Study guide

26.2 Complete Dentures: Principles, Impressions and Jaw Registration

Overseas Registration Examination ORE

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: ORE Part 1 — Exam Blueprint, Logistics and Strategy

1.1 Structure and Format of ORE Part 1 1.2 The Official Blueprint and Preparing for Practice 1.3 Eligibility, Fees, Attempts and Time Limits

2 Chapter 2: Anatomy of the Head and Neck

2.1 The Trigeminal Nerve and Dental Innervation 2.2 The Facial Nerve and Parotid Region 2.3 The Temporomandibular Joint and Muscles of Mastication 2.4 The Infratemporal Fossa and Spread of Odontogenic Infection

3 Chapter 3: Dental Anatomy, Morphology and Occlusion

3.1 Permanent and Primary Tooth Morphology 3.2 Functional Occlusion: Centric Relation, Guidance and Interferences 3.3 Classifying Occlusion: Angle and BSI Incisor Relationships

4 Chapter 4: Genetics, Embryology and Odontogenesis

4.1 Stages of Odontogenesis and Molecular Signalling 4.2 Amelogenesis and Enamel Microstructure 4.3 Dentinogenesis and the Pulp-Dentine Complex 4.4 Cementum, the Periodontal Ligament and Oral Mucosa 4.5 Genetic and Developmental Dental Anomalies

5 Chapter 5: Oral Biology and Salivary Physiology

5.1 Salivary Gland Anatomy, Microarchitecture and Innervation 5.2 Salivary Secretion, Flow Rates and Autonomic Control 5.3 Salivary Buffering Systems and Protective Macromolecules 5.4 Physiology of Mastication and Deglutition 5.5 Taste, Lingual Papillae and Gustatory Pathways 5.6 Xerostomia, Sjogren's Syndrome and Salivary Diagnostics

6 Chapter 6: Physiology of the Major Body Systems

6.1 Cardiovascular and Respiratory Physiology 6.2 Renal, Endocrine and Gastrointestinal Physiology 6.3 Haematology and Haemostasis 6.4 Neurophysiology, Pain and the Autonomic Nervous System

7 Chapter 7: Bone Biology, Calcium Homeostasis and Healing

7.1 Microstructure and Architecture of Alveolar Bone 7.2 Bone Remodelling and the RANK/RANKL/OPG Axis 7.3 Endocrine Control of Calcium and Phosphate 7.4 Extraction Socket Healing and Ridge Resorption 7.5 Impaired Healing: MRONJ, Osteoradionecrosis and Systemic Risk

8 Chapter 8: Oral Microbiology and Biofilm Ecology

8.1 The Oral Microbiome and Biofilm Development 8.2 Cariogenic Microbiology: Mutans Streptococci and Lactobacilli 8.3 Ecological Hypotheses of Dental Caries 8.4 Biofilm Tolerance and the Case for Mechanical Plaque Control

9 Chapter 9: Immunology Relevant to Oral Disease

9.1 Innate Mucosal Immunity and Gingival Crevicular Fluid 9.2 Cellular Immunity in the Periodontium 9.3 Microbial Pathogenesis: Complexes and Keystone Pathogens 9.4 Host-Mediated Tissue Destruction 9.5 Hypersensitivity Reactions in Dental Practice 9.6 Autoimmune Mucocutaneous Bullous Disease 9.7 Immunodeficiency and Oral HIV Manifestations

10 Chapter 10: General Pathology and Neoplasia

10.1 Cellular Adaptation and Mechanisms of Cell Death 10.2 Inflammation, Wound Healing and Repair 10.3 Principles of Neoplasia and Carcinogenesis 10.4 TNM Staging of Oral Cavity Carcinoma

11 Chapter 11: Statistics and Research Methods

11.1 Study Designs and the Hierarchy of Evidence 11.2 Descriptive and Inferential Statistics 11.3 Diagnostic Test Performance 11.4 Critical Appraisal, Bias and Research Governance

12 Chapter 12: Human Disease: Cardiovascular and Respiratory

12.1 Infective Endocarditis and NICE CG64 12.2 Hypertension and Blood Pressure Thresholds for Dental Care 12.3 Angina, Myocardial Infarction and Antiplatelet Therapy 12.4 Asthma, COPD and Respiratory Emergencies

