Study guide
17.1 Time Management and NEC Lookup Speed
Texas Journeyman Electrician License Exam Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 About the Texas Journeyman Electrician Exam 1.2 The Two-Part Exam Format (Knowledge + Calculations) 1.3 Eligibility, Application & Scheduling
2 NEC Structure & Navigation
2.1 Key NEC Definitions (Article 100) 2.2 How the NEC is Organized 2.3 NEC Index and Quick Lookup Strategies 2.4 Reading Electrical Plans, Symbols, and Schedules
3 Electrical Theory & Fundamentals
3.1 Ohm's Law, Power, and Series/Parallel Circuits 3.2 Conductors, Resistance, and Voltage Drop 3.3 Three-Phase Systems and Power Factor
4 Services & Service Equipment
4.1 Service Entrance Conductors and Service Point 4.2 Service Disconnecting Means 4.3 Grounding Electrode Systems for Services 4.4 Service Load Calculations
5 Separately Derived Systems & Feeders
5.1 Separately Derived Systems 5.2 Feeder Sizing, Ampacity, and Tap Rules 5.3 Feeder Load Calculations
6 Branch Circuits & Receptacles
6.1 Branch Circuit Sizing and Conductor Selection 6.2 Receptacle Spacing and Required Outlets 6.3 GFCI and AFCI Requirements 6.4 Lighting Outlets and Switch-Controlled Circuits
7 Overcurrent Protection
7.1 Overcurrent Principles and OCPD Types 7.2 Small-Conductor and Continuous-Load Rules 7.3 Motor Overcurrent and Short-Circuit Protection
8 Wiring Methods, Conductors & Boxes
8.1 Wiring Methods and Raceways 8.2 Conductor Insulations and Ampacity 8.3 Conduit and Raceway Fill 8.4 Boxes and Box Fill 8.5 Cable Trays and Underground Wiring 8.6 Cabinets, Cutout Boxes, and Panelboards
9 Equipment Grounding & Bonding
9.1 Equipment Grounding Conductors 9.2 Bonding & the Effective Ground-Fault Current Path 9.3 Equipment and Box Grounding Connections
10 Equipment, Devices & Transformers
10.1 Luminaires and Lighting (NEC Article 410) 10.2 Switches and Device Wiring (NEC Articles 404 & 400) 10.3 Appliances and Utilization Equipment (NEC Articles 422 & 424) 10.4 Transformers (NEC Article 450) 10.5 Working Space and Equipment Access (NEC 110.26)
11 Motors & Generators
11.1 Motor Branch Circuits & Conductors 11.2 Motor Disconnects, Controllers & Starters 11.3 Generators & Emergency Systems
12 Control Devices & Disconnecting Means
12.1 General Disconnecting Means Principles 12.2 HVAC and Refrigeration Disconnects 12.3 Motor Control Circuits and VFDs
13 Dwelling Load Calculations
13.1 General Lighting and Receptacle Load 13.2 Appliance, Range, and Dryer Load 13.3 Neutral Load and Service Sizing
14 Commercial & Advanced Calculations
14.1 Commercial Lighting and Receptacle Load 14.2 Continuous Loads and Equipment Demand 14.3 Voltage Drop and Conductor Sizing 14.4 Commercial Building Load Capstone
15 Special Occupancies & Conditions
15.1 Hazardous (Classified) Locations — NEC Articles 500–506 15.2 Health Care Facilities — NEC Article 517 15.3 Pools, Spas, and Fountains — NEC Article 680 (Beyond GFCI) 15.4 Other Specific Occupancies — A Survey 15.5 Data Processing Rooms and Communications Systems
16 Renewable Energy Technologies
16.1 Solar PV Systems (Article 690) 16.2 Energy Storage and EV Charging (Articles 706, 625)
17 Exam Strategy & Final Review
17.1 Time Management and NEC Lookup Speed 17.2 Test Day and Final Practice
17.1 Time Management and NEC Lookup Speed
Key Takeaways Explain This Topic AI
The TX Journeyman exam is two independently-scored parts: NEC Knowledge (59 Q / 130 min ≈ 2.2 min/Q) and Calculations (26 Q / 110 min ≈ 4.2 min/Q); 70% on EACH part is required.
Use the NEC Index (back of book) for keyword-to-Article lookups, and the Table of Contents (front) when you already know the Article number.
Every NEC reference resolves through Article → Part → Section → Table — drop straight to the Part rather than reading the whole Article.
Soft-bound 2026 NEC only: publisher tabs and pre-existing highlight are allowed; homemade tabs, writing during the exam, the NEC Handbook, and loose-leaf/spiral/ring-bound editions are prohibited.
Skip any lookup that will exceed 3 minutes — flag it and return in the second pass; never leave an answer blank (no guessing penalty).
