Study guide

4.5 Fire Alarm Plans and Record Drawings (§ 34.619)

Texas Fire Alarm Installer License Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Texas Insurance Code Chapter 6002 Foundations

1.1 Chapter 6002 Purpose, Scope & Statutory Definitions 1.2 State Preemption and the Limits of Local Regulation 1.3 Commissioner and SFMO Authority; Adopted Standards and Editions 1.4 Activities Not Regulated: The § 6002.155 Exemptions 1.5 Required Device Labels, Listings and Consumer Information

2 Chapter 2: Certificates of Registration and Company Operating Rules

2.1 Registration Certificates: Main Office, Branch Office and Single Station 2.2 Insurance Requirements for Registered Firms 2.3 Business Location, Designated Employee and Vehicle Identification (§ 34.610) 2.4 Ownership Changes, Officer Changes and Revised Certificates

3 Chapter 3: Individual Licenses, Qualifying Tests and Renewal

3.1 The Six Texas Fire Alarm Licenses and What Each May Do 3.2 License Applications, Fingerprinting and Criminal History 3.3 The Qualifying Tests: TFM11, TFM12, TFM13, TFM14 and Their References 3.4 NICET, ESA and Professional Engineer Substitutions 3.5 Fees, the Two-Year Renewal Cycle and Late Renewal 3.6 Training Schools, Instructors and the Residential Technician Course

4 Chapter 4: Texas Field Practice — Installation, Service, Monitoring and Certification

4.1 Sales, Installation and Service Rules (§ 34.616) 4.2 Monitoring Requirements for Registered Firms (§ 34.616(c)) 4.3 The Installation Certificate (SF035) and Its Distribution 4.4 The Three-Stage Installation Inspection (§ 34.618) 4.5 Fire Alarm Plans and Record Drawings (§ 34.619)

5 Chapter 5: Texas Labels, Records and Enforcement

5.1 Installation and Service Labels (§§ 34.620–34.621) 5.2 Inspection/Test, Yellow and Red Labels and Impairment Notice 5.3 The Texas Recordkeeping and Retention Map 5.4 Prohibited Practices, Discipline, Enforcement and Penalties

6 Chapter 6: NFPA 72 Fundamentals, Power, Signals and Pathways

6.1 Identifying the Applicable NFPA Standards for TFM12 6.2 NFPA 72 Scope, Organization & Core Life Safety Definitions 6.3 NFPA 72 Documentation and Personnel Qualifications 6.4 Types of Equipment and Circuits: IDC, NAC, SLC and System Architectures 6.5 Signal Priority, Annunciation and Monitoring Integrity 6.6 Primary & Secondary Power Supply Calculations 6.7 Principles of Electricity and Notification Circuit Voltage Drop 6.8 Initiating & Notification Circuit Pathways (Class A, B, N, X) 6.9 Pathway Survivability, Shared Pathways and Circuit Separation

7 Chapter 7: Initiating Devices and Detection

7.1 Smoke, Heat & Flame Detection Principles & Spacing Rules 7.2 Gas Detection, Carbon Monoxide Detection and Special-Application Devices 7.3 Detector Selection and Environmental Limits 7.4 Duct Smoke Detectors, HVAC Controls & Specialized Sensors 7.5 Manual Fire Alarm Boxes, Waterflow Switches & Supervisory Initiating Devices 7.6 Sprinkler, Suppression and Releasing Service Interface

8 Chapter 8: Notification Appliances, Emergency Communications and Control Functions

8.1 Audible Notification Requirements & Sound Level Standards 8.2 Visible Notification Spacing, Synchronization & Candela Ratings 8.3 Emergency Communications Systems & Mass Notification Integration 8.4 Emergency Control Functions: Elevators, HVAC, Doors and Egress 8.5 Protected Premises Systems and the Sequence of Operation

9 Chapter 9: Wiring Methods, Supervising Stations and Inspection, Testing and Maintenance

9.1 NEC Article 760 Wiring Methods, Cable Classes & Circuit Protection 9.2 NEC Article 300 Wiring Methods and Installation Workmanship 9.3 Supervising Station Monitoring Systems & Signal Transmission Methods 9.4 Public Emergency Alarm Reporting Systems and Auxiliary Systems 9.5 Periodic Inspection, Testing & Impairment Procedures 9.6 System Acceptance Testing, Commissioning & Maintenance Records

4.5 Fire Alarm Plans and Record Drawings (§ 34.619)

Key Takeaways Explain This Topic AI

Each fire alarm system or modification must be planned by an APS, an RAS as applicable, or a Texas registered professional engineer (§ 34.619(a)).

Except for plans sealed by a Texas registered engineer or where waived by the local AHJ, at least one set of submitted plans must be dated and signed with an original signature by the licensed planner, certifying that the plans meet applicable codes and standards or were copied from sealed engineering plans with violations noted (§ 34.619(b)).

Plans must contain the planner's license number and the registered firm's name, address, phone number, and certificate of registration number, which may be in the form of the rule's stamp (§ 34.619(b), (d)).

Record drawings showing details including the sequence of operation must be provided to the building owner or representative, and subsequent modifications must be legibly noted on them (§ 34.619(c)).