13 Chapter 13: Human Disease: Endocrine, Haematological and Renal

13.1 Diabetes Mellitus and the Periodontal Axis 13.2 Congenital Bleeding and Clotting Disorders 13.3 Anticoagulants and Antiplatelets: The SDCEP Protocol 13.4 Chronic Kidney Disease and Haemodialysis

14 Chapter 14: Human Disease: Gastrointestinal, Hepatic and Neurological

14.1 Gastrointestinal Disease and Intrinsic Dental Erosion 14.2 Liver Disease, Coagulopathy and Viral Hepatitis 14.3 Epilepsy, Stroke and Transient Ischaemic Attack 14.4 Trigeminal Neuralgia, Bell's Palsy and Giant Cell Arteritis

15 Chapter 15: Oral Aspects of Human Disease

15.1 Oral Manifestations of Systemic Disease 15.2 Orofacial Pain and Temporomandibular Disorders 15.3 Dry Mouth, Altered Taste and Halitosis

16 Chapter 16: Infection Prevention and Control

16.1 The Decontamination Cycle, Sterilization and Waterlines 16.2 Routes of Transmission and Blood-Borne Viruses

17 Chapter 17: Dental Materials

17.1 Dental Amalgam: Metallurgy and UK Regulation 17.2 Resin Composites: Chemistry and Placement 17.3 Dental Adhesive Systems 17.4 Acid Etching, the Hybrid Layer and MMP Degradation 17.5 Glass Ionomer Cements, RMGICs and Compomers 17.6 Impression Materials and Digital Scanning 17.7 Luting Cements and Adhesive Conditioning Protocols 17.8 Dental Ceramics and Cast Alloys 17.9 Gypsum Products, Waxes and Denture Base Polymers

18 Chapter 18: Behavioural Sciences Relevant to Oral Health Care

18.1 Health Behaviour Models and Behaviour Change 18.2 Dental Anxiety and Phobia 18.3 Psychosocial and Sociological Determinants of Oral Health

19 Chapter 19: Patient Assessment and Diagnosis

19.1 History Taking and Clinical Examination 19.2 Special Investigations and Reaching a Diagnosis

20 Chapter 20: Treatment Planning and Risk-Based Care

20.1 Treatment Planning and Sequencing 20.2 Risk Assessment, Recall Intervals and Preventive Planning

21 Chapter 21: Cariology and Caries Risk Assessment

21.1 Caries Pathogenesis and the Stephan Curve 21.2 Histopathology of Enamel and Dentinal Caries 21.3 Caries Diagnosis, ICDAS and Risk Assessment

22 Chapter 22: Operative Dentistry and Minimal Intervention

22.1 Minimal Intervention and Selective Caries Removal 22.2 Pulp Vitality Assessment and Biological Pulp Capping 22.3 Cavity Design, the C-Factor and Margin Geometry

23 Chapter 23: Endodontics

23.1 Pulp Histology and the Low-Compliance Environment 23.2 Pulpal Neurophysiology and Dentine Hypersensitivity 23.3 Pulpal and Periapical Diagnostic Terminology 23.4 Endodontic Diagnostic Testing 23.5 Access Cavity Design and Canal Configurations 23.6 Working Length Determination and Canal Preparation 23.7 Chemical Disinfection and Irrigant Activation 23.8 Medicaments, Obturation Materials and Techniques 23.9 Restoring Endodontically Treated Teeth 23.10 Endodontic Emergencies, Cracked Teeth and Root Fracture

24 Chapter 24: Periodontology

24.1 The 2018 Classification and Periodontal Health 24.2 Plaque-Induced and Non-Plaque-Induced Gingival Disease 24.3 Staging and Grading Periodontitis 24.4 Peri-Implant Disease and Systemic Risk Factors 24.5 The Basic Periodontal Examination 24.6 Simplified BPE in Children and Full Periodontal Charting 24.7 Furcation Involvement, Mobility and Occlusal Trauma 24.8 The BSP Stepwise Treatment Framework 24.9 Periodontal Instrumentation and Healing 24.10 Re-Evaluation, Endpoints and Periodontal Surgery 24.11 Crown Lengthening, Supracrestal Attachment and Supportive Care

