Study guide
About the Texas ACR Contractor Exam
Texas Air Conditioning and Refrigeration Contractor License Exam Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
About the Texas ACR Contractor Exam Open-Book Strategy and the Approved Reference Library
2 Chapter 1: Texas Licensing Laws & TDLR Regulations
1.1 TDLR Licensing Framework, Class A vs Class B Scope, and Technician Registration 1.2 Insurance, Financial Responsibility, Display of License, and Advertising Rules 1.3 TDLR Enforcement, Violations, Administrative Penalties, and Continuing Education
3 Chapter 2: Thermodynamics & Core HVAC Principles
2.1 Heat Transfer Principles: Conduction, Convection, Radiation, and Sensible vs Latent Heat 2.2 Temperature, Pressure, Enthalpy, and the Pressure-Temperature Relationship 2.3 System Airflow Fundamentals, CFM Calculations, and Total External Static Pressure
4 Chapter 3: Load Calculations & System Sizing (Manual J, S, D)
3.1 ACCA Manual J Load Calculations: Heat Gain, Heat Loss, and Building Envelope Factors 3.2 ACCA Manual S Equipment Selection and Manual D Duct Design Principles 3.3 Texas Climate Design Conditions, Solar Gain, and Infiltration Adjustments
5 Chapter 4: Refrigerants, EPA Section 608 & Low-GWP A2L Transition
4.1 Refrigerant Classifications (CFC, HCFC, HFC, HFO) and EPA Section 608 Rules 4.2 AIM Act Phasedown, Next-Gen Low-GWP Refrigerants (R-454B, R-32), and A2L Safety Rules 4.3 Refrigerant Recovery, Recycling, Reclamation, Leak Repair Thresholds, and Evacuation
6 Chapter 5: Refrigeration Cycle & Core System Components
5.1 The Vapor-Compression Refrigeration Cycle and System Component States 5.2 Compressors: Types (Scroll, Reciprocating, Rotary), Maintenance, and Failure Modes 5.3 Condensers, Evaporators, and Expansion Devices (TXV, EEV, Fixed Orifice) 5.4 Service Valves, Filter-Driers, Sight Glasses, and Solenoid & Check Valves
7 Chapter 6: Air Distribution, Ductwork & Indoor Air Quality
6.1 Duct Layouts, Materials, Insulation, Duct Sealing, and Friction Loss 6.2 Air Balancing, Blower Performance Curves, and Air Distribution Fittings 6.3 Indoor Air Quality (IAQ): Ventilation, Filtration, Humidity Control, and ASHRAE 62.2 6.4 Mechanical Ventilation Rates, Air Equipment, and Refrigeration Machinery Rooms
8 Chapter 7: Heating Systems, Gas Controls & Venting
7.1 Gas-Fired Heating: Natural Gas, LP, Burners, Heat Exchangers, and Gas Piping 7.2 Gas Furnace Venting Categories, Draft Hoods, and Combustion Air Requirements 7.3 Electric Resistance Heating and Heat Pump Operation in Heating & Defrost Modes 7.4 Clothes Dryer Exhaust and Product-Conveying Duct Systems 7.5 Combustion Testing and Analysis: CO, Oxygen, Stack Temperature, Draft, and Efficiency
9 Chapter 8: Electrical Systems, Controls & Troubleshooting
8.1 HVAC Electrical Fundamentals: Voltage, Current, Resistance, and Transformer Sizing 8.2 Electric Motors: PSC, ECM, Capacitor Sizing, Relays, Contactors, and Starters 8.3 Schematics Reading, Control Circuits (24V), Thermostats, and Diagnostic Sequence 8.4 Pressure and Safety Controls: High/Low Pressure, Oil Safety, Freeze Protection, and Head Pressure Control
10 Chapter 9: Mechanical Codes & Texas Local Standards (IMC, IFGC & UMC)
9.1 International Mechanical Code (IMC): Equipment Clearances, Access, and Support 9.2 International Fuel Gas Code (IFGC): Pipe Sizing, Materials, Purging, and Testing 9.3 Condensate Drain Piping, Trap Sizing, Secondary Drain Protection, and Auxiliary Pans 9.4 Uniform Mechanical Code vs. International Mechanical Code: Adoption, Differences, and Locating Code Answers 9.5 Refrigerant Line Sizing, Piping Materials, Brazing, Oil Return, and Pipe Support
11 Chapter 10: Commercial Refrigeration & Process Cooling Systems
10.1 Commercial Refrigeration Systems: Walk-in Freezers, Coolers, and Multi-Compressor Racks 10.2 Defrost Systems: Electric, Hot Gas, Off-Cycle, and Evaporator Pressure Regulators (EPR) 10.3 Hydronic Chilled Water Systems, Boilers, and Process Cooling Fundamentals
12 Chapter 11: Jobsite Safety, OSHA Compliance & Business Practice
11.1 OSHA Safety Standards: Fall Protection, Personal Protective Equipment (PPE), and Ladder Safety 11.2 Lockout/Tagout (LOTO), Electrical Safety, High-Pressure Gas Cylinder Handling 11.3 Contractor Business Operations: Contracts, Lien Laws, Permits, Inspections, and Warranties 11.4 OSHA 29 CFR Part 1904: Recording and Reporting Occupational Injuries and Illnesses
About the Texas ACR Contractor Exam
Key Takeaways Explain This Topic AI
TDLR offers four ACR contractor exams: Environmental Air and Commercial Refrigeration, each in Class A (120 scored items, 230 minutes, $74) and Class B (100 scored items, 170 minutes, $60).
