Study guide

Infection Control and Decontamination

NEBDN National Diploma in Dental Nursing Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Professional Standards, Law, and Ethics

NEBDN Diploma Exam Format and Study Roadmap GDC Standards and Professionalism Legal Frameworks, Consent, and Confidentiality Data Protection and Patient Records

2 Chapter 2: Health, Safety, and Decontamination

Infection Control and Decontamination Health and Safety Legislation Clinical Safety and Environmental Hazards

3 Chapter 3: Medical Emergencies and Patient Assessment

Medical Emergencies: Recognition and Drugs Patient Assessment and Medical History Radiography and Imaging Support

4 Chapter 4: Anatomy, Pathology, and Preventive Care

General and Dental Anatomy Oral Disease and Pathology Prevention and Oral Health Promotion

5 Chapter 5: Restorative Dentistry and Dental Materials

Dental Materials and Mixing Techniques Conservative and Restorative Procedures Endodontic Procedures and Materials Prosthodontic and Replacement Procedures

6 Chapter 6: Specialty Care, Surgical Dentistry, and Pain Control

Minor Oral Surgery and Surgical Support Pediatric Dentistry and Child Safeguarding Pain and Anxiety Control

Infection Control and Decontamination

Key Takeaways Explain This Topic AI

HTM 01-05 (Health Technical Memorandum 01-05) sets the essential quality requirements and best practice for decontamination in primary care dental practices in England; Wales and Scotland publish WHTM 01-05 and SHTM 01-05.

Washer-disinfectors are the preferred method of cleaning dental instruments due to their validated and reproducible cycle.

Type B sterilizers have a vacuum stage and are designed for hollow, air-retentive and wrapped (packaged) loads, whereas Type N sterilizers are designed for unwrapped solid instruments.

Effective hand hygiene is crucial in preventing the spread of infection (HTM 01-05) and should follow a recognised six- or eight-step technique such as the WHO method.

Last updated: October 2026

Introduction to Infection Control

Infection control is paramount in the dental environment to prevent the transmission of infectious agents between patients, and between patients and dental staff. This involves standard precautions, often referred to as universal precautions, which treat all patients as potential carriers of infectious diseases. In England, the primary guidance for decontamination in primary care dental practices is the Health Technical Memorandum 01-05 (HTM 01-05) . Northern Ireland uses HTM 01-05 with its own annex of variations, Wales follows WHTM 01-05 and Scotland follows SHTM 01-05, so always follow your practice's policy. It defines two standards: Essential Quality Requirements, which all practices must meet as a minimum, and Best Practice, which is the gold standard all practices should strive to achieve.

The Decontamination Cycle

The decontamination cycle is a continuous process designed to render reusable dental instruments safe for use. A breach at any stage of the cycle compromises the sterility of the instruments. The cycle consists of several distinct stages:

Acquisition: Selecting instruments that are suitable for effective decontamination.

Cleaning: The removal of visible debris and organic matter.

Disinfection: Reducing the number of viable microorganisms to a safe level.

Inspection: Visually checking instruments for cleanliness and structural integrity, often using a magnifying lamp.

Sterilization: The complete destruction of all living microorganisms, including bacterial spores.

Storage: Storing instruments in a way that maintains their sterile state until use.

Use: Utilizing the instruments during a clinical procedure.

Transport and Pre-cleaning

Used instruments should be transported safely from the clinical area to the decontamination room in a rigid, leak-proof, and easily cleanable container, which must be clearly labeled. Instruments should be kept moist until cleaning begins to prevent organic matter (such as blood or saliva) from drying, which makes it significantly harder to remove.

Cleaning Methods

Cleaning is the critical first step before sterilization. If an instrument is not clean, it cannot be sterilized, as organic matter can shield microorganisms from the sterilization process. There are three primary methods of cleaning:

Washer-Disinfectors

According to HTM 01-05, the use of a washer-disinfector (WD) is the preferred method for cleaning dental instruments. A washer-disinfector automates the cleaning and thermal disinfection processes, providing a highly reproducible and validated cycle. A typical cycle includes a flush (below 45°C to prevent protein coagulation), a wash (using appropriate detergents), a rinse, thermal disinfection (typically maintaining 90°C for 1 minute or 80°C for 10 minutes), and finally, drying.

