Study guide

25.4 Gingival Retraction, Provisionals and Temporary Cements

Overseas Registration Examination ORE

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: ORE Part 1 — Exam Blueprint, Logistics and Strategy

1.1 Structure and Format of ORE Part 1 1.2 The Official Blueprint and Preparing for Practice 1.3 Eligibility, Fees, Attempts and Time Limits

2 Chapter 2: Anatomy of the Head and Neck

2.1 The Trigeminal Nerve and Dental Innervation 2.2 The Facial Nerve and Parotid Region 2.3 The Temporomandibular Joint and Muscles of Mastication 2.4 The Infratemporal Fossa and Spread of Odontogenic Infection

3 Chapter 3: Dental Anatomy, Morphology and Occlusion

3.1 Permanent and Primary Tooth Morphology 3.2 Functional Occlusion: Centric Relation, Guidance and Interferences 3.3 Classifying Occlusion: Angle and BSI Incisor Relationships

4 Chapter 4: Genetics, Embryology and Odontogenesis

4.1 Stages of Odontogenesis and Molecular Signalling 4.2 Amelogenesis and Enamel Microstructure 4.3 Dentinogenesis and the Pulp-Dentine Complex 4.4 Cementum, the Periodontal Ligament and Oral Mucosa 4.5 Genetic and Developmental Dental Anomalies

5 Chapter 5: Oral Biology and Salivary Physiology

5.1 Salivary Gland Anatomy, Microarchitecture and Innervation 5.2 Salivary Secretion, Flow Rates and Autonomic Control 5.3 Salivary Buffering Systems and Protective Macromolecules 5.4 Physiology of Mastication and Deglutition 5.5 Taste, Lingual Papillae and Gustatory Pathways 5.6 Xerostomia, Sjogren's Syndrome and Salivary Diagnostics

6 Chapter 6: Physiology of the Major Body Systems

6.1 Cardiovascular and Respiratory Physiology 6.2 Renal, Endocrine and Gastrointestinal Physiology 6.3 Haematology and Haemostasis 6.4 Neurophysiology, Pain and the Autonomic Nervous System

7 Chapter 7: Bone Biology, Calcium Homeostasis and Healing

7.1 Microstructure and Architecture of Alveolar Bone 7.2 Bone Remodelling and the RANK/RANKL/OPG Axis 7.3 Endocrine Control of Calcium and Phosphate 7.4 Extraction Socket Healing and Ridge Resorption 7.5 Impaired Healing: MRONJ, Osteoradionecrosis and Systemic Risk

8 Chapter 8: Oral Microbiology and Biofilm Ecology

8.1 The Oral Microbiome and Biofilm Development 8.2 Cariogenic Microbiology: Mutans Streptococci and Lactobacilli 8.3 Ecological Hypotheses of Dental Caries 8.4 Biofilm Tolerance and the Case for Mechanical Plaque Control

9 Chapter 9: Immunology Relevant to Oral Disease

9.1 Innate Mucosal Immunity and Gingival Crevicular Fluid 9.2 Cellular Immunity in the Periodontium 9.3 Microbial Pathogenesis: Complexes and Keystone Pathogens 9.4 Host-Mediated Tissue Destruction 9.5 Hypersensitivity Reactions in Dental Practice 9.6 Autoimmune Mucocutaneous Bullous Disease 9.7 Immunodeficiency and Oral HIV Manifestations

10 Chapter 10: General Pathology and Neoplasia

10.1 Cellular Adaptation and Mechanisms of Cell Death 10.2 Inflammation, Wound Healing and Repair 10.3 Principles of Neoplasia and Carcinogenesis 10.4 TNM Staging of Oral Cavity Carcinoma

11 Chapter 11: Statistics and Research Methods

11.1 Study Designs and the Hierarchy of Evidence 11.2 Descriptive and Inferential Statistics 11.3 Diagnostic Test Performance 11.4 Critical Appraisal, Bias and Research Governance

12 Chapter 12: Human Disease: Cardiovascular and Respiratory

12.1 Infective Endocarditis and NICE CG64 12.2 Hypertension and Blood Pressure Thresholds for Dental Care 12.3 Angina, Myocardial Infarction and Antiplatelet Therapy 12.4 Asthma, COPD and Respiratory Emergencies

