Study guide

4.1 Technician & Operator Certification, Record-Keeping Requirements

City & Guilds 2079 Level 2 Award in F-Gas & ODS Regulations Category I

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: The Refrigeration Cycle & p-h Diagrams

1.1 Thermodynamics: Sensible/Latent Heat & Pressure-Temperature Relationship 1.2 The Vapour-Compression Cycle & The Four Main Components 1.3 Superheat, Sub-cooling, & COP (Coefficient of Performance)

2 Chapter 2: Refrigerants & Environmental Impact

2.1 Refrigerant Classification 2.2 GWP and ODP Metrics & The Greenhouse Effect 2.3 International Treaties: The Montreal Protocol, Kigali Amendment, & TEWI

3 Chapter 3: Retained F-Gas & ODS Regulations

3.1 The UK Legislative Framework & Retained EU Regulation 517/2014 3.2 CO2-Equivalent Calculation & Leak-Testing Thresholds 3.3 HFC Phase-Down, Service Bans, & Placed-on-the-Market Bans

4 Chapter 4: Certification, Records & Components

4.1 Technician & Operator Certification, Record-Keeping Requirements 4.2 Major System Components 4.3 Auxiliary Components

5 Chapter 5: Tools & Leak Detection Methods

Service Valves, Manifold Gauges, and System Interface Tools Leak Inspection Methods: Direct vs. Indirect & Statutory Frequencies Leak Detector Sensitivity & Fixed Leak Detection Systems

6 Chapter 6: Leak Repair, Pressure Testing & Recovery

6.1 Strength & Leak Pressure Testing using OFN 6.2 Follow-Up Testing & Repair Procedures 6.3 Recovery Operations, Cylinders, Safety, & Venting Prohibition

7 Chapter 7: Refrigerant Management, Safety & Standards

7.1 Recovery vs. Recycling vs. Reclamation vs. Destruction 7.2 Workplace Safety: HASAWA 1974, COSHH, PPE, & Safe Isolation 7.3 Safety Standards & Flammability: BS EN 378 & A2L/A3 Refrigerants

4.1 Technician & Operator Certification, Record-Keeping Requirements

Key Takeaways Explain This Topic AI

Category I certification allows unrestricted work on any size of stationary RAC equipment containing F-Gas.

Records for systems with 5 tonnes of CO2 equivalent or more must be kept for a minimum of 5 years.

System logbooks must detail F-Gas quantities installed, added, and recovered, plus the identities of the certified technicians.

Last updated: July 2026

Overview of F-Gas Certification

Under the retained EU F-Gas Regulation 517/2014, working with fluorinated greenhouse gases requires strict certification. The primary goal is to minimize emissions by ensuring that only competent, certified personnel handle refrigerants and equipment. This section explores the specific scopes of certification categories and the stringent record-keeping requirements imposed on operators and contractors.

Certification Categories

The regulation divides certification into four distinct categories, each with its own specific scope of allowed activities. As a candidate for the City & Guilds 2079 Level 2 Category I award, it is crucial to understand not only your own scope but the limitations of the other categories.

Category Allowed Activities Equipment Size Restrictions

Category I Installation, maintenance, servicing, recovery, and leak checking. No restrictions. May work on stationary RAC equipment of any size containing F-gases.

Category II Installation, maintenance, servicing, recovery. Leak checking permitted provided it does not entail breaking the refrigerant circuit. Restricted to equipment containing less than 3 kg of F-gas (or less than 6 kg if hermetically sealed).

Category III Refrigerant recovery only. Restricted to equipment containing less than 3 kg of F-gas (or less than 6 kg if hermetically sealed).

Category IV Leak checking only. Provided it does not entail breaking the refrigerant circuit. No size restriction for leak checking.

