Study guide
3.4 Accidents, First Aid, Emergency Procedures & Reporting
City & Guilds 2365 Level 2 Diploma in Electrical Installations Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Qualification Overview
1.1 About the City & Guilds 2365 Level 2 Qualification 1.2 Study Strategy, Exam Technique & Resource Navigation
2 Health, Safety & Environmental Legislation, Risk Assessment & Permits
2.1 Statutory Framework & Health and Safety Law 2.2 Hazardous Substances, Incident Reporting & Welfare 2.3 Work Equipment, Manual Handling & PPE 2.4 Environmental Legislation, Pollution & Site Waste 2.5 Risk Assessments, Method Statements, Permits to Work & Safety Signs
3 Electrical Safety, Safe Isolation, Site Hazards & Emergencies
3.1 Safe Isolation Procedures & GS38 Compliance 3.2 Electrical Hazards & Electric Shock Physiology 3.3 Fire Safety, Site Supplies & Emergency Response 3.4 Accidents, First Aid, Emergency Procedures & Reporting
4 Working at Height & Access Equipment
4.1 Work at Height Regulations & Risk Management 4.2 Ladders, Stepladders & Podiums 4.3 Mobile Access Towers & Scaffolding Systems
5 Mathematical Principles, Units & Basic Mechanics
5.1 Mathematical Foundations & Transposition for Electricians 5.2 SI Units of Measurement in Electrotechnology 5.3 Basic Mechanics: Force, Work, Power & Mechanical Energy 5.4 Mass, Weight, Levers, Gears & Pulleys
6 Electron Theory, Resistance, Resistivity & DC Circuits
6.1 Resistance, Resistivity & Conductor Dimensions 6.2 Temperature Coefficient of Resistance 6.3 Ohm's Law, Power & Direct Current Calculations 6.4 Series, Parallel & Combination DC Circuits 6.5 Electron Theory, Conductors, Insulators & the Effects of Current
7 Magnetism, Electromagnetism & Transformers
7.1 Magnetic Fields, Flux & Solenoid Properties 7.2 Electromagnetic Induction & Motor/Generator Principles 7.3 Transformer Principles, Construction & Calculations
8 Alternating Current, Three-Phase Systems & Electronic Components
8.1 AC Waveform Generation & Key Values 8.2 AC Circuit Theory: Reactance, Impedance & Power Factor 8.3 Three-Phase Generation, Star-Delta & UK Distribution 8.4 Electronic Components in Electrical Systems
9 Industry Regulations, Technical Information & Drawings
9.1 Electrical Regulations, Standards & Part P 9.2 Electrical Drawings, Diagrams & BS EN 60617 Symbols 9.3 Technical Specifications, Schedules & Environmental Influences
10 Wiring Systems, Cables, Containment & Practical Installation
10.1 Thermoplastic, Armoured & Flexible Cables 10.2 Specialised Cables: MICC & Fire-Performance Cables 10.3 Conduit Systems: Steel & PVC 10.4 Trunking, Cable Tray & Cable Supports 10.5 Unit 204 Practical Skills: Tools, Preparation & Installing Wiring Systems
11 Final Circuits, Protective Devices, Alarm & Control Circuits
11.1 Lighting Circuits & Switching Arrangements 11.2 Power Circuits: Ring Final, Radial & Dedicated Circuits 11.3 Consumer Units, Distribution Boards & Protective Devices 11.4 Alarm, Emergency Lighting, Data & Control Circuits
12 Cable Selection & Structural Installation
12.1 Cable Current-Carrying Capacity & Correction Factors 12.2 Voltage Drop Principles & Calculations 12.3 Structural Integrity & Concealed Cable Routing
13 Supply Systems, Earthing, Shock Protection & Micro-Renewables
13.1 UK Electricity Supply Networks & Distribution 13.2 Earthing System Configurations: TN-S, TN-C-S (PME and PNB) & TT 13.3 Protective Conductors, Bonding & Earth Electrodes 13.4 Automatic Disconnection of Supply (ADS) & Maximum Zs 13.5 Micro-Renewable Energy Technologies
14 Electrical Inspection & Dead Testing Sequence
14.1 Inspection Principles & Testing Safety to GS38 14.2 Continuity Testing: Protective Conductors & Ring Circuits 14.3 Insulation Resistance & Polarity Verification
15 Live Testing, Certification & Handover
15.1 Live Testing: Earth Loop Impedance, PFC & RCD Testing 15.2 Certification, Handover & Commissioning
16 Communicating within Building Services Engineering (Unit 210)
16.1 The Construction Team: Site Management, Trades & Site Visitors 16.2 Information Sources: Legislation, Guidance & Workplace Documents 16.3 Customer Information, Company Policies & Limits of Authority 16.4 Communicating Effectively: Methods, Accessibility & Conflict
3.4 Accidents, First Aid, Emergency Procedures & Reporting
Key Takeaways Explain This Topic AI
After an accident: make the area safe, get help, give first aid only within your training, call 999 or 112 for serious injuries, then report and record it.
The emergency services need your location, what has happened, the number and condition of casualties, any hazards and a contact number.
The Health and Safety (First-Aid) Regulations 1981 require adequate first-aid kits, facilities and first-aiders or appointed persons based on a needs assessment, and first-aid kits must not contain medicines.
Misusing first-aid supplies can leave nothing for a real emergency and can be an offence under section 8 of HASAWA, so used items must be replaced.
If a situation is beyond your responsibility, such as suspected asbestos or a gas leak, stop, make safe if you can without risk, and report it to your supervisor.