13 Chapter 13: Human Disease: Endocrine, Haematological and Renal

13.1 Diabetes Mellitus and the Periodontal Axis 13.2 Congenital Bleeding and Clotting Disorders 13.3 Anticoagulants and Antiplatelets: The SDCEP Protocol 13.4 Chronic Kidney Disease and Haemodialysis

14 Chapter 14: Human Disease: Gastrointestinal, Hepatic and Neurological

14.1 Gastrointestinal Disease and Intrinsic Dental Erosion 14.2 Liver Disease, Coagulopathy and Viral Hepatitis 14.3 Epilepsy, Stroke and Transient Ischaemic Attack 14.4 Trigeminal Neuralgia, Bell's Palsy and Giant Cell Arteritis

15 Chapter 15: Oral Aspects of Human Disease

15.1 Oral Manifestations of Systemic Disease 15.2 Orofacial Pain and Temporomandibular Disorders 15.3 Dry Mouth, Altered Taste and Halitosis

16 Chapter 16: Infection Prevention and Control

16.1 The Decontamination Cycle, Sterilization and Waterlines 16.2 Routes of Transmission and Blood-Borne Viruses

17 Chapter 17: Dental Materials

17.1 Dental Amalgam: Metallurgy and UK Regulation 17.2 Resin Composites: Chemistry and Placement 17.3 Dental Adhesive Systems 17.4 Acid Etching, the Hybrid Layer and MMP Degradation 17.5 Glass Ionomer Cements, RMGICs and Compomers 17.6 Impression Materials and Digital Scanning 17.7 Luting Cements and Adhesive Conditioning Protocols 17.8 Dental Ceramics and Cast Alloys 17.9 Gypsum Products, Waxes and Denture Base Polymers

18 Chapter 18: Behavioural Sciences Relevant to Oral Health Care

18.1 Health Behaviour Models and Behaviour Change 18.2 Dental Anxiety and Phobia 18.3 Psychosocial and Sociological Determinants of Oral Health

19 Chapter 19: Patient Assessment and Diagnosis

19.1 History Taking and Clinical Examination 19.2 Special Investigations and Reaching a Diagnosis

20 Chapter 20: Treatment Planning and Risk-Based Care

20.1 Treatment Planning and Sequencing 20.2 Risk Assessment, Recall Intervals and Preventive Planning

21 Chapter 21: Cariology and Caries Risk Assessment

21.1 Caries Pathogenesis and the Stephan Curve 21.2 Histopathology of Enamel and Dentinal Caries 21.3 Caries Diagnosis, ICDAS and Risk Assessment

22 Chapter 22: Operative Dentistry and Minimal Intervention

22.1 Minimal Intervention and Selective Caries Removal 22.2 Pulp Vitality Assessment and Biological Pulp Capping 22.3 Cavity Design, the C-Factor and Margin Geometry

23 Chapter 23: Endodontics

23.1 Pulp Histology and the Low-Compliance Environment 23.2 Pulpal Neurophysiology and Dentine Hypersensitivity 23.3 Pulpal and Periapical Diagnostic Terminology 23.4 Endodontic Diagnostic Testing 23.5 Access Cavity Design and Canal Configurations 23.6 Working Length Determination and Canal Preparation 23.7 Chemical Disinfection and Irrigant Activation 23.8 Medicaments, Obturation Materials and Techniques 23.9 Restoring Endodontically Treated Teeth 23.10 Endodontic Emergencies, Cracked Teeth and Root Fracture

24 Chapter 24: Periodontology

24.1 The 2018 Classification and Periodontal Health 24.2 Plaque-Induced and Non-Plaque-Induced Gingival Disease 24.3 Staging and Grading Periodontitis 24.4 Peri-Implant Disease and Systemic Risk Factors 24.5 The Basic Periodontal Examination 24.6 Simplified BPE in Children and Full Periodontal Charting 24.7 Furcation Involvement, Mobility and Occlusal Trauma 24.8 The BSP Stepwise Treatment Framework 24.9 Periodontal Instrumentation and Healing 24.10 Re-Evaluation, Endpoints and Periodontal Surgery 24.11 Crown Lengthening, Supracrestal Attachment and Supportive Care