25 Chapter 25: Fixed Prosthodontics

25.1 Biomechanical Principles of Tooth Preparation 25.2 Margin Design and the Supracrestal Attachment 25.3 Bridge Design and Resin-Bonded Bridges 25.4 Gingival Retraction, Provisionals and Temporary Cements

26 Chapter 26: Removable Prosthodontics

26.1 Removable Partial Dentures: Classification, Design and Surveying 26.2 Complete Dentures: Principles, Impressions and Jaw Registration

27 Chapter 27: Paediatric Dentistry

27.1 Primary Tooth Anatomy and Caries Management Strategies 27.2 Preformed Metal Crowns and the Hall Technique 27.3 Pulp Therapy in Primary Teeth 27.4 Extractions in the Primary Dentition 27.5 Non-Pharmacological Behaviour Management 27.6 Inhalation Sedation in Paediatric Dentistry 27.7 The Developing Dentition and Space Management 27.8 Serial Extraction and Non-Nutritive Sucking Habits

28 Chapter 28: Dental Traumatology

28.1 Trauma Assessment and Fractures of Permanent Teeth 28.2 Luxation Injuries, Avulsion and Replantation 28.3 Primary Tooth Trauma and Splinting Specifications

29 Chapter 29: Orthodontics

29.1 Extraoral Orthodontic Assessment 29.2 Intraoral Occlusal Assessment 29.3 Skeletal Pattern and Cephalometric Analysis 29.4 IOTN and NHS Treatment Eligibility 29.5 Upper Removable Appliances 29.6 Functional and Fixed Appliances 29.7 Biology of Orthodontic Tooth Movement 29.8 Orthodontic Risks and Retention

30 Chapter 30: Oral Surgery

30.1 Exodontia Biomechanics and Instrument Selection 30.2 Surgical Flap Design, Bone Removal and Suturing 30.3 Third Molar Surgery and NICE Guidance 30.4 Dry Socket and Oroantral Communication 30.5 Odontogenic Infection and Fascial Space Spread

31 Chapter 31: Oral Medicine

31.1 Recurrent Aphthous Stomatitis 31.2 Oral Candidiasis 31.3 Viral Oral Infections 31.4 Reactive Soft Tissue Lesions and the Epulides 31.5 Oral Potentially Malignant Disorders 31.6 Oral Squamous Cell Carcinoma, Urgent Referral and Biopsy

32 Chapter 32: Oral Pathology

32.1 Odontogenic and Non-Odontogenic Cysts 32.2 Odontogenic Tumours 32.3 Obstructive and Reactive Salivary Gland Disease 32.4 Salivary Gland Neoplasms

33 Chapter 33: Therapeutics and Prescribing

33.1 Local Anaesthetic Chemistry and Mechanism of Action 33.2 UK Local Anaesthetic Formulations 33.3 Vasoconstrictors, Maximum Doses and Systemic Toxicity 33.4 Analgesics for Acute Dental Pain 33.5 Antimicrobial Stewardship and First-Line Regimens 33.6 Antifungal and Antiviral Therapeutics

34 Chapter 34: Medical Emergencies in Dental Practice

34.1 The ABCDE Approach and the Emergency Drug Kit 34.2 Anaphylaxis and Acute Coronary Syndrome 34.3 Hypoglycaemia, Acute Asthma and Seizures 34.4 Syncope, Adrenal Crisis, Choking and Resuscitation

35 Chapter 35: Dental Radiology and Radiation Protection

35.1 Radiation Physics, Filtration and Collimation 35.2 Intraoral, Bitewing and Occlusal Projections 35.3 Dental Panoramic Tomography: Principles, Positioning and Errors 35.4 Lateral Cephalometry and Cone Beam CT 35.5 Systematic Reporting and Radiographic Caries Diagnosis 35.6 Radiology of Periodontal Bone Loss and Jaw Lesions 35.7 Radiographic Quality Assurance 35.8 IRR17 and IR(ME)R 2017

36 Chapter 36: Special Care Dentistry and Conscious Sedation

36.1 Special Care Dentistry, Risk Stratification and Sedation Principles 36.2 Inhalation Sedation with Nitrous Oxide 36.3 Intravenous Sedation with Midazolam 36.4 Oral Sedation and General Anaesthesia Referral