Fire alarm plans, manuals, and documents shall not be stored inside fire alarm panels (§ 34.619(e)).

Last updated: August 2026

Why This Section Matters

Section 34.619 is where planning authority, documentation, and the owner's rights come together. It also contains one of the very few outright prohibitions in Subchapter F — the ban on storing documents inside the panel — which makes it memorable and highly testable.

1. Who May Plan (§ 34.619(a))

"Each fire alarm system or modification to an existing system must be planned by a person holding a fire alarm planning superintendent license or a residential fire alarm superintendent license, as applicable , or a Texas registered professional engineer ."

Three points:

Modifications count. Adding devices to an existing system requires planning by a qualified planner, exactly like a new system.

"As applicable" limits the RAS to one- and two-family residential scope; § 34.611(a)(4) similarly limits the RAS-SS to single station devices in those dwellings.

  • FAL, AMT and RAL cannot plan — § 34.611(a)(7) states the RAL exclusion in words: "but not planning."
  • 2. Signing and Identifying Submitted Plans (§ 34.619(b))

" Except for plans sealed by a Texas registered engineer or where specifically waived by the local authority having jurisdiction , at least one set of plans submitted for review, rating, permit, or record purposes must be dated and signed with an original signature , unless waived by the local AHJ, by the applicable licensed planner, certifying that the plans meet the applicable codes and standards or were copied from sealed engineering plans with any violations of the applicable codes and standards noted ."

Note the two alternative certifications. A planner who works from an engineer's sealed drawings certifies that the plans were copied from them and notes any code violations found — the planner cannot silently reproduce a defective design.

Required identification on the plans:

  • Item Whose
  • License number The licensed planner
  • Name The registered firm
  • Address The registered firm
  • Phone number The registered firm
  • Certificate of registration number The registered firm

Section 34.619(d) provides a plan review and record drawings stamp that may be used to carry this information.

3. Record Drawings (§ 34.619(c))

" Record drawings showing details, in accordance with applicable codes and standards, including the sequence of operation , must be provided to the building owner or his representative and shall comply with the requirements of subsection (b). Subsequent modifications, additions, or alterations must be legibly noted on the record drawings and provided to the owner or his representative."

Three obligations:

Record drawings go to the owner , not just into the firm's file.

They must include the sequence of operation — the input/output cause-and-effect matrix.

They must carry the same signature and identification required by subsection (b), and must be kept current as the system changes.

  • 4. The Panel Storage Prohibition (§ 34.619(e))
  • "Fire alarm plans, manuals, and documents shall not be stored inside fire alarm panels ."

Flat, unconditional, no exceptions in the rule. The practical rationale is obvious once you have opened a panel packed with rolled drawings: paper interferes with terminations and heat dissipation and becomes fuel inside an energized enclosure. NFPA 72 anticipates a documentation cabinet or a location approved by the AHJ; Texas simply forbids the panel.

5. One- and Two-Family Dwelling Drawings (§ 34.619(f))

Even though § 34.617 excuses one- and two-family residences from the installation certificate, § 34.619(f) imposes a drawing requirement:

  • Element Requirement
  • Type Scale or non-scale drawings

Content Locations of fire detection devices , fire alarm notification devices , and the fire alarm system control panel

Retention Maintained by the installing registered firm for not less than one year after completion of the installation

Identification Registered firm's name , phone number , date the installation was completed , certificate of registration number , and the name and signature of the licensed APS, RAS, or Texas registered professional engineer

  • Format Electronically archived drawings that are reproducible are acceptable
  • Availability Must be made available to the residential property owner and the local AHJ upon request
  • 6. Summary and Worked Patterns
  • Question Answer
  • Who may plan? APS, RAS (as applicable), RAS-SS (single station), Texas registered PE

Whose signature on submitted plans? The licensed planner's original signature, unless sealed by a Texas PE or waived by the local AHJ

  • What identifies the firm? Name, address, phone, ACR number — plus the planner's license number
  • Who gets record drawings? The building owner or representative
  • Where may documents be stored? Anywhere except inside the fire alarm panel
  • Residential drawings retention? Not less than one year by the installing registered firm

Pattern A. An FAL sketches a device layout for a small tenant finish-out and submits it for permit with the firm's stamp.

→ Violation of § 34.619(a). The FAL has no planning authority. An APS, RAS (if residential), or Texas PE must plan and sign.

Pattern B. A planner copies an engineer's sealed drawings and notices the design omits strobes in two restrooms.

→ Under § 34.619(b), the planner may certify that the plans were copied from sealed engineering plans, but must note the violations of applicable codes and standards.

Pattern C. A technician rolls the as-builts and the panel manual and stuffs them behind the batteries.

→ Violation of § 34.619(e). Documents may not be stored inside fire alarm panels.

Pattern D. A firm installs a monitored system in a single-family home and keeps no drawing.

→ Violation of § 34.619(f). Even without an installation certificate, a drawing showing detection devices, notification devices, and the panel — bearing the firm's name, phone, completion date, ACR number, and the planner's name and signature — must be retained for at least one year and made available to the owner and the local AHJ on request.