δ sectors positions in the driven wheel's rotation direction.

Lifting Hanging Loads & Rolling Wheels ( Yüklerin Yükselmesi ve Yuvarlanma )

Cord Wound Around a Drum of Radius r r r : When a pulley of radius r r r completes n n n revolutions, it winds or unwinds a vertical rope length equal to n n n circumferences: h = n ⋅ ( 2 π r ) h = n \cdot (2\pi r) h = n ⋅ ( 2 π r )

Differential Co-Axial Winch: If Load X X X hangs from an outer drum of radius R R R and Load Y Y Y hangs on the opposite side from a concentric inner drum of radius r r r , one revolution moves X X X by 2 π R 2\pi R 2 π R and Y Y Y by 2 π r 2\pi r 2 π r in opposite vertical directions, changing their vertical separation by Δ h = 2 π ( R + r ) ⋅ n \Delta h = 2\pi(R + r) \cdot n Δ h = 2 π ( R + r ) ⋅ n .

Summary Reference Table of Mechanical Couplings

Coupling Type Turkish Term Rotation Direction Revolution Formula Key Exam Insight

External Gear Mesh Dıştan Dişli Çark Opposite ( Zıt yönlü ) n 1 T 1 = n 2 T 2 n_1 T_1 = n_2 T_2 n 1 ​ T 1 ​ = n 2 ​ T 2 ​ Smaller gear turns faster; odd cycles jam

Internal Ring Gear İçten Dişli Çark Same ( Aynı yönlü ) n 1 T 1 = n 2 T 2 n_1 T_1 = n_2 T_2 n 1 ​ T 1 ​ = n 2 ​ T 2 ​ Inner pinion and outer ring turn the same way

Open Belt Pulley Düz Bağlı Kasnak Same ( Aynı yönlü ) n 1 r 1 = n 2 r 2 n_1 r_1 = n_2 r_2 n 1 ​ r 1 ​ = n 2 ​ r 2 ​ Preserves rotation sense across shafts

Crossed Belt Pulley Çapraz Bağlı Kasnak Opposite ( Zıt yönlü ) n 1 r 1 = n 2 r 2 n_1 r_1 = n_2 r_2 n 1 ​ r 1 ​ = n 2 ​ r 2 ​ Reverses rotation sense across shafts

Concentric / Co-Axial Eş Merkezli Çark Same ( Aynı yönlü ) n 1 = n 2 n_1 = n_2 n 1 ​ = n 2 ​ Equal turns; bridges different radii to amplify ratios

  • Worked Examples
  • Worked Example 6.3: Compound Gear & Concentric Pulley Train

Problem: Pulley A A A ( r A = 6 cm r_A = 6\text{ cm} r A ​ = 6 cm ) is connected by a crossed belt to Pulley B B B ( r B = 4 cm r_B = 4\text{ cm} r B ​ = 4 cm ). Gear C C C ( r C = 8 cm r_C = 8\text{ cm} r C ​ = 8 cm ) is mounted concentrically on the same axle as Pulley B B B , and meshes externally with Gear D D D ( r D = 3 cm r_D = 3\text{ cm} r D ​ = 3 cm ). If Pulley A A A rotates 2 turns clockwise (CW) , find the number of turns and rotation direction of Gear D D D .

Solution:

Pass 1 — Trace Directions:

Pulley A A A : CW .

A → B A \to B A → B (crossed belt reverses direction): Pulley B B B turns CCW .

B → C B \to C B → C (concentric axle preserves direction): Gear C C C turns CCW .

C → D C \to D C → D (external gear mesh reverses direction): Gear D D D turns CW .