37 Chapter 37: Dental Public Health

37.1 Delivering Better Oral Health and the Fluoride Toolkit 37.2 Oral Health Epidemiology and Indices 37.3 Inequalities, Water Fluoridation and Population Prevention 37.4 NHS Dental Services, Access and Commissioning

38 Chapter 38: Communication and Interpersonal Skills

38.1 Patient Communication and Shared Decision-Making 38.2 Breaking Bad News, Complaints and the Duty of Candour 38.3 Referrals, Records and Communication with the Team

39 Chapter 39: Consent and Capacity

39.1 Valid Consent and the Montgomery Standard 39.2 The Mental Capacity Act 2005 39.3 Best Interests Decisions and Lasting Power of Attorney 39.4 Consent in Children and Young People 39.5 Safeguarding Children and Vulnerable Adults 39.6 Confidentiality, Data Protection and Lawful Disclosure

40 Chapter 40: Clinical Professionalism and the GDC

40.1 The General Dental Council and Standards Principles 1 to 4 40.2 GDC Standards: Principles 5 to 9 40.3 The GDC Fitness to Practise Process 40.4 Clinical Governance and the Audit Cycle

41 Chapter 41: Health and Safety Law in Dental Practice

41.1 Health and Safety Legislation, COSHH, RIDDOR and Sharps

42 Chapter 42: Self-Management and Professional Development

42.1 Enhanced CPD, Lifelong Learning and Reflective Practice 42.2 Managing Time, Stress and Clinical Wellbeing 42.3 Leadership, Delegation and Practice Management

26.2 Complete Dentures: Principles, Impressions and Jaw Registration

Key Takeaways Explain This Topic AI

Retention resists vertical displacement, stability resists horizontal and rotational displacement, and support resists vertical seating forces.

The primary stress-bearing area of the maxilla is the horizontal hard palate and of the mandible the buccal shelf.

Freeway space equals resting vertical dimension minus occlusal vertical dimension and is normally 2.0 to 4.0 mm.

An excessive occlusal vertical dimension leaves freeway space below 2.0 mm and causes constant tooth contact, muscle fatigue and soreness.

An insufficient occlusal vertical dimension leaves freeway space above 4.0 mm and causes over-closure, cheek biting and angular cheilitis.

Last updated: September 2026

4. Complete Dentures: Principles & Anatomical Foundations

Complete denture success is governed by the classic triad: Retention , Stability , and Support . The Complete Denture Triad

  • Retention
  • (Resists Vertical
  • Pulling Forces)
  • / \
  • / \
  • / \
  • Stability Support
  • (Resists Lateral (Resists Vertical
  • / Rotational) Masticatory Load)
  • Definitions and Biomechanical Drivers

Retention: Resistance to displacement of the denture base away from the underlying tissues along the vertical path of withdrawal.

Physical Forces: Adhesion (attraction between unlike molecules: saliva wetting acrylic and mucosa), Cohesion (attraction between like molecules within the thin saliva film), and Atmospheric Pressure .

The Peripheral Seal: Retention requires an unbroken, intimate border seal along the entire mucosal sulcus and across the posterior palatal seal ( vibrating line between movable and immovable soft palate). Loss of seal eliminates atmospheric pressure differential, causing instant denture drop.

Stability: Resistance to horizontal, lateral, and rotational displacement forces generated during mastication, swallowing, and speech.

Driven by alveolar ridge height and contour, precise polished surface shaping (concave buccal contours allowing buccinator and tongue muscle forces to seat the denture), and positioning teeth within the Neutral Zone (the physiological space where outward forces of the tongue are balanced by inward forces of the lips and cheeks).

Support: Resistance to vertical masticatory loads directed toward the basal tissue seat, preventing displacement and trauma to underlying mucosa and bone.

Stress-Bearing Anatomical Landmarks

Jaw Primary Stress-Bearing Area Secondary Stress-Bearing Area Relief Areas (Non-Bearing)

Maxilla Horizontal Hard Palate (Palatine processes of maxilla and horizontal plates of palatine bones) and Maxillary Tuberosities . Dense cortical bone resistant to resorption. Slopes of the residual alveolar ridge. Incisive Papilla (prevents burning sensations from nasopalatine nerve compression), Midpalatal Raphe / Torus, Sharp Rugae.