25 Chapter 25: Fixed Prosthodontics

25.1 Biomechanical Principles of Tooth Preparation 25.2 Margin Design and the Supracrestal Attachment 25.3 Bridge Design and Resin-Bonded Bridges 25.4 Gingival Retraction, Provisionals and Temporary Cements

26 Chapter 26: Removable Prosthodontics

26.1 Removable Partial Dentures: Classification, Design and Surveying 26.2 Complete Dentures: Principles, Impressions and Jaw Registration

27 Chapter 27: Paediatric Dentistry

27.1 Primary Tooth Anatomy and Caries Management Strategies 27.2 Preformed Metal Crowns and the Hall Technique 27.3 Pulp Therapy in Primary Teeth 27.4 Extractions in the Primary Dentition 27.5 Non-Pharmacological Behaviour Management 27.6 Inhalation Sedation in Paediatric Dentistry 27.7 The Developing Dentition and Space Management 27.8 Serial Extraction and Non-Nutritive Sucking Habits

28 Chapter 28: Dental Traumatology

28.1 Trauma Assessment and Fractures of Permanent Teeth 28.2 Luxation Injuries, Avulsion and Replantation 28.3 Primary Tooth Trauma and Splinting Specifications

29 Chapter 29: Orthodontics

29.1 Extraoral Orthodontic Assessment 29.2 Intraoral Occlusal Assessment 29.3 Skeletal Pattern and Cephalometric Analysis 29.4 IOTN and NHS Treatment Eligibility 29.5 Upper Removable Appliances 29.6 Functional and Fixed Appliances 29.7 Biology of Orthodontic Tooth Movement 29.8 Orthodontic Risks and Retention

30 Chapter 30: Oral Surgery

30.1 Exodontia Biomechanics and Instrument Selection 30.2 Surgical Flap Design, Bone Removal and Suturing 30.3 Third Molar Surgery and NICE Guidance 30.4 Dry Socket and Oroantral Communication 30.5 Odontogenic Infection and Fascial Space Spread

31 Chapter 31: Oral Medicine

31.1 Recurrent Aphthous Stomatitis 31.2 Oral Candidiasis 31.3 Viral Oral Infections 31.4 Reactive Soft Tissue Lesions and the Epulides 31.5 Oral Potentially Malignant Disorders 31.6 Oral Squamous Cell Carcinoma, Urgent Referral and Biopsy

32 Chapter 32: Oral Pathology

32.1 Odontogenic and Non-Odontogenic Cysts 32.2 Odontogenic Tumours 32.3 Obstructive and Reactive Salivary Gland Disease 32.4 Salivary Gland Neoplasms

33 Chapter 33: Therapeutics and Prescribing

33.1 Local Anaesthetic Chemistry and Mechanism of Action 33.2 UK Local Anaesthetic Formulations 33.3 Vasoconstrictors, Maximum Doses and Systemic Toxicity 33.4 Analgesics for Acute Dental Pain 33.5 Antimicrobial Stewardship and First-Line Regimens 33.6 Antifungal and Antiviral Therapeutics

34 Chapter 34: Medical Emergencies in Dental Practice

34.1 The ABCDE Approach and the Emergency Drug Kit 34.2 Anaphylaxis and Acute Coronary Syndrome 34.3 Hypoglycaemia, Acute Asthma and Seizures 34.4 Syncope, Adrenal Crisis, Choking and Resuscitation

35 Chapter 35: Dental Radiology and Radiation Protection

35.1 Radiation Physics, Filtration and Collimation 35.2 Intraoral, Bitewing and Occlusal Projections 35.3 Dental Panoramic Tomography: Principles, Positioning and Errors 35.4 Lateral Cephalometry and Cone Beam CT 35.5 Systematic Reporting and Radiographic Caries Diagnosis 35.6 Radiology of Periodontal Bone Loss and Jaw Lesions 35.7 Radiographic Quality Assurance 35.8 IRR17 and IR(ME)R 2017

36 Chapter 36: Special Care Dentistry and Conscious Sedation

36.1 Special Care Dentistry, Risk Stratification and Sedation Principles 36.2 Inhalation Sedation with Nitrous Oxide 36.3 Intravenous Sedation with Midazolam 36.4 Oral Sedation and General Anaesthesia Referral