Ultrasonic Cleaning

Ultrasonic baths utilize high-frequency sound waves to create microscopic bubbles in the cleaning solution. When these bubbles implode (a process known as cavitation), they dislodge debris from the instruments. While effective, especially for complex instruments like burs and endodontic files, ultrasonic cleaning requires manual intervention to load and unload, and does not include a disinfection phase. Instruments must be thoroughly rinsed after ultrasonic cleaning. Regular performance testing, such as the foil test, is required to ensure the ultrasonic bath is functioning correctly.

Manual Cleaning

Manual cleaning is the least preferred method due to its variability, the difficulty in standardizing the process, and the increased risk of sharps injuries to staff. It should primarily be used as a backup when automated methods are unavailable, or for instruments incompatible with automated cleaning. If performed, it must follow a strict protocol: using a dedicated sink, long-handled brushes, appropriate detergent (not household washing-up liquid), and keeping instruments submerged during scrubbing to prevent the creation of aerosols.

Sterilization and Autoclaves

Sterilization is achieved using autoclaves, which utilize saturated steam under pressure to destroy microorganisms. Autoclaves operate at specific temperature and pressure parameters; HTM 01-05 gives steam sterilization as 134–138°C for a minimum of three minutes. There are three main types of autoclaves used in dentistry:

Type N Autoclaves

Type N (Non-vacuum) autoclaves rely on passive air displacement. Steam enters the chamber and physically pushes the air out. HTM 01-05 describes them as designed for non-wrapped solid instruments, and states that a Type N sterilizer is not appropriate for wrapped instruments, because trapped air can stop steam reaching every surface. For dental handpieces, HTM 01-05 asks practices to make an informed choice of sterilizer (Type B, S or N), taking advice from the handpiece manufacturer.

Type B Autoclaves

Type B (Vacuum) autoclaves use a vacuum pump to actively remove air from the chamber before steam is introduced. This ensures steam penetration into every part of the load. HTM 01-05 describes them as designed for hollow, air-retentive and packaged loads; each cycle should be validated and used according to the sterilizer and instrument manufacturers' instructions. Instruments should be wrapped before sterilization only in a vacuum sterilizer validated for that load. Under HTM 01-05 (England), wrapped instruments may be stored for up to one year. Storage rules differ elsewhere: WHTM 01-05 (Wales) recommends reprocessing wrapped instruments stored for more than one month, and SHTM 01-05 (Scotland) sets no maximum storage time.

Type S Autoclaves

Type S autoclaves are specialized sterilizers designed by the manufacturer for specific loads. Their capabilities fall between Type N and Type B. They may use single or multi-stage vacuums but are only validated for the specific types of instruments and packaging specified by the manufacturer.

Hand Hygiene

Effective hand hygiene is crucial in preventing the spread of infection (HTM 01-05), and the National Infection Prevention and Control Manual for England calls it one of the most important ways to reduce the transmission of infection. Hand hygiene must be performed:

Before and after every patient contact.

Before putting on and after removing Personal Protective Equipment (PPE).

After exposure to blood or bodily fluids.

When hands are visibly soiled.

The World Health Organization (WHO) handwashing technique should be followed. This involves a systematic process of rubbing all parts of the hands, including the palms, backs of hands, fingers, interlocked fingers, thumbs, and wrists. When hands are visibly clean, an alcohol-based hand rub can be used. However, if hands are visibly soiled, they must be washed with liquid soap and water. Proper drying with disposable paper towels is crucial, as damp hands can harbor and transfer bacteria more readily than dry hands. Furthermore, maintaining short, clean nails (without polish or extensions) and removing all hand and wrist jewelry (except for a plain wedding band) is essential for effective hand hygiene.