Mandible Buccal Shelf of Bone (Bounded medially by crest of ridge, laterally by external oblique ridge, posteriorly by retromolar pad; dense cortical bone oriented perpendicular to occlusal forces) and Retromolar Pad . Slopes of the residual ridge. Crest of the Knife-Edge Alveolar Ridge (thin fibrous mucosa), Mental Foramen (if resorbed), Lingual Torus, Genial Tubercles.

  • 5. Complete Denture Impression Protocols and Jaw Registration
  • Two-Stage Impression Sequence

Primary Impression: Recorded in stock trays using alginate (irreversible hydrocolloid) or impression compound . Used to cast primary models and fabricate custom (special) trays.

Custom Tray Spacing: Acrylic tray constructed with a 2.0–3.0 mm wax spacer for alginate or elastomeric impressions, or a close-fitting (0.5–1.0 mm) tray for zinc oxide eugenol.

Border Moulding (Peripheral Tracing): Green stick thermoplastic compound heated to 55–60°C is applied incrementally to tray borders. The clinician manipulates lips, cheeks, and tongue through active functional movements (cheek stretching, puckering, swallowing, tongue protrusion) to dynamically capture the full physiological depth and width of the sulci, establishing the border seal.

Secondary (Definitive Wash) Impression: Executed using Zinc Oxide Eugenol (ZOE) paste (the historical standard for mucostatic capture of firm, healthy mucosa) or light-body addition silicone. Produces the master cast for baseplate construction.

Jaw Relationship Records: Vertical Dimension and Freeway Space

Accurate jaw registration requires establishing the correct vertical dimension of occlusion and recording Centric Relation. Vertical Dimensions of the Face

  • ┌────────────────────────────────────────────────────────┐ ── Subnasale (Nose Tip)
  • │ │
  • │ Resting Vertical Dimension (RVD) │
  • │ (Mandible at physiological rest; muscles in tone) │
  • │ │
  • │ ┌──────────────────────────────────────────────────┐ │
  • │ │ Occlusal Vertical Dimension (OVD) │ │
  • │ │ (Teeth or wax rims in maximal intercuspation) │ │
  • │ └──────────────────────────────────────────────────┘ │
  • │ ┌──────────────────────────────────────────────────┐ │
  • │ │ Freeway Space (FWS = RVD - OVD) [2 to 4 mm] │ │
  • │ └──────────────────────────────────────────────────┘ │
  • └────────────────────────────────────────────────────────┘ ── Gnathion (Chin Tip)

Resting Vertical Dimension (RVD): The vertical separation between two arbitrary cutaneous reference points (one on the nose, one on the chin) when the patient is sitting comfortably upright and the masticatory musculature is in a state of minimal tonic contraction. Measured using a Willis gauge or Alma gauge.

Occlusal Vertical Dimension (OVD): The vertical distance between the same two landmarks when the occlusal rims or teeth are in complete intercuspal contact.

Freeway Space (Interocclusal Rest Space, FWS): The physiological clearance space between the occlusal surfaces of the maxillary and mandibular teeth when the mandible is in its physiological rest position: Freeway Space (FWS) = RVD − OVD \text{Freeway Space (FWS)} = \text{RVD} - \text{OVD} Freeway Space (FWS) = RVD − OVD

Normal Physiological Range: 2.0 to 4.0 mm .

Consequences of Vertical Dimension Errors

Vertical Dimension Error Freeway Space (FWS) Clinical Signs & Biological Consequences

Excessive OVD (Over-opened bite) < 2.0 mm (or zero) Constant muscular strain in masseter and temporalis; "clicking" of denture teeth during speech; difficulty swallowing; inability to close lips at rest; rapid, painful alveolar bone resorption due to continuous occlusal impact loading.

Insufficient OVD (Over-closed bite) > 4.0 mm (Excessive) Reduced masticatory efficiency; facial collapse (sunken cheeks, thinned vermilion border, protruding "Punch-and-Judy" chin); persistent saliva pooling at labial commissures predisposing to Angular Cheilitis ( Candida albicans and Staphylococcus aureus superinfection); TMJ discomfort.

