Study guide

1.1 About the City & Guilds 2365 Level 2 Qualification

City & Guilds 2365 Level 2 Diploma in Electrical Installations Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Qualification Overview

1.1 About the City & Guilds 2365 Level 2 Qualification 1.2 Study Strategy, Exam Technique & Resource Navigation

2 Health, Safety & Environmental Legislation, Risk Assessment & Permits

2.1 Statutory Framework & Health and Safety Law 2.2 Hazardous Substances, Incident Reporting & Welfare 2.3 Work Equipment, Manual Handling & PPE 2.4 Environmental Legislation, Pollution & Site Waste 2.5 Risk Assessments, Method Statements, Permits to Work & Safety Signs

3 Electrical Safety, Safe Isolation, Site Hazards & Emergencies

3.1 Safe Isolation Procedures & GS38 Compliance 3.2 Electrical Hazards & Electric Shock Physiology 3.3 Fire Safety, Site Supplies & Emergency Response 3.4 Accidents, First Aid, Emergency Procedures & Reporting

4 Working at Height & Access Equipment

4.1 Work at Height Regulations & Risk Management 4.2 Ladders, Stepladders & Podiums 4.3 Mobile Access Towers & Scaffolding Systems

5 Mathematical Principles, Units & Basic Mechanics

5.1 Mathematical Foundations & Transposition for Electricians 5.2 SI Units of Measurement in Electrotechnology 5.3 Basic Mechanics: Force, Work, Power & Mechanical Energy 5.4 Mass, Weight, Levers, Gears & Pulleys

6 Electron Theory, Resistance, Resistivity & DC Circuits

6.1 Resistance, Resistivity & Conductor Dimensions 6.2 Temperature Coefficient of Resistance 6.3 Ohm's Law, Power & Direct Current Calculations 6.4 Series, Parallel & Combination DC Circuits 6.5 Electron Theory, Conductors, Insulators & the Effects of Current

7 Magnetism, Electromagnetism & Transformers

7.1 Magnetic Fields, Flux & Solenoid Properties 7.2 Electromagnetic Induction & Motor/Generator Principles 7.3 Transformer Principles, Construction & Calculations

8 Alternating Current, Three-Phase Systems & Electronic Components

8.1 AC Waveform Generation & Key Values 8.2 AC Circuit Theory: Reactance, Impedance & Power Factor 8.3 Three-Phase Generation, Star-Delta & UK Distribution 8.4 Electronic Components in Electrical Systems

9 Industry Regulations, Technical Information & Drawings

9.1 Electrical Regulations, Standards & Part P 9.2 Electrical Drawings, Diagrams & BS EN 60617 Symbols 9.3 Technical Specifications, Schedules & Environmental Influences

10 Wiring Systems, Cables, Containment & Practical Installation

10.1 Thermoplastic, Armoured & Flexible Cables 10.2 Specialised Cables: MICC & Fire-Performance Cables 10.3 Conduit Systems: Steel & PVC 10.4 Trunking, Cable Tray & Cable Supports 10.5 Unit 204 Practical Skills: Tools, Preparation & Installing Wiring Systems

11 Final Circuits, Protective Devices, Alarm & Control Circuits

11.1 Lighting Circuits & Switching Arrangements 11.2 Power Circuits: Ring Final, Radial & Dedicated Circuits 11.3 Consumer Units, Distribution Boards & Protective Devices 11.4 Alarm, Emergency Lighting, Data & Control Circuits

12 Cable Selection & Structural Installation

12.1 Cable Current-Carrying Capacity & Correction Factors 12.2 Voltage Drop Principles & Calculations 12.3 Structural Integrity & Concealed Cable Routing

13 Supply Systems, Earthing, Shock Protection & Micro-Renewables

13.1 UK Electricity Supply Networks & Distribution 13.2 Earthing System Configurations: TN-S, TN-C-S (PME and PNB) & TT 13.3 Protective Conductors, Bonding & Earth Electrodes 13.4 Automatic Disconnection of Supply (ADS) & Maximum Zs 13.5 Micro-Renewable Energy Technologies

14 Electrical Inspection & Dead Testing Sequence

14.1 Inspection Principles & Testing Safety to GS38 14.2 Continuity Testing: Protective Conductors & Ring Circuits 14.3 Insulation Resistance & Polarity Verification

15 Live Testing, Certification & Handover

15.1 Live Testing: Earth Loop Impedance, PFC & RCD Testing 15.2 Certification, Handover & Commissioning

16 Communicating within Building Services Engineering (Unit 210)

16.1 The Construction Team: Site Management, Trades & Site Visitors 16.2 Information Sources: Legislation, Guidance & Workplace Documents 16.3 Customer Information, Company Policies & Limits of Authority 16.4 Communicating Effectively: Methods, Accessibility & Conflict

1.1 About the City & Guilds 2365 Level 2 Qualification

Key Takeaways Explain This Topic AI

The City & Guilds 2365-02 Level 2 Diploma in Electrical Installations (Buildings and Structures) is Ofqual-accredited (600/5498/0), approved for learners aged 16+, and needs 49 credits from five mandatory units (TQT 490 hours, 454 GLH).

