Study guide

5.4 Mass, Weight, Levers, Gears & Pulleys

City & Guilds 2365 Level 2 Diploma in Electrical Installations Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Qualification Overview

1.1 About the City & Guilds 2365 Level 2 Qualification 1.2 Study Strategy, Exam Technique & Resource Navigation

2 Health, Safety & Environmental Legislation, Risk Assessment & Permits

2.1 Statutory Framework & Health and Safety Law 2.2 Hazardous Substances, Incident Reporting & Welfare 2.3 Work Equipment, Manual Handling & PPE 2.4 Environmental Legislation, Pollution & Site Waste 2.5 Risk Assessments, Method Statements, Permits to Work & Safety Signs

3 Electrical Safety, Safe Isolation, Site Hazards & Emergencies

3.1 Safe Isolation Procedures & GS38 Compliance 3.2 Electrical Hazards & Electric Shock Physiology 3.3 Fire Safety, Site Supplies & Emergency Response 3.4 Accidents, First Aid, Emergency Procedures & Reporting

4 Working at Height & Access Equipment

4.1 Work at Height Regulations & Risk Management 4.2 Ladders, Stepladders & Podiums 4.3 Mobile Access Towers & Scaffolding Systems

5 Mathematical Principles, Units & Basic Mechanics

5.1 Mathematical Foundations & Transposition for Electricians 5.2 SI Units of Measurement in Electrotechnology 5.3 Basic Mechanics: Force, Work, Power & Mechanical Energy 5.4 Mass, Weight, Levers, Gears & Pulleys

6 Electron Theory, Resistance, Resistivity & DC Circuits

6.1 Resistance, Resistivity & Conductor Dimensions 6.2 Temperature Coefficient of Resistance 6.3 Ohm's Law, Power & Direct Current Calculations 6.4 Series, Parallel & Combination DC Circuits 6.5 Electron Theory, Conductors, Insulators & the Effects of Current

7 Magnetism, Electromagnetism & Transformers

7.1 Magnetic Fields, Flux & Solenoid Properties 7.2 Electromagnetic Induction & Motor/Generator Principles 7.3 Transformer Principles, Construction & Calculations

8 Alternating Current, Three-Phase Systems & Electronic Components

8.1 AC Waveform Generation & Key Values 8.2 AC Circuit Theory: Reactance, Impedance & Power Factor 8.3 Three-Phase Generation, Star-Delta & UK Distribution 8.4 Electronic Components in Electrical Systems

9 Industry Regulations, Technical Information & Drawings

9.1 Electrical Regulations, Standards & Part P 9.2 Electrical Drawings, Diagrams & BS EN 60617 Symbols 9.3 Technical Specifications, Schedules & Environmental Influences

10 Wiring Systems, Cables, Containment & Practical Installation

10.1 Thermoplastic, Armoured & Flexible Cables 10.2 Specialised Cables: MICC & Fire-Performance Cables 10.3 Conduit Systems: Steel & PVC 10.4 Trunking, Cable Tray & Cable Supports 10.5 Unit 204 Practical Skills: Tools, Preparation & Installing Wiring Systems

11 Final Circuits, Protective Devices, Alarm & Control Circuits

11.1 Lighting Circuits & Switching Arrangements 11.2 Power Circuits: Ring Final, Radial & Dedicated Circuits 11.3 Consumer Units, Distribution Boards & Protective Devices 11.4 Alarm, Emergency Lighting, Data & Control Circuits

12 Cable Selection & Structural Installation

12.1 Cable Current-Carrying Capacity & Correction Factors 12.2 Voltage Drop Principles & Calculations 12.3 Structural Integrity & Concealed Cable Routing

13 Supply Systems, Earthing, Shock Protection & Micro-Renewables

13.1 UK Electricity Supply Networks & Distribution 13.2 Earthing System Configurations: TN-S, TN-C-S (PME and PNB) & TT 13.3 Protective Conductors, Bonding & Earth Electrodes 13.4 Automatic Disconnection of Supply (ADS) & Maximum Zs 13.5 Micro-Renewable Energy Technologies

14 Electrical Inspection & Dead Testing Sequence

14.1 Inspection Principles & Testing Safety to GS38 14.2 Continuity Testing: Protective Conductors & Ring Circuits 14.3 Insulation Resistance & Polarity Verification

15 Live Testing, Certification & Handover

15.1 Live Testing: Earth Loop Impedance, PFC & RCD Testing 15.2 Certification, Handover & Commissioning

16 Communicating within Building Services Engineering (Unit 210)

16.1 The Construction Team: Site Management, Trades & Site Visitors 16.2 Information Sources: Legislation, Guidance & Workplace Documents 16.3 Customer Information, Company Policies & Limits of Authority 16.4 Communicating Effectively: Methods, Accessibility & Conflict

5.4 Mass, Weight, Levers, Gears & Pulleys

Key Takeaways Explain This Topic AI

A moment is force × perpendicular distance from the pivot, and a balanced lever has equal clockwise and anticlockwise moments.