Centric Relation (CR) and Rim Contouring

Centric Relation: The reproducible maxillomandibular relationship in which the condyles articulate with the thinnest avascular portion of their respective discs with the complex in the anterior-superior position against the slopes of the articular eminences . It is completely independent of tooth contact.

Wax Rim Contouring:

Upper Rim: Contoured to provide adequate lip support; incisal display of 1.0–2.0 mm below the resting upper lip in young patients (flush with lip in elderly); anterior plane parallel to the interpupillary line ; posterior occlusal plane parallel to Camper's Line (Ala-Tragus line) , verified using a Fox bite plane.

Centric Relation Record: Recorded at the established OVD using bimanual condylar guidance (Dawson technique) or gentle chin-point guidance with quick-setting registration material.

Facebow Transfer: Captures the 3D spatial relationship of the maxillary dental arch relative to the transverse horizontal hinge axis of the condyles, enabling accurate transfer to a semi-adjustable articulator.

6. Clinical Traps, Pitfalls, and Worked Scenarios

Caution

Clinical Trap: Prescribing a Lingual Bar in a Shallow Sulcus: A clinician examines a partially dentate patient missing teeth 36, 37, 46, and 47. The clinician measures the vertical height from the lingual gingival margin to the resting floor of the mouth as 8.0 mm and prescribes a cast cobalt-chromium lingual bar. However, when the patient elevates the tongue during functional swallowing, the active lingual frenum and sublingual tissues elevate, reducing the functional sulcus depth to only 5.0 mm. When the denture is fitted, the rigid 4 mm lingual bar impinges continuously on the elevated floor of the mouth, causing severe sublingual ulceration. Always measure lingual sulcus depth dynamically during active tongue elevation . If functional depth is < 7.0 mm, a lingual plate must be prescribed.

Warning

Clinical Trap: Misdiagnosing Denture Looseness Caused by Excessive OVD: An edentulous patient attends two weeks post-delivery of new complete dentures complaining that the lower denture "keeps popping up and hurts when chewing." The clinician assumes poor lower ridge retention and attempts multiple relines with soft materials. In reality, the OVD was fabricated 4 mm too open, leaving zero freeway space. Whenever the patient attempts to speak or swallow, the mandibular teeth crash against the maxillary teeth, dislodging the lower denture. Always check RVD and OVD before adjusting retention.

Worked Clinical SBA Scenario

Scenario: A 68-year-old male presents for replacement of his complete upper and lower acrylic dentures, which he has worn for 12 years. Clinical examination reveals severe bilateral erythema, maceration, and painful fissuring at the labial commissures of his lips. When his existing dentures are in maximum intercuspation, his chin appears prominently elevated, his lips are compressed, and his facial profile appears collapsed. Facial measurement reveals an RVD of 68 mm and an OVD of 59 mm.

Question: What is the underlying prosthodontic cause of the patient's commissural lesions, and what is the primary corrective clinical adjustment required in his new dentures?

Clinical Reasoning Formulation:

Calculation of Freeway Space: The patient's Resting Vertical Dimension (RVD) is 68 mm and Occlusal Vertical Dimension (OVD) is 59 mm. Freeway Space (FWS) = RVD − OVD = 68 mm − 59 mm = 9.0 mm \text{Freeway Space (FWS)} = \text{RVD} - \text{OVD} = 68\text{ mm} - 59\text{ mm} = 9.0\text{ mm} Freeway Space (FWS) = RVD − OVD = 68 mm − 59 mm = 9.0 mm

Analysis of Vertical Dimension: Normal physiological freeway space is 2.0 to 4.0 mm. A freeway space of 9.0 mm represents severe over-closure (insufficient OVD) due to long-term wear of the denture teeth and alveolar ridge resorption.

Pathology: Insufficient OVD causes facial collapse, lip over-closure, and deep creasing at the angles of the mouth. Saliva chronically pools in these folded commissures, creating a warm, macerated environment that promotes Angular Cheilitis caused by opportunistic Candida albicans and Staphylococcus aureus infection.

Definitive Treatment: The patient requires anti-fungal/anti-bacterial pharmacotherapy to resolve the acute infection, followed by construction of new complete dentures with an increased OVD (restoring freeway space to the ideal 2 to 4 mm) to physically eliminate the commissural skin folds.