37 Chapter 37: Dental Public Health

37.1 Delivering Better Oral Health and the Fluoride Toolkit 37.2 Oral Health Epidemiology and Indices 37.3 Inequalities, Water Fluoridation and Population Prevention 37.4 NHS Dental Services, Access and Commissioning

38 Chapter 38: Communication and Interpersonal Skills

38.1 Patient Communication and Shared Decision-Making 38.2 Breaking Bad News, Complaints and the Duty of Candour 38.3 Referrals, Records and Communication with the Team

39 Chapter 39: Consent and Capacity

39.1 Valid Consent and the Montgomery Standard 39.2 The Mental Capacity Act 2005 39.3 Best Interests Decisions and Lasting Power of Attorney 39.4 Consent in Children and Young People 39.5 Safeguarding Children and Vulnerable Adults 39.6 Confidentiality, Data Protection and Lawful Disclosure

40 Chapter 40: Clinical Professionalism and the GDC

40.1 The General Dental Council and Standards Principles 1 to 4 40.2 GDC Standards: Principles 5 to 9 40.3 The GDC Fitness to Practise Process 40.4 Clinical Governance and the Audit Cycle

41 Chapter 41: Health and Safety Law in Dental Practice

41.1 Health and Safety Legislation, COSHH, RIDDOR and Sharps

42 Chapter 42: Self-Management and Professional Development

42.1 Enhanced CPD, Lifelong Learning and Reflective Practice 42.2 Managing Time, Stress and Clinical Wellbeing 42.3 Leadership, Delegation and Practice Management

25.4 Gingival Retraction, Provisionals and Temporary Cements

Key Takeaways Explain This Topic AI

Accurate margin reproduction requires displacing the gingival margin about 0.2 mm laterally and exposing at least 0.5 mm of unprepared tooth.

A single retraction cord is left in place for 4 to 5 minutes; a dual-cord technique leaves the smaller cord in situ during impression taking.

Aluminium chloride causes no staining, whereas ferric sulphate stains tissue dark and interferes with resin bonding to dentine.

Adrenaline-impregnated retraction cord is not used in UK practice because of systemic cardiovascular risk.

Eugenol-containing temporary cements inhibit resin polymerisation, so a non-eugenol provisional cement must be used before adhesive cementation.

Last updated: September 2026

1. Gingival Retraction and Soft Tissue Management

Accurate marginal reproduction requires displacing the gingival margin 0.2 mm laterally and exposing at least 0.5 mm of unprepared tooth structure apical to the finish line , while maintaining absolute haemostasis and controlling crevicular exudate. Tissue Management Approaches

  • ┌────────────────────────────────────────────────────────┐
  • │ Gingival Retraction Methods │
  • └───────────────┬────────────────────────┬───────────────┘
  • │ │
  • Mechanical-Chemical Surgical
  • ┌────────┴────────┐ ┌────────┴────────┐
  • Single-Cord Dual-Cord Electrosurgery Diode Laser
  • (Shallow) (Deep/Ant) (Non-cardiac) (Safe/Implants)
  • Mechanical Retraction Techniques

Knitted vs Braided Cords: Knitted cords (sizes 000, 00, 0, 1, 2) expand upon wetting, exerting a continuous outward lateral force against the sulcular wall, making them superior to braided cords.

Single-Cord Technique:

Indicated for shallow, healthy sulci where preparations have supragingival or equigingival margins.

A medium cord (size 0 or 1) soaked in astringent is gently packed circumferentially using a thin, non-serrated cord packer. It is left in place for 4 to 5 minutes and removed immediately prior to injecting light-body wash.

Dual-Cord (Two-Cord) Technique:

The gold standard for subgingival margins, aesthetic anterior preparations, and impression taking in friable, hyperaemic tissue.

Step 1: A small first cord (size 000 or 00) is placed at the base of the sulcus to seal off apical fluid seepage and protect the junctional epithelium. This cord remains in place during impression taking.

Step 2: A larger second cord (size 1 or 2) is placed over the first cord to achieve lateral tissue deflection. It is left in situ for 3 to 5 minutes and removed immediately before injecting impression material.

