Study guide
11.3 Contractor Business Operations: Contracts, Lien Laws, Permits, Inspections, and Warranties
Texas Air Conditioning and Refrigeration Contractor License Exam Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
About the Texas ACR Contractor Exam Open-Book Strategy and the Approved Reference Library
2 Chapter 1: Texas Licensing Laws & TDLR Regulations
1.1 TDLR Licensing Framework, Class A vs Class B Scope, and Technician Registration 1.2 Insurance, Financial Responsibility, Display of License, and Advertising Rules 1.3 TDLR Enforcement, Violations, Administrative Penalties, and Continuing Education
3 Chapter 2: Thermodynamics & Core HVAC Principles
2.1 Heat Transfer Principles: Conduction, Convection, Radiation, and Sensible vs Latent Heat 2.2 Temperature, Pressure, Enthalpy, and the Pressure-Temperature Relationship 2.3 System Airflow Fundamentals, CFM Calculations, and Total External Static Pressure
4 Chapter 3: Load Calculations & System Sizing (Manual J, S, D)
3.1 ACCA Manual J Load Calculations: Heat Gain, Heat Loss, and Building Envelope Factors 3.2 ACCA Manual S Equipment Selection and Manual D Duct Design Principles 3.3 Texas Climate Design Conditions, Solar Gain, and Infiltration Adjustments
5 Chapter 4: Refrigerants, EPA Section 608 & Low-GWP A2L Transition
4.1 Refrigerant Classifications (CFC, HCFC, HFC, HFO) and EPA Section 608 Rules 4.2 AIM Act Phasedown, Next-Gen Low-GWP Refrigerants (R-454B, R-32), and A2L Safety Rules 4.3 Refrigerant Recovery, Recycling, Reclamation, Leak Repair Thresholds, and Evacuation
6 Chapter 5: Refrigeration Cycle & Core System Components
5.1 The Vapor-Compression Refrigeration Cycle and System Component States 5.2 Compressors: Types (Scroll, Reciprocating, Rotary), Maintenance, and Failure Modes 5.3 Condensers, Evaporators, and Expansion Devices (TXV, EEV, Fixed Orifice) 5.4 Service Valves, Filter-Driers, Sight Glasses, and Solenoid & Check Valves
7 Chapter 6: Air Distribution, Ductwork & Indoor Air Quality
6.1 Duct Layouts, Materials, Insulation, Duct Sealing, and Friction Loss 6.2 Air Balancing, Blower Performance Curves, and Air Distribution Fittings 6.3 Indoor Air Quality (IAQ): Ventilation, Filtration, Humidity Control, and ASHRAE 62.2 6.4 Mechanical Ventilation Rates, Air Equipment, and Refrigeration Machinery Rooms
8 Chapter 7: Heating Systems, Gas Controls & Venting
7.1 Gas-Fired Heating: Natural Gas, LP, Burners, Heat Exchangers, and Gas Piping 7.2 Gas Furnace Venting Categories, Draft Hoods, and Combustion Air Requirements 7.3 Electric Resistance Heating and Heat Pump Operation in Heating & Defrost Modes 7.4 Clothes Dryer Exhaust and Product-Conveying Duct Systems 7.5 Combustion Testing and Analysis: CO, Oxygen, Stack Temperature, Draft, and Efficiency
9 Chapter 8: Electrical Systems, Controls & Troubleshooting
8.1 HVAC Electrical Fundamentals: Voltage, Current, Resistance, and Transformer Sizing 8.2 Electric Motors: PSC, ECM, Capacitor Sizing, Relays, Contactors, and Starters 8.3 Schematics Reading, Control Circuits (24V), Thermostats, and Diagnostic Sequence 8.4 Pressure and Safety Controls: High/Low Pressure, Oil Safety, Freeze Protection, and Head Pressure Control
10 Chapter 9: Mechanical Codes & Texas Local Standards (IMC, IFGC & UMC)
9.1 International Mechanical Code (IMC): Equipment Clearances, Access, and Support 9.2 International Fuel Gas Code (IFGC): Pipe Sizing, Materials, Purging, and Testing 9.3 Condensate Drain Piping, Trap Sizing, Secondary Drain Protection, and Auxiliary Pans 9.4 Uniform Mechanical Code vs. International Mechanical Code: Adoption, Differences, and Locating Code Answers 9.5 Refrigerant Line Sizing, Piping Materials, Brazing, Oil Return, and Pipe Support
11 Chapter 10: Commercial Refrigeration & Process Cooling Systems
10.1 Commercial Refrigeration Systems: Walk-in Freezers, Coolers, and Multi-Compressor Racks 10.2 Defrost Systems: Electric, Hot Gas, Off-Cycle, and Evaporator Pressure Regulators (EPR) 10.3 Hydronic Chilled Water Systems, Boilers, and Process Cooling Fundamentals
12 Chapter 11: Jobsite Safety, OSHA Compliance & Business Practice
11.1 OSHA Safety Standards: Fall Protection, Personal Protective Equipment (PPE), and Ladder Safety 11.2 Lockout/Tagout (LOTO), Electrical Safety, High-Pressure Gas Cylinder Handling 11.3 Contractor Business Operations: Contracts, Lien Laws, Permits, Inspections, and Warranties 11.4 OSHA 29 CFR Part 1904: Recording and Reporting Occupational Injuries and Illnesses
11.3 Contractor Business Operations: Contracts, Lien Laws, Permits, Inspections, and Warranties
Key Takeaways Explain This Topic AI
Texas HVAC contracts must contain explicit scopes of work, written change orders, dispute clauses, mandatory TDLR notices, and 3-day rescission notices for residential door-to-door sales.