Category I Deep Dive

Category I is the most comprehensive certification. It permits the technician to perform any activity that involves breaking into the refrigerant circuit of stationary refrigeration, air conditioning, and heat pump (RACHP) equipment, regardless of the system's charge size. This includes brazing, pressure testing, evacuation, charging, and recovering refrigerant. Technicians holding this certificate are entrusted with significant environmental responsibility.

Breaking the Circuit

The term "breaking the circuit" is a critical regulatory concept. It refers to any action that opens the sealed refrigerant system to the atmosphere or connects it to external equipment where a potential release could occur. Examples include connecting a manifold gauge set to a Schrader valve, opening a service valve to remove a component, or cutting into the pipework. Category IV technicians, for instance, are strictly prohibited from breaking the circuit; they may only use electronic leak detectors, bubble solutions, or visual inspections on the exterior of the pipework and components.

Operator and Contractor Responsibilities

The F-Gas regulations clearly define the "Operator" as the natural or legal person exercising actual power over the technical functioning of the equipment. Often, this is the building owner or the business utilizing the refrigeration system (such as a supermarket). Operators bear the primary legal burden of compliance, although they typically delegate the physical execution of tasks to certified "Contractors" (service companies).

CO2 Equivalent Thresholds

The regulations rely heavily on the concept of Global Warming Potential (GWP) and CO2 equivalent (CO2e) tonnes to determine regulatory thresholds. The CO2e is calculated by multiplying the mass of the refrigerant (in tonnes) by its GWP.

For example, a system containing 5 kg (0.005 tonnes) of R-404A (GWP 3922) has a CO2 equivalent of 0.005 x 3922 = 19.61 tonnes CO2e .

Mandatory Leak Checking Frequencies

Operators are required to ensure that stationary equipment is checked for leaks at specific intervals, dictated by the system's CO2e charge:

5 to <50 tonnes CO2e: At least every 12 months (or every 24 months if an automatic leak detection system is fitted).

50 to <500 tonnes CO2e: At least every 6 months (or every 12 months if an automatic leak detection system is fitted).

500 tonnes CO2e or more: At least every 3 months (or every 6 months if an automatic leak detection system is fitted). Additionally, an automatic leak detection system is mandatory for systems of this size.

Note: Hermetically sealed systems containing less than 10 tonnes CO2e are exempt from mandatory leak checks, provided they are labeled as hermetically sealed.

Record-Keeping Requirements

Operators of equipment containing F-gases in quantities equivalent to 5 tonnes of CO2 equivalent or more must maintain comprehensive records.

Both the operator and the contractor carrying out the work are legally required to retain these records for a minimum of 5 years . This five-year retention period is a critical audit requirement enforced by environmental agencies. If the Environment Agency requests these logs, they must be produced promptly.

Required Logbook Fields

System logbooks (which can be digital or physical) must contain the following specific information to be deemed compliant:

Quantity and Type of F-Gas Installed: The initial charge amount and specific refrigerant designation (e.g., 20 kg of R-410A).

Quantities Added: Any refrigerant added during maintenance or servicing, including the date and the specific reason for the addition (e.g., topping up after a leak repair on a specific joint).

Quantities Recovered: The amount of F-gas recovered during servicing or final disposal.

Identity of the Company and Technician: The full name, certification details, and company of the personnel carrying out the installation, maintenance, or servicing.

Leak Checks: Dates and results of all mandatory leak checks, including any specific faults found, the location of the leak, and the date the repair was verified.

Measures Taken: Actions taken to recover and dispose of gases if the equipment is being decommissioned.

Contractor Companies must also hold a Company Certificate if they employ personnel to carry out installation, maintenance, or servicing of stationary RACHP equipment containing F-gases. The company must ensure that enough certified personnel are employed to cover the volume of work and that appropriate tools (such as calibrated recovery units, vacuum pumps, and leak detectors) are available and maintained. Failure to maintain accurate logbooks can result in substantial civil sanctions, enforcement notices, or even criminal prosecution. The logbook serves as a life-cycle history of the equipment's environmental impact, tracking every gram of F-gas that enters or exits the system.