Chemical Haemostatic Agents

Chemical Agent Concentration Mechanism of Action Clinical Advantages Disadvantages & Contraindications

Aluminium Chloride (AlCl₃) 15–25% Astringent; precipitates tissue proteins; causes local arteriolar constriction without blood clot formation. Clean, clear liquid; zero tissue staining ; does not inhibit resin bonding or elastomeric setting. Transient, mild tissue irritation; slower haemostasis than ferric sulphate in brisk bleeding.

Ferric Sulphate (Fe₂(SO₄)₃) 13–20% Potent haemostatic; reacts with blood proteins to form an instant ferric-protein coagulum plug. Rapid, profound haemostasis within seconds; highly effective for hyperaemic tissue. Stains dentine and gingiva dark brown/black ; acidic pH (1.0–2.0); coagulum inhibits PVS setting; interferes with resin dentine bonding .

Adrenaline (Epinephrine) 0.1–8% Direct α₁-adrenergic receptor stimulation producing profound local vasoconstriction. High haemostatic potency. Strictly contraindicated in UK practice ; risk of "adrenaline rush" (tachycardia, arrhythmia, hypertension), especially if sulcular epithelium is breached.

Surgical Retraction Modalities

Electrosurgery:

Utilizes a high-frequency unipolar alternating radio-current (1.5–3.0 MHz) to vaporize intracellular fluid, cutting tissue cleanly while sealing capillaries.

Contraindications: Strictly contraindicated in patients wearing cardiac pacemakers or implantable cardioverter-defibrillators (ICDs) . Must never touch titanium dental implants (causes electrical arcing and osseointegration failure) or contact alveolar bone (risks irreversible necrosis and sloughing).

Soft-Tissue Diode Laser (810–980 nm):

Highly absorbed by melanin and haemoglobin, providing precise soft tissue excision and simultaneous coagulation.

Advantages: Safe around dental implants and pacemakers; produces minimal thermal collateral damage (< 0.5 mm); causes virtually zero postoperative gingival recession compared to electrosurgery.

4. Provisional Restorations (Temporization)

Provisional restorations are an indispensable phase of fixed prosthodontic therapy, serving critical biological, mechanical, and diagnostic roles during the laboratory fabrication period. Functions of Provisional Restorations

  • Biological Mechanical Diagnostic
  • ┌──────────────────┐ ┌──────────────────┐ ┌──────────────────┐
  • │ Pulp protection │ │ Maintain space │ │ Aesthetic trial │
  • │ Prevent caries │ │ Prevent drift │ │ Phonetic check │
  • │ Gingival health │ │ Prevent supra-er.│ │ OVD verification │
  • └──────────────────┘ └──────────────────┘ └──────────────────┘
  • Primary Functions of Provisional Restorations

Biological Protection: Seals cut dentinal tubules against oral fluids, bacteria, and thermal extremes, preventing pulpal inflammation and necrosis; protects margins from secondary caries; preserves periodontal health by establishing correct emergence profiles and cleansable embrasures.

Mechanical Positional Stability: Maintains proximal contacts to prevent mesio-distal drift; maintains occlusal contacts to prevent supra-eruption of the prepared tooth or opposing dentition; resists occlusal forces without breaking.

Diagnostic Trial: Evaluates aesthetics, incisal edge position, smile line, lip support, and phonetics. Specifically, tests the 'F' and 'V' sounds (incisal edges of maxillary centrals should lightly contact the wet-dry line of the lower lip) and the 'S' sound (evaluates the closest speaking space, ensuring no tooth clatter at the proposed OVD).

Material Science: Bis-Acryl Composite vs PMMA

  • Property Bis-Acryl Composite (e.g., Protemp, Luxatemp) Polymethylmethacrylate (PMMA)
  • Chemistry Multifunctional methacrylate with glass fillers Monofunctional methyl methacrylate powder/liquid

Polymerization Exotherm Low (Minimal pulpal thermal trauma) High (Can cause pulpitis if cured directly in mouth)

  • Polymerization Shrinkage Low (1–2%; excellent marginal fit) High (6–8%; margins shrink significantly)
  • Flexural Strength High, but brittle in long-span bridges Moderate, but exhibits high toughness and ductility

Chairside Fabrication Ideal for direct intraoral matrix technique Better suited for indirect or laboratory fabrication

Repairability Poor (Requires flowable composite with bonding agent) Excellent (Chemically bonds with auto-polymerizing PMMA)

Temporary Luting Cements: The Eugenol Prohibition

Zinc Oxide Eugenol (ZOE - e.g., Temp-Bond): Eugenol provides an obtundent, sedative effect on hyperaemic dental pulp by inhibiting prostaglandin synthesis.