Last updated: October 2026
3.4 Accidents, First Aid, Emergency Procedures & Reporting
Unit 201 learning outcome 2 (6 of the 25 test questions) covers what to do when things go wrong: accidents that injure people, emergencies such as fire, who to report to, and what to do when a situation is beyond your level of responsibility. Learning outcome 3 adds the first-aid facilities that must be available and why they must not be misused.
What to Do After an Accident
Make the area safe without putting yourself at risk: isolate the electricity, stop machinery and keep other people away.
Get help : shout for help and call the site first-aider.
Give first aid only within your training ; the trained first-aider takes over when they arrive.
Call the emergency services on 999 or 112 for any serious injury.
Report the accident to your supervisor and record it in the accident book.
Preserve the scene for the investigation, and make sure any RIDDOR report is made (Section 2.2).
- Information the emergency services need
- your name and the number you are calling from;
- the exact location: site address and postcode, which entrance to use, and a landmark;
- what has happened (fall, electric shock, burn, collapse) and how many casualties there are;
- each casualty's condition: conscious or not, breathing or not, bleeding;
- any hazards on site, such as live equipment, fire, chemicals or work at height;
who will meet the crew and guide them to the casualty.
Electric shock and electrical burns
Section 3.2 covers the full rescue procedure. In summary: never touch a casualty who is still in contact with the supply; isolate first; call 999 or 112; start CPR (30 compressions to 2 breaths) if they are not breathing normally and use an AED as soon as one arrives. Cool burns under cool running water for at least 20 minutes and cover them loosely with cling film or a sterile dressing. Electrical burns are often much deeper than they look, and a shock can disturb the heart's rhythm, so anyone who has had a significant electric shock should be assessed in hospital even if they seem fine.
Emergency Situations
Emergencies on site include fire, gas leaks, flooding, structural collapse, chemical spills and bomb threats. The Unit 201 range lists the procedures you must know: summoning the emergency services, the information they need, alarm and evacuation procedures, designated escape routes, firefighting procedures, first aid and the RIDDOR reporting procedure.
Alarm and evacuation
Raise the alarm using the nearest call point, by shouting "Fire!", or with the site's agreed alarm.
Leave by the nearest designated escape route. Do not use lifts, and close doors behind you to slow the spread of fire and smoke.
Go straight to the assembly point without stopping to collect belongings.
Report to the person taking the roll call (for example the fire marshal), using the signing-in book so that nobody is missed.
Do not go back in until the fire service or site management says it is safe.
Tackle a fire only if you are trained, the fire is small, you have the right extinguisher (Section 3.3) and your escape route is clear behind you.
Gas leaks
If you smell gas: do not operate any electrical switches (on or off), because a spark could ignite the gas; put out naked flames and do not smoke; open doors and windows; turn off the supply at the emergency control valve if it is safe to do so; get everyone out; and call the National Gas Emergency number, 0800 111 999 .
First-Aid Facilities
The Health and Safety (First-Aid) Regulations 1981 require employers to provide adequate and appropriate first-aid equipment, facilities and people, based on an assessment of their first-aid needs (the number of workers, the hazards and how remote the site is). This normally includes:
a suitably stocked first-aid kit with items such as sterile dressings, plasters, bandages, eye pads, triangular bandages, disposable gloves and cleansing wipes, but no tablets or medicines ;
an appointed person to take charge of first-aid arrangements and, where the risks require it, trained first-aiders (construction sites normally need trained first-aiders);
information telling employees where the kit is and who the first-aiders are;
extra facilities where the risks justify them, such as eyewash stations, burns kits, a first-aid room on large sites, or an AED.
Why first-aid supplies must not be misused
An item taken for a minor use may be missing when someone has a serious injury.
Using equipment wrongly can make an injury worse or spread infection.
Interfering with or misusing anything provided for health and safety is an offence under section 8 of HASAWA .
Used items must be replaced promptly, and the kit checked regularly, so that it is always complete.
Loading diagram... Accident Response Sequence
Reporting: Who Are the Responsible Persons?
The Unit 201 range lists the people to whom health, safety and welfare matters are reported:
Person Their role in reporting
Employer (through your supervisor or manager) Receives reports of accidents, near misses, hazards, defects and welfare problems; investigates and makes RIDDOR reports.
Employees (colleagues) Need to be warned of hazards that affect them.
Customer or client Must be told about hazards in their premises, such as a dangerous installation or suspected asbestos.
Safety officers or advisers Advise on and investigate hazards, unsafe practices and accidents.
HSE inspectors Enforce health and safety law on construction sites and in factories, and receive RIDDOR reports.
Trade union safety representatives Raise employees' health and safety concerns with the employer and can inspect the workplace.
Environmental health officers (local authority) Enforce health and safety in offices, shops and similar premises, and deal with nuisances such as noise.
When a Situation Exceeds Your Responsibility
Examples include suspected asbestos, a smell of gas, structural damage, an unsafe scaffold, a colleague working live against the rules, or an injury beyond your first-aid training. The correct actions are:
Stop work.
Make the situation safe if you can do so without risk: barrier it off, warn others, and isolate if that is within your authority.
Report it immediately to your supervisor or the responsible person.
Do not try to deal with it yourself : do not remove asbestos, repair a gas leak or alter a scaffold.
Record what happened as your company requires.
Important
Knowing the limits of your own authority is itself a safety skill. Section 7 of HASAWA requires you to take reasonable care and to co-operate with your employer, which includes reporting hazards rather than ignoring them or improvising.