Study guide

6.4 Eye and Facial Shapes: Reading the Face Before You Map

Texas Eyelash Extension Specialist Licensing Exam Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: TDLR Laws, Regulations and Professional Standards

1.1 Texas Regulatory Framework & the Barbering and Cosmetology Act 1.2 License Renewal, Continuing Education & Display Rules 1.3 Scope of Practice, Prohibited Acts & Inspections 1.4 The Written Examination: Blueprint, Fees & Test-Day Rules

2 Chapter 2: Infection Control, Sanitation and Safety Protocols

2.1 Principles of Infection Control & Levels of Decontamination 2.2 16 TAC Chapter 83 Sanitation Rules & Approved Disinfectants 2.3 Single-Use Implements, Multi-Use Disinfection & Blood Spill Protocol 2.4 16 TAC §83.115: The Eyelash-Specific Health & Safety Rule

3 Chapter 3: Ocular Anatomy, Physiology and Lash Biology

3.1 External Eye Anatomy, Eyelid Structure & Glands 3.2 Internal Ocular Structures & the Tear Film 3.3 Eyelash Biology, Follicle Anatomy & the Lash Growth Cycle

4 Chapter 4: Eye Diseases, Disorders, Contraindications and Client Screening

4.1 Ocular Infections & Inflammatory Disorders 4.2 Eyelid Abnormalities, Systemic Conditions & Contraindications 4.3 Client Consultation, Health History Screening & Medical Referral 4.4 Skin Diseases and Disorders of the Periocular Area

5 Chapter 5: Adhesive Chemistry, Product Safety and Environmental Control

5.1 Cyanoacrylate Chemistry & Polymerization 5.2 Fumes, Chemical Safety, SDS & Health Hazards 5.3 Environmental Controls, Storage & Workspace Optimization

6 Chapter 6: Extension Application, Lash Mapping, Maintenance and Aftercare

6.1 Extension Types, Weights, Diameters & Curl Profiles 6.2 Workstation Setup, Isolation, Placement & Lash Mapping 6.3 Touch-Up Fills, Safe Removals & Client Aftercare 6.4 Eye and Facial Shapes: Reading the Face Before You Map 6.5 The Practical Examination: Kit, Sections & Scoring

6.4 Eye and Facial Shapes: Reading the Face Before You Map

Key Takeaways Explain This Topic AI

Eye and Facial Shapes is a named sub-topic of the 20% Eye and Eyelash Consultation content area, and 16 TAC §83.202(a)(4)(A) puts eye shapes in the first 80 theory hours of the 320-hour curriculum.

The seven classical face shapes are oval, round, square, oblong or rectangular, triangular or pear, inverted triangle or heart, and diamond, and the oval is the reference proportion the others are read against.

Eye placement is read from two measurements: the space between the eyes compared with one eye width, and the angle of a line drawn from the inner to the outer canthus.

Close-set eyes are widened by weighting length outward, wide-set eyes are balanced by weighting length centrally, and downturned eyes are lifted by peaking at the brow arch and tapering the outer corner.

Hooded, deep-set, and monolid eyes need a flat-base curl such as L or L-plus so the extension clears the lid fold instead of pressing into it.

Last updated: August 2026

Why This Is Its Own Exam Topic

Eye and Facial Shapes is the first sub-topic listed under Eye and Eyelash Consultation , which carries 20.0% of the written exam — 8 of 40 scored items . It is also written into the Texas curriculum rule: 16 TAC §83.202(a)(4)(A) places "eye shapes and eyelash growth" first in the 80 hours of theory and related practice inside the 320-hour eyelash extension specialist course.

The competency being tested is not artistic taste. It is whether you can look at a face, classify what you see in standard vocabulary, and select a design that fits it — the same skill a cosmetologist uses for hairstyle selection, applied to the lash line.

The Seven Face Shapes

Face shape is read from the relative width of the forehead, cheekbones, and jaw , and from the ratio of facial length to width . The oval is the traditional reference proportion; every other shape is described by how it departs from the oval.

Face shape Defining proportions Design direction for lash and brow framing

Oval Length about one and a half times width; forehead slightly wider than the jaw; gently rounded jawline The reference shape. Almost any map suits it; follow the eye shape rather than correcting the face.

Round Width and length nearly equal; full cheeks; soft, rounded jaw Add apparent length. Favour a lifted outer emphasis such as a squirrel or cat map; avoid heavy uniform roundness across the centre.

Square Wide forehead, wide cheekbones, and a strong angular jaw of similar width Soften the angles. Favour rounded, blended transitions and softer curls; avoid harsh geometric outer spikes.

Oblong / rectangular Noticeably longer than wide; forehead, cheekbones, and jaw of similar width Add apparent width. Weight length toward the centre and outer-middle rather than dragging the eye outward.

Triangular / pear Narrow forehead widening to a broad jaw Draw attention upward. Add fullness and lift through the upper lash line and brow arch.

Inverted triangle / heart Wide forehead, narrow chin, often a widow's peak Balance downward. Avoid heavy width at the outer upper corner; a softer, more centred emphasis works better.

Diamond Narrow forehead and narrow chin with prominent wide cheekbones Add apparent width at the forehead and soften the mid-face; a lifted brow-arch peak reads well.

How the exam frames it: you will more often be asked to identify a shape from a proportion description than to prescribe a treatment for it. Learn the proportions cold.