Class I levers have the fulcrum between effort and load (crowbar, pliers), class II levers have the load in the middle (wheelbarrow), and class III levers have the effort in the middle (tweezers, forearm).

Mechanical advantage = load ÷ effort, velocity ratio = distance moved by effort ÷ distance moved by load, and efficiency = MA ÷ VR × 100%.

In a gear train, speed falls and torque rises by the gear ratio (driven teeth ÷ driver teeth), and two meshing gears turn in opposite directions.

In a pulley system the velocity ratio equals the number of rope sections supporting the load, and friction makes the actual mechanical advantage smaller.

Last updated: October 2026

5.4 Mass, Weight, Levers, Gears & Pulleys

Unit 202 learning outcome 3 (7 of the 40 test questions) includes mass and weight and "the principles of basic mechanics as they apply to levers, gears and pulleys", including class I, II and III levers. Electricians use these simple machines every day: pliers and crowbars are levers, motors drive loads through gearboxes and belts, and pulley blocks lift cable drums and heavy luminaires.

Mass and Weight

Mass ( m m m ) is the amount of matter in an object, measured in kilograms (kg). It does not change with location.

Weight ( W W W ) is the force of gravity on that mass, measured in newtons (N):

W = m × g ( g = 9.81 m/s 2 on Earth ) W = m \times g \qquad (g = 9.81\ \text{m/s}^2 \text{ on Earth}) W = m × g ( g = 9.81 m/s 2 on Earth )

A 25 kg cable drum has a weight of 25 × 9.81 = 245.25 25 \times 9.81 = 245.25 25 × 9.81 = 245.25 N. On the Moon, where gravity is about one-sixth as strong, its weight would be much smaller but its mass would still be 25 kg.

Moments and the Principle of Moments

The turning effect of a force about a pivot is its moment :

Moment = Force × perpendicular distance from the pivot \text{Moment} = \text{Force} \times \text{perpendicular distance from the pivot} Moment = Force × perpendicular distance from the pivot

with the moment in newton metres (N·m), the force in newtons and the distance in metres.

The principle of moments states that when an object is balanced, the sum of the clockwise moments about the pivot equals the sum of the anticlockwise moments. A 40 N force acting 0.5 m from a pivot (20 N·m) balances a 20 N force acting 1.0 m from the pivot on the other side (20 N·m).

The Three Classes of Lever

Every lever has a fulcrum (the pivot), an effort (the force you apply) and a load (the force you overcome). The class depends on which one is in the middle:

Class What is in the middle Everyday and trade examples Mechanical advantage

Class I (first order) The fulcrum is between the effort and the load Crowbar, pliers and side cutters, scissors, claw hammer pulling a nail, see-saw Can be more or less than 1, depending on where the fulcrum is

Class II (second order) The load is between the fulcrum and the effort Wheelbarrow, bottle opener, nutcracker Always greater than 1 (the effort arm is longer than the load arm)

Class III (third order) The effort is between the fulcrum and the load Tweezers, tongs, fishing rod, the human forearm Always less than 1 (you gain movement and speed, not force) Class I: EFFORT ----------- [FULCRUM] ----- LOAD

  • Class II: [FULCRUM] ----- LOAD ----------- EFFORT
  • Class III: [FULCRUM] ----- EFFORT ----------- LOAD
  • Mechanical advantage, velocity ratio and efficiency

Mechanical advantage (MA) = Load Effort \text{Mechanical advantage (MA)} = \frac{\text{Load}}{\text{Effort}} Mechanical advantage (MA) = Effort Load ​

Velocity ratio (VR) = Distance moved by the effort Distance moved by the load \text{Velocity ratio (VR)} = \frac{\text{Distance moved by the effort}}{\text{Distance moved by the load}} Velocity ratio (VR) = Distance moved by the load Distance moved by the effort ​

Efficiency ( η ) = MA VR × 100 % \text{Efficiency } (\eta) = \frac{\text{MA}}{\text{VR}} \times 100\% Efficiency ( η ) = VR MA ​ × 100%

For an ideal lever (no friction), the velocity ratio equals the effort arm divided by the load arm, and MA = VR.