The Chemical Hazard: Eugenol contains a phenolic hydroxyl group that acts as an aggressive free-radical scavenger. If a provisional crown is cemented with ZOE, residual eugenol penetrates dentinal tubules and adsorbs to the preparation surface.

When the definitive restoration is subsequently cemented using a resin-based composite cement (e.g., Panavia, RelyX Ultimate), the residual eugenol poisons the free-radical polymerization of the methacrylate monomers , leading to incomplete resin cure, drastically reduced bond strength, microleakage, and premature crown debonding.

Clinical Rule: Whenever the definitive restoration is to be cemented with a resin cement or resin-modified glass ionomer, the provisional must be cemented exclusively with a Zinc Oxide Non-Eugenol (NE) cement (e.g., Temp-Bond NE).

6. Clinical Traps, Pitfalls, and Worked Scenarios

Caution

Clinical Trap: Cleaning Zirconia with Phosphoric Acid: After intraoral try-in of a zirconia crown, the clinician cleans the saliva-contaminated intaglio by applying 37% phosphoric acid etching gel for 30 seconds. This is a severe chemical error. The phosphate ions (PO₄³⁻) in the acid form irreversible ionic bonds with the reactive zirconium oxide sites on the ceramic surface. When the 10-MDP primer is subsequently applied, its dihydrogen phosphate groups cannot find free zirconium sites to bond with, destroying the chemical bond and causing premature crown debonding. Clean zirconia exclusively with 50 µm alumina sandblasting or an alkaline zirconia cleaner (Ivoclean).

Warning

Clinical Trap: Luting a Feldspathic Porcelain Crown with RMGIC: A clinician places a delicate anterior feldspathic porcelain jacket crown using Resin-Modified Glass Ionomer (Fuji Plus) because of its simple mixing and fluoride release. Six months later, the patient returns with a longitudinal "half-moon" catastrophic fracture across the facial margin. RMGICs absorb oral moisture, undergoing delayed hygroscopic expansion. The radial tensile stress generated by this expansion exceeds the low tensile strength (70 MPa) of feldspathic porcelain. Glass-ceramics must be bonded exclusively with resin cements.

Worked Clinical SBA Scenario

Scenario: A 32-year-old female attends for definitive cementation of a single lithium disilicate crown on tooth 21. At the previous preparation appointment, a bis-acryl provisional crown was cemented. Following removal of the provisional, the clinician notices localized bleeding at the palatal sulcus. The clinician aims to achieve reliable haemostasis and execute an evidence-based cementation protocol with a dual-cure resin cement.

Question: What is the most appropriate management of the soft tissue and conditioning of the ceramic restoration prior to cementation?

Clinical Reasoning Formulation:

Haemostatic Selection: Ferric sulphate rapidly arrests bleeding but causes dark coagulum staining on tooth structure and leaves residual ferric ions that impair resin dentine hybridization and polymerization. Because a resin cement is planned in the aesthetic zone, aluminium chloride (15–25%) is mandatory to achieve haemostasis without staining or interfering with resin polymerization.

Provisional Cement Verification: The provisional must have been luted with zinc oxide non-eugenol cement; any residual eugenol would inhibit the polymerization of the dual-cure resin.

Glass-Ceramic Conditioning: Lithium disilicate is a glass-matrix ceramic. The intaglio must be treated with 4.5–5% hydrofluoric acid for 20 seconds , rinsed thoroughly, and dried. Subsequently, a silane coupling agent must be applied for 60 seconds to establish covalent siloxane bridges between the ceramic silica and the resin cement matrix.

Definitive Step: Dual-cure resin cement is loaded, the crown seated, excess tacked and removed, and final light curing completed under glycerin gel to prevent oxygen inhibition.