Unit 201 is assessed by a 25-question, 40-minute closed-book online test (pass approximately 60%) plus a practical assignment.

Unit 202 is a 40-question, 90-minute closed-book test with an approximate 50% pass mark, and Unit 203 is a 40-question, 75-minute test in which the IET On-Site Guide is permitted (pass approximately 60%).

Unit 210 is a 20-question, 40-minute closed-book test (pass approximately 60%), and Unit 204 is assessed by an externally set practical assignment.

The April 2026 handbook (v1.12) was updated for BS 7671 Amendment 4, and the diploma alone does not make you a fully qualified electrician.

Last updated: October 2026

About the City & Guilds 2365 Level 2 Qualification

The City & Guilds Level 2 Diploma in Electrical Installations (Buildings and Structures) (2365-02) is a college- and training-centre-based qualification for people who want to work as electricians in the building services engineering sector. It is regulated by Ofqual under accreditation number 600/5498/0 and is approved for learners aged 16 and over . City & Guilds sets no formal entry requirements, but centres must make sure each candidate has the potential and opportunity to achieve it.

The current qualification handbook is Version 1.12 (April 2026) , which City & Guilds updated throughout for BS 7671 Amendment 4 . Treat that handbook as your blueprint: the learning outcomes, assessment criteria and test specifications used in this guide come from it.

Note

The handbook is explicit that the 2365-02 does not make you a fully qualified electrician. On completion you are at roughly improver or electrician's-mate level. Full qualification needs on-site performance evidence (the handbook points to the City & Guilds 2357 Level 3 NVQ Diploma), and the induction declaration in Appendix 2 asks every candidate to sign to say they understand this.

Structure: Five Mandatory Units, 49 Credits

To achieve the diploma you must gain 49 credits from five mandatory units. Total Qualification Time (TQT) is 490 hours , of which 454 are guided learning hours (GLH).

Unit Title Credits GLH How it is assessed

201 Health and safety in building services engineering 3 26 Online multiple-choice test (component 601) and a practical assignment (component 211)

  • 202 Principles of electrical science 10 89 Online multiple-choice test (component 602)
  • 203 Electrical installations technology 12 115 Online multiple-choice test

204 Installation of wiring systems and enclosures 21 196 Practical assignment (externally set, locally marked, externally verified)

210 Understand how to communicate with others within building services engineering 3 28 Online multiple-choice test

Unit 204 carries the most credits and guided hours because it is the hands-on workshop unit. The other four units are knowledge units tested on City & Guilds' online e-volve platform, which your centre books for you.

The Four Online Tests (Handbook Section 4.1)

  • Test Questions Duration Approximate pass mark Permitted materials
  • Unit 201 (601) Health and safety 25 40 min About 60% Closed book; non-programmable calculator
  • Unit 202 (602) Principles of electrical science 40 90 min About 50% Closed book; non-programmable calculator

Unit 203 Electrical installations technology 40 75 min About 60% IET On-Site Guide ; non-programmable calculator

Unit 210 Communication 20 40 min About 60% Closed book; non-programmable calculator

City & Guilds publishes each grade boundary only as an approximate pass mark ("pass is approximately 60%", or approximately 50% for Unit 202). The handbook does not publish merit or distinction bands for these tests, so treat each one as pass/fail and aim comfortably above the boundary. Unit 203 is the only open-book test: Appendix 3 of the handbook lists the IET On-Site Guide as its normative reference.

Where the marks are: questions per learning outcome

The test specifications state how many questions come from each learning outcome (LO). Use them to plan your revision time.