Last updated: October 2026
Why Time Management Decides Pass or Fail
The Texas Journeyman Electrician exam is not one 85-question test — it is two separately-scored parts. You can know the 2026 NEC cover to cover and still walk out with a failing result if you spend 10 minutes hunting one section in the Index while 58 other questions sit untouched. This section is about converting code knowledge into a passing score under time pressure.
The Two-Part Time Math
The exam is 85 questions across 240 minutes (4 hours), split into two independently-scored parts. You must score 70% on each part — a strong NEC Knowledge score does not rescue a failed Calculations part.
- Part Questions Minutes Minutes per question
- NEC Knowledge 59 130 130 ÷ 59 ≈ 2.2 min/Q
- Calculations 26 110 110 ÷ 26 ≈ 4.2 min/Q
- Total 85 240 —
The arithmetic is unforgiving. At 2.2 minutes per NEC Knowledge question, a single 6-minute Index hunt costs you roughly three other questions' worth of time. At 4.2 minutes per Calculations question, one multi-step motor load that eats 12 minutes blows the budget for two other problems.
NEC Navigation: Index vs. Table of Contents
The 2026 NEC is your only reference, and speed comes from knowing which entry point to use for each question.
Use the Index (back of book) when you know a keyword but not the Article. A question mentions "swimming pool" — the Index sends you to Article 680. A question says "classified location" — the Index points to Article 500.
Use the Table of Contents (front of book) when you already know the Article number and need the right Part or Section. A motor question flips to Article 430, then to Part II for motor branch-circuit conductors.
Use publisher tabs to jump to the heavy-hit Articles (210, 120, 240, 250, 300, 314, 430, 500, 517, 680, 690). Pre-applied tabs are allowed in the exam room.
Use pre-existing highlight (added before exam day) to mark the tables you will look up most: Table 310.16 (conductor ampacity), Table 250.122 (equipment grounding conductor sizing), Table 430.250 (motor full-load current), and Article 120 (load calculations).
The Lookup Hierarchy
Every NEC reference resolves through the same four-level hierarchy:
Article → Part → Section → Table
Worked example — a question asks for the grounding electrode conductor size for a service with a 2/0 AWG grounded conductor:
- Article 250 — Grounding and Bonding
- Part III — Grounding Electrode System and Grounding Electrode Conductors
- Section 250.66 — Size of Alternating-Current Grounding Electrode Conductor
- Table 250.66 — sized by the largest ungrounded service conductor
Knowing the hierarchy keeps you from reading the whole Article. You drop straight to the Part and Section that hold the answer.
When to Flag and Skip
A disciplined skip is not giving up — it is protecting the rest of the exam.
Flag any question whose lookup will exceed 3 minutes. Move on; return in the second pass.
Mark every calculation-heavy item that needs more than one table lookup or a multi-step formula. Answer the quick code-recall items first.
Never leave an answer unscored. If time is about to run out, bubble your best guess on flagged items before the clock hits zero. There is no penalty for guessing.
Soft-Bound NEC Rules (Open-Book Policy)
The proctor will inspect your NEC. Violations mean the book stays outside the room.
- Allowed Not Allowed
- Soft-bound 2026 NEC Loose-leaf, spiral, or ring-bound editions
- Publisher-applied tabs Homemade tabs, sticky notes, taped labels
- Highlight added before exam day Writing, pen marks, or pencil notes added during the exam
- — NEC Handbook (the commentary edition)
If your NEC has any handwritten notes — even from months ago — scrub them or replace the book before exam day. The proctor's call is final.
- A Worked Time-Budget Plan
- NEC Knowledge (130 min)
- Phase Minutes Action
- First pass 100 Answer code-recall items you know immediately; flag anything requiring a deep lookup
- Second pass 25 Return to flagged items; use the Index, not browsing
- Review buffer 5 Verify bubbled answers; do not second-guess confident wins
- Calculations (110 min)
- Phase Minutes Action
- First pass 85 Solve the calculation items you can complete in one pass; flag the longest
- Second pass 20 Return to flagged multi-step problems
- Review buffer 5 Confirm units, confirm you answered the question asked
The buffer is small on purpose. Most of your safety margin lives in the first-pass discipline of skipping rather than sinking 8 minutes into one Index hunt. If you finish the first pass with 20 flagged items and 25 minutes left, you have 75 seconds per flagged item — enough for a focused Index lookup, not enough for a wandering browse.
Common Time Traps
Browsing instead of Indexing. Flipping through Article 250 looking for the right Section burns 5 minutes; the Index entry "bonding, services" takes you to 250.92 in 15 seconds.
Solving calculations in order. A 12-minute motor load is question 3 of 26; answer it last, not first. Sort the Calculations part by difficulty on your first read-through.
Re-reading the prompt. Read it once, circle the qualifier ("maximum," "minimum," "required," "not permitted"), then look up the rule.
Second-guessing easy wins. The last 5 minutes are for verifying bubbled answers match your flagged list — not for re-solving a question you already answered confidently.