Pass 2 — Compute Revolution Counts:

Across the belt from A A A to B B B : n A ⋅ r A = n B ⋅ r B ⟹ 2 ⋅ 6 = n B ⋅ 4 ⟹ n B = 3 turns n_A \cdot r_A = n_B \cdot r_B \implies 2 \cdot 6 = n_B \cdot 4 \implies n_B = 3\text{ turns} n A ​ ⋅ r A ​ = n B ​ ⋅ r B ​ ⟹ 2 ⋅ 6 = n B ​ ⋅ 4 ⟹ n B ​ = 3 turns

On the shared concentric axle of B B B and C C C : n C = n B = 3 turns n_C = n_B = 3\text{ turns} n C ​ = n B ​ = 3 turns

Across the meshed teeth from C C C to D D D : n C ⋅ r C = n D ⋅ r D ⟹ 3 ⋅ 8 = n D ⋅ 3 ⟹ n D = 8 turns n_C \cdot r_C = n_D \cdot r_D \implies 3 \cdot 8 = n_D \cdot 3 \implies n_D = 8\text{ turns} n C ​ ⋅ r C ​ = n D ​ ⋅ r D ​ ⟹ 3 ⋅ 8 = n D ​ ⋅ 3 ⟹ n D ​ = 8 turns

Conclusion: Gear D D D completes 8 turns clockwise (CW) .

Worked Example 6.4: Sector Pattern After Fractional Revolutions

Problem: Gear X X X has 45 45 45 teeth and meshes externally with Gear Y Y Y , which has 12 12 12 teeth. Gear Y Y Y is divided into 8 8 8 equal numbered sectors ( 1 1 1 through 8 8 8 arranged clockwise), with Sector 1 1 1 currently at the top-right position. If Gear X X X rotates 2 3 \frac{2}{3} 3 2 ​ of a turn counterclockwise (CCW) , how many sector positions and in what direction do the sectors of Gear Y Y Y shift?

Solution:

Find the rotation direction of Gear Y Y Y : Since X X X turns CCW and meshes externally with Y Y Y , Gear Y Y Y turns clockwise (CW) .

Calculate the revolution count n Y n_Y n Y ​ : n X ⋅ T X = n Y ⋅ T Y ⟹ 2 3 ⋅ 45 = n Y ⋅ 12 n_X \cdot T_X = n_Y \cdot T_Y \implies \frac{2}{3} \cdot 45 = n_Y \cdot 12 n X ​ ⋅ T X ​ = n Y ​ ⋅ T Y ​ ⟹ 3 2 ​ ⋅ 45 = n Y ​ ⋅ 12 30 = 12 n Y ⟹ n Y = 30 12 = 5 2 = 2 + 1 2 turns 30 = 12 n_Y \implies n_Y = \frac{30}{12} = \frac{5}{2} = 2 + \frac{1}{2}\text{ turns} 30 = 12 n Y ​ ⟹ n Y ​ = 12 30 ​ = 2 5 ​ = 2 + 2 1 ​ turns

Discard whole turns and convert the fractional part to sectors: Drop the 2 2 2 full turns. The remaining 1 2 \frac{1}{2} 2 1 ​ turn CW shifts every sector by: Δ sectors = 1 2 × 8 = 4 sectors CW \Delta\text{sectors} = \frac{1}{2} \times 8 = 4\text{ sectors CW} Δ sectors = 2 1 ​ × 8 = 4 sectors CW

  • (Equivalently, every shaded sector rotates 180 ∘ 180^\circ 18 0 ∘ to the diametrically opposite position.)
  • Worked Example 6.4B: Rolling Spool and Rack-and-Pinion Displacement ( Kremayer Dişli ve Yuvarlanan Makara )

Problem: A double spool consists of an outer wheel of radius R = 20 cm R = 20\text{ cm} R = 20 cm and a concentric inner drum of radius r = 8 cm r = 8\text{ cm} r = 8 cm . The outer wheel rolls without slipping toward the right ( sağa doğru ) along a horizontal floor for n = 2.5 n = 2.5 n = 2.5 revolutions, while a rope wound over the top of the inner drum is attached to a hanging block M M M over a fixed corner pulley to the left of the spool; the taut horizontal rope leaves the top of the inner drum toward that pulley. How far does the center of the spool move horizontally, and by how much does block M M M move? (Take π = 3 \pi = 3 π = 3 .)

