Study guide
1.2 The Two-Part Exam Format (Knowledge + Calculations)
Texas Journeyman Electrician License Exam Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 About the Texas Journeyman Electrician Exam 1.2 The Two-Part Exam Format (Knowledge + Calculations) 1.3 Eligibility, Application & Scheduling
2 NEC Structure & Navigation
2.1 Key NEC Definitions (Article 100) 2.2 How the NEC is Organized 2.3 NEC Index and Quick Lookup Strategies 2.4 Reading Electrical Plans, Symbols, and Schedules
3 Electrical Theory & Fundamentals
3.1 Ohm's Law, Power, and Series/Parallel Circuits 3.2 Conductors, Resistance, and Voltage Drop 3.3 Three-Phase Systems and Power Factor
4 Services & Service Equipment
4.1 Service Entrance Conductors and Service Point 4.2 Service Disconnecting Means 4.3 Grounding Electrode Systems for Services 4.4 Service Load Calculations
5 Separately Derived Systems & Feeders
5.1 Separately Derived Systems 5.2 Feeder Sizing, Ampacity, and Tap Rules 5.3 Feeder Load Calculations
6 Branch Circuits & Receptacles
6.1 Branch Circuit Sizing and Conductor Selection 6.2 Receptacle Spacing and Required Outlets 6.3 GFCI and AFCI Requirements 6.4 Lighting Outlets and Switch-Controlled Circuits
7 Overcurrent Protection
7.1 Overcurrent Principles and OCPD Types 7.2 Small-Conductor and Continuous-Load Rules 7.3 Motor Overcurrent and Short-Circuit Protection
8 Wiring Methods, Conductors & Boxes
8.1 Wiring Methods and Raceways 8.2 Conductor Insulations and Ampacity 8.3 Conduit and Raceway Fill 8.4 Boxes and Box Fill 8.5 Cable Trays and Underground Wiring 8.6 Cabinets, Cutout Boxes, and Panelboards
9 Equipment Grounding & Bonding
9.1 Equipment Grounding Conductors 9.2 Bonding & the Effective Ground-Fault Current Path 9.3 Equipment and Box Grounding Connections
10 Equipment, Devices & Transformers
10.1 Luminaires and Lighting (NEC Article 410) 10.2 Switches and Device Wiring (NEC Articles 404 & 400) 10.3 Appliances and Utilization Equipment (NEC Articles 422 & 424) 10.4 Transformers (NEC Article 450) 10.5 Working Space and Equipment Access (NEC 110.26)
11 Motors & Generators
11.1 Motor Branch Circuits & Conductors 11.2 Motor Disconnects, Controllers & Starters 11.3 Generators & Emergency Systems
12 Control Devices & Disconnecting Means
12.1 General Disconnecting Means Principles 12.2 HVAC and Refrigeration Disconnects 12.3 Motor Control Circuits and VFDs
13 Dwelling Load Calculations
13.1 General Lighting and Receptacle Load 13.2 Appliance, Range, and Dryer Load 13.3 Neutral Load and Service Sizing
14 Commercial & Advanced Calculations
14.1 Commercial Lighting and Receptacle Load 14.2 Continuous Loads and Equipment Demand 14.3 Voltage Drop and Conductor Sizing 14.4 Commercial Building Load Capstone
15 Special Occupancies & Conditions
15.1 Hazardous (Classified) Locations — NEC Articles 500–506 15.2 Health Care Facilities — NEC Article 517 15.3 Pools, Spas, and Fountains — NEC Article 680 (Beyond GFCI) 15.4 Other Specific Occupancies — A Survey 15.5 Data Processing Rooms and Communications Systems
16 Renewable Energy Technologies
16.1 Solar PV Systems (Article 690) 16.2 Energy Storage and EV Charging (Articles 706, 625)
17 Exam Strategy & Final Review
17.1 Time Management and NEC Lookup Speed 17.2 Test Day and Final Practice
1.2 The Two-Part Exam Format (Knowledge + Calculations)
Key Takeaways Explain This Topic AI
Since March 11, 2025 the exam is split into two independently-scored parts: NEC Knowledge (59 Q / 130 min) and Calculations (26 Q / 110 min).
You must score 70% on EACH part — a strong Knowledge score cannot offset a weak Calculations score, and vice versa.
Knowledge allows roughly 2.2 minutes per question and Calculations roughly 4.2, because each calculation item needs multi-step math plus NEC table lookups — so calculation speed must be drilled as a skill separate from code lookup.
Both portions are open-book using the same soft-bound 2026 NEC; the $78 fee covers both in one sitting, and a $78 retake covers one failed portion or both.
Passing thresholds run off scored items only — 56 scored on Knowledge (≈40 correct) and 24 scored on Calculations (≈17 correct).
Last updated: October 2026
The March 11, 2025 Split
Quick Answer: On March 11, 2025 TDLR and PSI split the journeyman exam into two separately-scored parts: a NEC Knowledge part (59 questions, 130 minutes) and a Calculations part (26 questions, 110 minutes). You must score 70% on each part independently . A high score on Knowledge does not save a failing Calculations score. The $78 exam fee covers both parts in one sitting.