Reading Eye Placement: Two Measurements

Before you classify eye shape, take two readings. They take five seconds each and they drive more design decisions than curl choice does.

1. The one-eye-width rule

Measure the horizontal width of one eye, then compare it with the distance between the inner canthi.

Distance equals one eye width → average-set .

Distance is less than one eye width → close-set . The eyes read as crowded toward the nose.

Distance is greater than one eye width → wide-set . The face reads as broad through the mid-face.

2. The canthal tilt

Draw an imaginary line from the inner canthus to the outer canthus .

Outer canthus higher than inner → upturned . A naturally lifted eye.

Outer canthus level with inner → neutral / almond .

Outer canthus lower than inner → downturned . The outer corner drops, which reads as tired or aged and is the single most common thing clients ask to correct.

The Eye Shapes

Eye shape What you see Primary design response

Almond Balanced oval with a visible crease; iris slightly covered top and bottom; neutral canthal tilt The reference shape. Most maps and curls suit it; choose by client preference.

Round Iris fully visible with white showing above and/or below; eye is as tall as it is long Elongate. Weight length toward the outer third; avoid a doll map, which exaggerates roundness.

Monolid Little or no visible upper lid crease; the lid surface is flat and continuous The lid has no fold to hide the base, so use a flat-base L or L+ curl for visible lift; a C or D curl can disappear against the lid.

Hooded An overhanging fold of skin covers part or all of the mobile lid and may sit on the lashes Flat-base L or L+ , and length chosen so the extension clears the hood rather than pressing into it. A strong D curl can curl back into the fold.

Deep-set The globe sits further back in the orbit; a prominent brow bone casts a shadow Bring the lash line forward with lift — L, L+, or a strong D — and enough length to project past the brow bone.

Protruding / prominent The globe projects forward, appearing to sit proud of the orbital rim Avoid extreme curl and length, which exaggerate projection. A softer B or C curl with moderate length flattens the visual effect.

Upturned Outer canthus sits above the inner Already lifted. A centred or evenly weighted map avoids over-lifting into a harsh look.

Downturned Outer canthus sits below the inner Peak length at the brow arch (outer two-thirds) and taper the last 2–3 mm at the outer corner . A cat map is contraindicated because it drags the corner further down.

Close-set Inner canthal distance less than one eye width Push emphasis outward : longer lengths in the outer third, shorter at the inner corner.

Wide-set Inner canthal distance greater than one eye width Pull emphasis inward : weight length toward the centre, or keep lengths more uniform across the lid.

Loading diagram... Consultation Decision Path: From Face and Eye Reading to Map and Curl

Where Shape Analysis Stops: The Safety Override

Face and eye shape tell you what would look best. Natural lash biology tells you what you are allowed to apply. When those disagree, biology wins, and every Texas exam scenario is built on that hierarchy.

The three limits that override styling

Diameter. The mass of a cylindrical fiber rises with the square of its diameter, so a 0.20 mm extension is roughly four times the load of a 0.10 mm one. A client with fine natural lashes cannot carry a heavy classic extension no matter how flattering the map would be.

Length. The conventional safe ceiling is about 2 to 3 mm beyond the natural lash . Extending further creates leverage at the follicle and causes premature shedding and traction damage.

Health of the natural lash. Sparse, brittle, or regrowing lashes after a period of shedding cannot support a dramatic design. Density and condition set the ceiling before aesthetics is even considered.

Findings that stop the design conversation entirely

Some of what you observe during shape analysis is not a styling variable at all — it is a contraindication :

Trichiasis — cilia misdirected inward toward the globe. Never bond an extension to a misdirected lash; the added length turns it into an abrasive against the cornea.

Distichiasis — an accessory row of lashes emerging from or behind the meibomian orifices along the waterline. Never lash the accessory row.

Entropion — the lid margin rolled inward. Absolute contraindication.

Ectropion — the lid margin everted outward, with exposure and chronic tearing. Contraindicated or heavily modified.

Lagophthalmos — incomplete lid closure. Adhesive vapour enters the gap and produces chemical keratitis. Verify complete closure before any adhesive is dispensed.

Anything meeting 16 TAC §83.102(b) — a contagious condition, or inflamed, infected, broken, raised or swollen skin, or an open wound in the area to be serviced.

Running the Consultation

Seat the client upright with eyes open, makeup removed, in even light. Lid architecture changes completely when someone is reclined; hooding that is invisible lying flat is obvious sitting up.

Take the two measurements — inner canthal distance against one eye width, and canthal tilt.

Classify the face shape from the forehead-cheekbone-jaw proportions.

Assess the natural lashes under magnification : density, diameter, length, direction of growth, and health of the margin.

State the ceiling before you state the design. "Your natural lashes will comfortably carry up to about 11 mm through the middle" is a far easier conversation before the map than after the set.

Draw the map on the under-eye pad so the client can see the plan, and confirm it before the first extension goes on.

Explain what shape analysis cannot change. A downturned eye can be visually lifted by mapping and curl; it cannot be structurally altered. Managing that expectation at consultation prevents the "I don't look like the photo" conversation at checkout.

A useful sentence: "I can lift the outer corner visually by peaking the length at your brow arch and tapering the last few lashes — that's the safest way to get the effect you're describing. Going longer at the very outer corner would drag it down and put more weight on your finest lashes." You have explained the design, the reason, and the safety limit in one breath.