Solution:

Horizontal translation of the rolling center ( x center x_{\text{center}} x center ​ ): As the outer wheel of radius R = 20 cm R = 20\text{ cm} R = 20 cm rolls n = 2.5 n = 2.5 n = 2.5 turns clockwise to the right, its axle advances horizontally by: x center = n ⋅ ( 2 π R ) = 2.5 ⋅ ( 2 ⋅ 3 ⋅ 20 ) = 2.5 ⋅ 120 = 300 cm x_{\text{center}} = n \cdot (2\pi R) = 2.5 \cdot (2 \cdot 3 \cdot 20) = 2.5 \cdot 120 = 300\text{ cm} x center ​ = n ⋅ ( 2 π R ) = 2.5 ⋅ ( 2 ⋅ 3 ⋅ 20 ) = 2.5 ⋅ 120 = 300 cm

Winding action of the concentric inner drum ( x wind x_{\text{wind}} x wind ​ ): Because the inner drum ( r = 8 cm r = 8\text{ cm} r = 8 cm ) is concentric with the outer wheel, it also rotates n = 2.5 n = 2.5 n = 2.5 turns clockwise, winding in: x wind = n ⋅ ( 2 π r ) = 2.5 ⋅ ( 2 ⋅ 3 ⋅ 8 ) = 2.5 ⋅ 48 = 120 cm x_{\text{wind}} = n \cdot (2\pi r) = 2.5 \cdot (2 \cdot 3 \cdot 8) = 2.5 \cdot 48 = 120\text{ cm} x wind ​ = n ⋅ ( 2 π r ) = 2.5 ⋅ ( 2 ⋅ 3 ⋅ 8 ) = 2.5 ⋅ 48 = 120 cm

Total rope displacement for block M M M : Since the center moves 300 cm 300\text{ cm} 300 cm to the right AND the top of the inner drum winds 120 cm 120\text{ cm} 120 cm in the same rightward direction, block M M M is pulled upward by: h M = x center + x wind = 300 + 120 = 420 cm h_M = x_{\text{center}} + x_{\text{wind}} = 300 + 120 = 420\text{ cm} h M ​ = x center ​ + x wind ​ = 300 + 120 = 420 cm

(Note: If the rope had exited from the bottom of the inner drum, the winding would oppose the forward roll, giving h M = 300 − 120 = 180 cm h_M = 300 - 120 = 180\text{ cm} h M ​ = 300 − 120 = 180 cm .)

Common TR-YÖS Gear & Pulley Traps to Avoid

Trap 1 — Using n 1 r 1 = n 2 r 2 n_1 r_1 = n_2 r_2 n 1 ​ r 1 ​ = n 2 ​ r 2 ​ on Concentric Wheels: Concentric wheels are welded together ( n 1 = n 2 n_1 = n_2 n 1 ​ = n 2 ​ ). Never multiply their turns by their radii against each other; only apply n 1 r 1 = n 2 r 2 n_1 r_1 = n_2 r_2 n 1 ​ r 1 ​ = n 2 ​ r 2 ​ where a belt or gear tooth bridges two different axles .

Trap 2 — Wasting Time on Intermediate Idler Gears: In a simple chain G 1 − G 2 − G 3 − G 4 G_1 - G_2 - G_3 - G_4 G 1 ​ − G 2 ​ − G 3 ​ − G 4 ​ with no concentric shafts, ignore the tooth counts of G 2 G_2 G 2 ​ and G 3 G_3 G 3 ​ completely; jump straight to n 1 T 1 = n 4 T 4 n_1 T_1 = n_4 T_4 n 1 ​ T 1 ​ = n 4 ​ T 4 ​ and count odd/even positions for direction.

Trap 3 — Shifting Sectors in the Driving Wheel's Direction: Always determine the driven wheel's own rotation direction first before shifting its colored wedges.

Review the Method

To find the visual sector pattern of a divided wheel after n revolutions, discard the integer part of n and advance each colored sector in the wheel's rotation direction by the fractional part multiplied by the total number of equal sectors.