Texas Mechanics Lien Laws (Property Code Ch. 53) require subcontractors to send Fund Trapping Notices by the 15th of the 3rd month (commercial) or 2nd month (residential) following unpaid work.
Property owners must retain 10% statutory retainage during construction and for 30 days after project completion to secure subcontractor lien claims.
16 TAC Chapter 75 requires contractors to pull municipal mechanical permits prior to starting work and pass rough-in and final inspections for Certificate of Occupancy sign-off.
Utility rebates in Texas require AHRI Certificate matching documentation to prove compliance with DOE 2023 minimum 14.3 SEER2 regional efficiency standards.
Last updated: August 2026
Texas Written Contract Requirements and Mandatory Consumer Disclosures
Sound business practices, clear contractual agreements, and strict adherence to Texas statutory consumer protection laws are as vital to an HVAC contractor's success as mechanical competency. Enforceable contracts mitigate disputes, define expectations, and protect financial cash flow.
Essential Elements of an HVAC Contract
To be legally binding in Texas, an HVAC contract must satisfy basic contract law requirements: mutual assent (offer and acceptance), valid consideration (payment in exchange for mechanical services), legal capacity of parties, and lawful objective. Key contract clauses include:
Detailed Scope of Work: Specific listing of equipment brand names, model numbers, AHRI system match numbers, cooling/heating capacities, SEER2 efficiency ratings, duct modifications, electrical connections, and site cleanup.
Contract Price and Payment Schedule: Explicit breakdown of total cost, initial deposit limits, progress payment milestones tied to verified completion stages, and final retainage terms.
Written Change Orders: Any modification to scope, equipment specifications, contract price, or completion timeline must be executed in writing and signed by both contractor and owner prior to initiating modified work .
Dispute Resolution Provisions: Agreed mechanisms (such as mandatory mediation or binding arbitration under the Texas General Arbitration Act) for resolving project disputes.
Right of Rescission (3-Day Cooling-Off Period): Under Texas Business and Commerce Code Chapter 601 , any contract solicited and executed at a consumer's home (home solicitation sales) must include a written Notice of Cancellation informing the buyer of their statutory right to cancel the contract without penalty before midnight of the third business day after signing.
Mandatory TDLR Disclosure Statement
Under 16 TAC §75.70 , all written quotes, proposals, contracts, and invoices rendered by a licensed ACR contractor must display the mandatory state disclosure notice informing consumers of TDLR's regulatory oversight: +-----------------------------------------------------------------------+
- | MANDATORY TDLR STATUTORY INVOICE NOTICE |
- | |
- | "Regulated by The Texas Department of Licensing and Regulation, |
- | P.O. Box 12157, Austin, Texas 78711, 1-800-803-9202, 512-463-6599, |
- | www.tdlr.texas.gov" |
- +-----------------------------------------------------------------------+
- Residential Construction Contract Disclosure (Texas Property Code Ch. 53)
Contractors entering into contracts for residential construction or remodeling must provide the property owner with a statutory Disclosure Statement for Residential Construction Contracts before signing, outlining mechanics lien risks, subcontractor payment protections, and owner retainage obligations.
Texas Mechanics and Materialmen's Lien Laws (Texas Property Code Chapter 53)
Texas mechanics lien laws provide statutory remedies to secure payment for contractors, subcontractors, laborers, and material suppliers who furnish labor or materials to improve real property.
Constitutional vs. Statutory Liens
Constitutional Lien: Granted under Article XVI, Section 37 of the Texas Constitution automatically to original (prime) contractors who contract directly with the property owner. It requires no statutory preliminary notice, though filing a lien affidavit is recommended to protect against third-party purchasers.
Statutory Lien: Governed by Texas Property Code Chapter 53 . It applies to all derivative claimants (subcontractors, sub-subcontractors, and material suppliers) who do not have a direct contract with the property owner.
Statutory Notice and Filing Deadlines
Derivative claimants must strictly adhere to statutory deadlines to perfect a valid lien against real property. Deadlines differ between commercial and residential projects:
1. Fund Trapping Notice (Pre-Lien Notice)
Subcontractors must send written notice of unpaid claims by certified mail (return receipt requested) to the property owner and prime contractor:
Commercial Projects: Notice must be sent by the 15th day of the 3rd month following each month in which labor or materials were furnished.
Residential Projects: Notice must be sent by the 15th day of the 2nd month following each month in which labor or materials were furnished.
2. Filing Lien Affidavit with County Clerk
The sworn Affidavit Claiming Lien must be filed in the real property records of the county where the property is located:
Commercial Projects: Filed by the 15th day of the 4th month after the indebtedness accrues.