Worked example 1: a crowbar (class I)

A crowbar 1.5 m long has its fulcrum 0.25 m from the end touching a 600 N load, so the effort arm is 1.5 − 0.25 = 1.25 1.5 - 0.25 = 1.25 1.5 − 0.25 = 1.25 m. Taking moments about the fulcrum:

Effort × 1.25 = 600 × 0.25 ⟹ Effort = 150 1.25 = 120 N \text{Effort} \times 1.25 = 600 \times 0.25 \implies \text{Effort} = \frac{150}{1.25} = 120\ \text{N} Effort × 1.25 = 600 × 0.25 ⟹ Effort = 1.25 150 ​ = 120 N

  • MA = 600 120 = 5 \text{MA} = \frac{600}{120} = 5 MA = 120 600 ​ = 5
  • Worked example 2: a wheelbarrow (class II)

A wheelbarrow carries a 900 N load whose centre is 0.4 m from the wheel axle (the fulcrum), and the handles are 1.2 m from the axle:

Effort = 900 × 0.4 1.2 = 300 N , MA = 900 300 = 3 \text{Effort} = \frac{900 \times 0.4}{1.2} = 300\ \text{N}, \qquad \text{MA} = \frac{900}{300} = 3 Effort = 1.2 900 × 0.4 ​ = 300 N , MA = 300 900 ​ = 3

Gears

Gears transmit rotation between shafts. For two meshing gears:

Gear ratio = Teeth on the driven gear Teeth on the driver gear \text{Gear ratio} = \frac{\text{Teeth on the driven gear}}{\text{Teeth on the driver gear}} Gear ratio = Teeth on the driver gear Teeth on the driven gear ​

N driven = N driver × T driver T driven , τ driven ≈ τ driver × T driven T driver N_{\text{driven}} = N_{\text{driver}} \times \frac{T_{\text{driver}}}{T_{\text{driven}}}, \qquad \tau_{\text{driven}} \approx \tau_{\text{driver}} \times \frac{T_{\text{driven}}}{T_{\text{driver}}} N driven ​ = N driver ​ × T driven ​ T driver ​ ​ , τ driven ​ ≈ τ driver ​ × T driver ​ T driven ​ ​

where N N N is speed in rev/min, T T T is the number of teeth and τ \tau τ is torque (ignoring losses). A gear train that reduces speed increases torque by the same ratio, which is why motors drive slow, heavy loads through reduction gearboxes.

Worked example 3: a reduction gear

A 15-tooth motor pinion running at 1,440 rev/min drives a 45-tooth gear. The gear ratio is 45 ÷ 15 = 3 : 1 45 \div 15 = 3:1 45 ÷ 15 = 3 : 1 , so the output speed is 1,440 ÷ 3 = 480 1{,}440 \div 3 = 480 1 , 440 ÷ 3 = 480 rev/min and the output torque is about three times the motor torque (less frictional losses).

Points to remember

Two meshing gears turn in opposite directions. An idler gear placed between them makes the driven gear turn the same way as the driver without changing the ratio.

Spur gears link parallel shafts, bevel gears turn the drive through 90°, and a worm and wheel gives a large reduction in one stage (a single-start worm driving a 30-tooth wheel gives 30:1) and often stops the load running back.

Pulleys and Belt Drives

  • Arrangement Velocity ratio (ideal MA) What it does
  • Single fixed pulley 1 Changes the direction of the effort (for example, pulling down to lift up)
  • Single movable pulley 2 Halves the effort but the rope must be pulled twice as far
  • Block and tackle Number of rope sections supporting the lower block Large loads lifted with a small effort

In real pulley systems, friction and the weight of the lower block mean the actual mechanical advantage is lower than the velocity ratio, so the efficiency is below 100%.

Worked example 4: a block and tackle

A block and tackle with four rope sections supporting the lower block (VR = 4) lifts an 800 N luminaire with an effort of 250 N:

MA = 800 250 = 3.2 , η = 3.2 4 × 100 % = 80 % \text{MA} = \frac{800}{250} = 3.2, \qquad \eta = \frac{3.2}{4} \times 100\% = 80\% MA = 250 800 ​ = 3.2 , η = 4 3.2 ​ × 100% = 80%

To raise the load 1 m the effort rope must be pulled 4 m. Check by work done: work in = 250 × 4 = 1,000 = 250 \times 4 = 1{,}000 = 250 × 4 = 1 , 000 J and work out = 800 × 1 = 800 = 800 \times 1 = 800 = 800 × 1 = 800 J, so the efficiency is again 80%.

Belt drives

For a belt drive between two pulleys, speed is inversely proportional to diameter:

N 1 × D 1 = N 2 × D 2 N_1 \times D_1 = N_2 \times D_2 N 1 ​ × D 1 ​ = N 2 ​ × D 2 ​

A motor pulley of 100 mm diameter running at 1,450 rev/min drives a 250 mm fan pulley at 1,450 × 100 ÷ 250 = 580 1{,}450 \times 100 \div 250 = 580 1 , 450 × 100 ÷ 250 = 580 rev/min.

Tip

In test questions, decide first what is in the middle of the lever: fulcrum (class I), load (class II) or effort (class III). Then take moments about the fulcrum to find any missing force.