  • Test Learning outcome Questions %
  • 201 LO1 Legislation in the workplace 4 16
  • 201 LO2 Environmental and health and safety situations 6 24
  • 201 LO3 Establishing a safe working environment 7 28
  • 201 LO4 Identifying and dealing with hazards 8 32
  • 202 LO1 Mathematical principles 2 5
  • 202 LO2 Units of measurement 5 13
  • 202 LO3 Mechanics: force, work, energy and power 7 18
  • 202 LO4 Resistance, resistivity, voltage, current and power 15 37
  • 202 LO5 Magnetism and electricity 7 17
  • 202 LO6 Electronic components 4 10
  • 203 LO1 Electrical industry regulations 3 8
  • 203 LO2 Obtaining technical information 5 12
  • 203 LO3 Wiring systems 15 38
  • 203 LO4 Earthing systems 9 22
  • 203 LO5 How electricity is supplied 5 12
  • 203 LO6 Micro-renewable energies 3 8
  • 210 LO1 The construction team 5 25
  • 210 LO2 Information sources 9 45
  • 210 LO3 Communicating with others 6 30

Tip

Two learning outcomes dominate: 202 LO4 (15 of 40 questions on resistance, Ohm's law, series and parallel circuits and power) and 203 LO3 (15 of 40 questions on circuit types, wiring systems, cable selection and protective devices). Master those and you have banked a large share of the two biggest tests.

  • What Each Unit Covers
  • Unit 201: Health and safety in building services engineering

Roles and responsibilities under health and safety and environmental legislation (HASAWA, the Electricity at Work Regulations, the Management Regulations, the Workplace Regulations, COSHH, Work at Height, PPE, Manual Handling, PUWER and the Control of Asbestos Regulations, plus the Environmental Protection Act, Hazardous Waste and WEEE Regulations and others); accident, first-aid and emergency procedures; RIDDOR; risk assessments, method statements and permits to work; PPE; safe use of access equipment, tools and materials; safe isolation ; CLP hazard pictograms; fire extinguisher selection; and asbestos. The practical assignment (211) assesses practical skills such as safe isolation.

Unit 202: Principles of electrical science

Maths for electricians (fractions, percentages, algebra, indices, transposition, triangles, trigonometry and statistics), SI units and measuring instruments, mechanics (mass and weight, levers, gears and pulleys, work, energy, power and efficiency), electron theory, conductors and insulators, resistance and resistivity, series and parallel d.c. circuits, power, voltage drop, the chemical and thermal effects of current, magnetism and electromagnetism, a.c. generation and sine-wave values, and electronic components such as diodes, thyristors and triacs.

Unit 203: Electrical installations technology

Statutory and non-statutory regulations, technical information (specifications, drawing types, symbols and scale), circuit types and wiring systems for different environments, minimum current-carrying capacity ( I b I_b I b ​ , I n I_n I n ​ , I z I_z I z ​ , I t I_t I t ​ and rating factors), protective devices, specialised installation tools, conduit and trunking capacity, earthing systems (TT, TN-S, TN-C-S PME and PNB), automatic disconnection of supply and the earth fault loop path, generation, transmission and distribution, and micro-renewable energy technologies.

Unit 204: Installation of wiring systems and enclosures

The practical unit: hand and power tools and their safety checks; preparing the work area (hazards, PPE and access equipment); installing and terminating wiring systems and enclosures from drawings (thermoplastic, fire-resistant, data and armoured cables; steel and PVC conduit; trunking and tray); using the JIB safe isolation procedure; bonding services to the main earthing terminal; inspecting a dead installation; and dead testing (continuity of protective conductors, ring final circuit continuity, insulation resistance, polarity and functionality), then recording the results.

Unit 210: Understand how to communicate with others within building services engineering

The roles of the site management team, the trades and site visitors; statutory legislation and guidance information; workplace documents (job specifications, drawings, work programmes, delivery notes, time sheets and policies); customer information (quotations, estimates, invoices, statutory cancellation rights and handover information); company policies and limits of authority; and effective communication, including with people with disabilities or language differences and when resolving conflict.

Progression After the Level 2 Diploma

The handbook lists progression into employment (not as a fully qualified electrician) or onto further City & Guilds qualifications, including the Level 3 Diploma in Electrical Installations (Buildings and Structures) , the Level 3 Diploma in Electrotechnology, and Level 3 awards in initial verification and in periodic inspection and testing. Most learners then complete workplace (NVQ) evidence and an industry end test such as the AM2 or AM2S , and hold a current BS 7671 wiring regulations qualification (City & Guilds 2382).

  • Stage Typical step What it adds
  • 1 City & Guilds 2365-02 Level 2 Diploma Core knowledge and workshop skills (improver level)
  • 2 City & Guilds 2365-03 Level 3 Diploma Design, fault-finding, inspection and testing knowledge
  • 3 BS 7671 qualification (City & Guilds 2382) Detailed knowledge of the current Wiring Regulations
  • 4 Workplace NVQ evidence and the AM2 or AM2S Proof of occupational competence on real sites
  • 5 ECS Gold Card (Installation Electrician) Industry recognition as a qualified electrician

Confirm the exact route with your centre or employer, because apprenticeship standards and card schemes change more often than the 2365 handbook does.

Loading diagram... City & Guilds 2365-02 Structure and Typical Progression