Residential Projects: Filed by the 15th day of the 3rd month after the indebtedness accrues. +-----------------------------------------------------------------------+
- | TEXAS MECHANICS LIEN STATUTORY TIMELINE SUMMARY |
- | |
- | COMMERCIAL PROJECTS: |
- | - Pre-Lien Notice: 15th Day of 3rd Month following work |
- | - Lien Affidavit: 15th Day of 4th Month following accrual |
- | |
- | RESIDENTIAL PROJECTS: |
- | - Pre-Lien Notice: 15th Day of 2nd Month following work |
- | - Lien Affidavit: 15th Day of 3rd Month following accrual |
- +-----------------------------------------------------------------------+
- Statutory 10% Retainage Requirement (Texas Property Code §53.101)
During the progress of work and for 30 days after project completion , property owners are statutorily required to retain 10% of the contract price (or 10% of the value of the work). This retainage fund secures payment for derivative claimants who provide timely notice.
- Lien Parameter Commercial Construction Residential Construction
- Fund Trapping Notice Deadline 15th day of 3rd month after work 15th day of 2nd month after work
- Lien Affidavit Filing Deadline 15th day of 4th month 15th day of 3rd month
Statutory Retainage Requirement 10% retained for 30 days post-completion 10% retained for 30 days post-completion
- Primary Governing Law Texas Property Code §53.056 Texas Property Code §53.056
- Local Municipal Permitting and Inspection Procedures
Under 16 TAC §75.70 , licensed ACR contractors must obtain all required mechanical, building, and electrical permits from local municipal code authorities prior to commencing installation or replacement work .
Municipal Permitting and Inspection Workflow
Permit Application and Plan Review: Submitting equipment specifications, Manual J load calculations, Manual D duct designs, and energy code compliance forms (COMcheck or ResCheck) to the municipal building department.
Permit Issuance: Valid permit issued to the licensed contractor of record.
Rough-In Inspection: Municipal mechanical inspector verifies rough ductwork, fire dampers, refrigerant line sizing, combustion vent clearances, and electrical feed wire size before walls and ceilings are sealed.
Final Mechanical Inspection: Inspector tests safety switches, condensate overflow cutoffs, emergency drain pans, gas line pressure drop tests, and thermostat operation.
Certificate of Occupancy (CO): Final mechanical sign-off is a prerequisite for municipal CO issuance.
Unpermitted Work Penalties: Performing HVAC installations without required municipal permits results in city stop-work orders, double permit penalty fees, municipal municipal court fines, and TDLR administrative enforcement actions ($500–$5,000 fine per violation).
Equipment Warranties, Contractor Labor Warranties, and Disclaimers
Contractors must understand the legal boundary between manufacturer equipment warranties and contractor installation labor warranties:
Manufacturer Parts Warranty: Covers replacement of defective mechanical components (compressors, coils, fan motors, control boards). Standard base coverage is typically 5 years .
Extended 10-Year Manufacturer Warranty: Major HVAC manufacturers (Carrier, Trane, Lennox, Goodman, York) grant extended 10-year limited parts warranties only if the equipment is registered online within 60 to 90 days of installation . Unregistered equipment defaults back to the standard 5-year base warranty.
Contractor Labor Warranty: Separate warranty issued by the installing contractor covering installation workmanship and labor costs to replace failed components (typically 1 to 2 years standard, or extended service agreements up to 10 years).
Warranty Disclaimers and Voiding Actions: Warranties are voided by failure to conduct annual maintenance, unpermitted installations, non-AHRI matched equipment pairings, or unauthorized field modifications.
Deceptive Trade Practices Act (DTPA): Texas Business and Commerce Code Chapter 17 protects consumers against misleading claims, unconscionable business practices, and breach of express or implied warranties, allowing treble damages for intentional violations.
Utility Rebate Programs and Efficiency Standards (SEER2/EER2)
Texas electric utilities (CenterPoint Energy, Oncor Electric, AEP Texas, Austin Energy, CPS Energy) offer substantial energy efficiency rebates ($200 to $1,500+ per system) to encourage high-efficiency HVAC installations.
Mandatory AHRI Matching Requirements
To qualify for utility rebates, contractors must submit an official AHRI Certificate of Product Ratings issued by the Air-Conditioning, Heating, and Refrigeration Institute.
The AHRI Certificate proves that the specific combination of outdoor condensing unit, indoor evaporator coil/air handler, and furnace has been lab-tested and certified as a matched system.
Non-matched component combinations are ineligible for rebates and violate building code efficiency mandates.
DOE 2023 Regional Efficiency Minimums (South/Southwest Region - Texas)
Split-System Central Air Conditioners (< 45,000 BTU/hr): Minimum 14.3 SEER2 (equivalent to 15.0 SEER under legacy testing standards).
Split-System Central Air Conditioners (≥ 45,000 BTU/hr): Minimum 13.8 SEER2 (14.5 SEER).
Heat Pumps (Nationwide): Minimum 14.3 SEER2 and 7.5 HSPF2 .