Before the split, the journeyman exam was a single 80-question, 240-minute test with one blended 70% passing score. A candidate who was excellent at code lookup but weak at math could still pass by piling up correct Knowledge answers and squeaking through on the few calculation questions. That loophole closed on March 11, 2025. Today the two portions are scored as if they were separate exams: you must clear 70% on each before TDLR issues the license. The compensating mercy is that a failure is contained — TDLR's rule is that if a test taker fails a portion, only the failed portion must be retaken . A passing portion is banked; you do not re-sit it.
Why the Split Was Introduced
TDLR's own pass-rate data showed a pattern: candidates who passed the blended exam often could not perform basic load calculations on the job. Employers and inspectors reported licensed journeymen who could recite NEC 210.8 GFCI rules but could not correctly size a feeder for a 75 kVA transformer or adjust conductor ampacity for continuous load. The split forces candidates to demonstrate independent competency in both code knowledge and calculation ability — the two skills the trade actually requires.
The Two Parts Side by Side
- Attribute NEC Knowledge Calculations
- Question Count 59 26
- Time Allowed 130 minutes 110 minutes
- Minutes per Question ≈ 2.2 min ≈ 4.2 min
- Scored / Non-Scored Items 56 scored + 3 non-scored 24 scored + 2 non-scored
- Passing Score 70% of 56 scored (≈ 40 correct) 70% of 24 scored (≈ 17 correct)
- Primary Skill Tested Locating and applying NEC rules Multi-step math with NEC table lookups
- Open Book Yes — soft-bound 2026 NEC Yes — same soft-bound 2026 NEC
Typical Content Definitions, wiring methods, clearances, grounding rules, special occupancies Conductor sizing, load calculations, motor FLC, voltage drop, box fill, service load
Scored Independently Yes Yes
Work the passing threshold off the scored item count, not the total. The CIB states that the Knowledge portion is "59 Items (including 3 Non-Scored Items)" and the Calculations portion is "26 Items (including 2 Non-Scored Items)" — so 56 and 24 items actually count. Seventy percent of 56 is 39.2, meaning 40 correct clears Knowledge; 70% of 24 is 16.8, meaning 17 correct clears Calculations. You cannot tell which items are the non-scored pretest items, so answer all 85 as if every one counts.
Time-Per-Question Comparison
The time budgets look generous on paper but feel tight in the room.
Knowledge: 130 min ÷ 59 Q ≈ 2.2 minutes per question. Most Knowledge items require finding one NEC Article or Table and reading a specific line. A candidate who knows the code's structure can locate, say, the Table 310.16 ampacity row in 30–45 seconds, leaving time to verify the question's condition (continuous load, ambient correction, etc.). A candidate who flips pages randomly will burn 4–5 minutes per question and run out.
Calculations: 110 min ÷ 26 Q ≈ 4.2 minutes per question. Each calculation item typically requires: (1) reading the scenario, (2) identifying the relevant NEC table (e.g., Table 430.250 for motor full-load current, Table 310.16 for conductor ampacity, Table 250.122 for EGC sizing), (3) performing one or more arithmetic steps, and (4) selecting the answer that matches a code-compliant value (often the next size up per 240.4(B) or the next standard size from 240.6(A)). Four minutes is enough only if you have rehearsed the calculation pattern to automaticity.
Why the Split Changed Study Strategy
The old blended exam rewarded a code-fluent, math-weak candidate. The new split rewards a balanced candidate. If your diagnostic practice shows 85% on Knowledge and 55% on Calculations, you will fail — and you will fail repeatedly until you close the calculation gap. The practical implications:
Treat Calculations as a separate study block. Drill Ohm's Law, single-phase and three-phase power formulas, conductor ampacity correction, continuous load factors (125% per 210.19(A) and 210.20(A)), motor FLC from Table 430.250, and voltage drop every day, not just once a week.
Use the NEC as a calculation tool, not just a lookup tool. You must know which table to open for each calculation type. Memorize the table numbers: 310.16 (conductor ampacity), 430.250 (3-phase motor FLC), 250.122 (EGC sizing), 250.66 (GEC sizing), 240.6(A) (standard OCPD sizes), 120.14 (load calculations).
Build speed, not just accuracy. In practice sessions, time yourself on 10-question calculation sets. If you cannot finish 10 calculation questions in 40 minutes, you are not yet ready for the exam's 4.2-minutes-per-question pace.
Do not neglect Knowledge. It carries more total questions (59 vs 26) and more total time, and it is the part most candidates find easier. A common trap is over-investing in Calculations and letting Knowledge drift. Keep both above 70% in practice before booking the exam.
The Two-Part Structure, Diagrammed
Loading diagram...
The diagram makes the rule explicit: both gates must close green before a license is issued. There is no averaging and no partial credit across portions — but there is a partial retake. Fail Calculations with a passing Knowledge score and you re-sit Calculations alone; the Knowledge result stands. PSI charges the same $78 retake fee whether you re-sit one portion or both, so the candidate who fails both pays the same as the candidate who fails one. Plan your study time so that your practice scores on each portion — not the combined average — are consistently above 70% before you schedule with PSI.
What This Means for the Rest of This Guide
Each subsequent chapter flags which part of the exam its content targets:
[Knowledge] chapters focus on locating and applying NEC rules — definitions, clearances, grounding rules, wiring methods, special occupancies.
[Calculations] chapters focus on quantitative applications — conductor sizing, load calculations, motor circuits, voltage drop, box fill, service and feeder loads.
Many chapters touch both parts; the flag tells you where the bulk of that chapter's exam points live so you can budget practice time accordingly.