Every Texas ACR examination requires 70% to pass — 84 of 120 scored items on a Class A exam and 70 of 100 on a Class B exam.
The TDLR contractor application costs $115, and every requirement including passing the exam must be completed within one year of the date the application is filed.
Experience is 48 months of supervised ACR work in the past 72 months, or 36 months in the past 48 months plus a TDLR technician certification held for the preceding 12 months.
Class A insurance minimums are $300,000 per occurrence, $600,000 aggregate and $300,000 products and completed operations aggregate; Class B is $100,000 / $200,000 / $100,000, and the certificate is filed after you pass.
Last updated: August 2026
About the Texas ACR Contractor Exam
Quick Answer: There is no single "Texas HVAC contractor exam." The Texas Department of Licensing and Regulation (TDLR) offers four contractor endorsement exams — Environmental Air Class A and Class B, Commercial Refrigeration Class A and Class B — plus a separate Certified Technician exam. PSI delivers all of them, all are open book , and all require 70% to pass. The class and endorsement you claim on your $115 TDLR application decide which exam PSI opens for you; you do not choose at the test center.
The Class and Endorsement You Apply For Is the Exam You Sit
Texas licenses air conditioning and refrigeration (ACR) contractors along two independent axes.
Class sets your capacity ceiling:
Class A — unlimited. Any size cooling or heating equipment.
Class B — restricted to cooling systems of 25 tons or less and heating systems of 1.5 million Btu per hour or less.
Endorsement sets your scope of work, and it is the last field of your license number, which reads TACL / A / 000000 / C :
E — Environmental Air Conditioning. Conditioning air for human comfort: temperature, humidity, ventilation, air movement, indoor air quality.
R — Commercial Refrigeration and Process Cooling or Heating. Systems that hold a product or a process at a set temperature or humidity.
C — Combined. Both of the above.
Two classes × two endorsement exams = the four contractor examinations. A candidate who wants the combined C endorsement does not sit a special "combined" test; they sit both endorsement exams at their class level. That is why this guide teaches both blueprints.
The Certified Technician exam is a different credential — not a contractor license, but the TDLR technician certification that, once held for 12 months, unlocks the shorter experience route described below.
Exam Format at a Glance
Every figure below comes from the PSI/TDLR Air Conditioning and Refrigeration Candidate Information Bulletin . Non-scored pilot items are added on top of the scored count and carry their own extra minutes, so more questions appear on your screen than actually count.
- Exam Scored items Non-scored Total on screen Total time Pass Fee
- Environmental Air – Class A 120 5 (+10 min) 125 240 min 70% $74
- Environmental Air – Class B 100 5 (+10 min) 105 180 min 70% $60
- Commercial Refrigeration – Class A 120 5 (+10 min) 125 240 min 70% $74
- Commercial Refrigeration – Class B 100 5 (+10 min) 105 180 min 70% $60
- Certified Technician 60 4 (+8 min) 64 120 min 70% $60
Seventy percent of 120 is 84 correct on either Class A exam; on a Class B exam it is 70 correct out of 100. Non-scored items are indistinguishable from scored ones, so treat all 125 as live. A computer tutorial of up to 15 minutes runs before the clock starts and does not consume exam time.