Study guide
26.1 Removable Partial Dentures: Classification, Design and Surveying
Overseas Registration Examination ORE
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: ORE Part 1 — Exam Blueprint, Logistics and Strategy
1.1 Structure and Format of ORE Part 1 1.2 The Official Blueprint and Preparing for Practice 1.3 Eligibility, Fees, Attempts and Time Limits
2 Chapter 2: Anatomy of the Head and Neck
2.1 The Trigeminal Nerve and Dental Innervation 2.2 The Facial Nerve and Parotid Region 2.3 The Temporomandibular Joint and Muscles of Mastication 2.4 The Infratemporal Fossa and Spread of Odontogenic Infection
3 Chapter 3: Dental Anatomy, Morphology and Occlusion
3.1 Permanent and Primary Tooth Morphology 3.2 Functional Occlusion: Centric Relation, Guidance and Interferences 3.3 Classifying Occlusion: Angle and BSI Incisor Relationships
4 Chapter 4: Genetics, Embryology and Odontogenesis
4.1 Stages of Odontogenesis and Molecular Signalling 4.2 Amelogenesis and Enamel Microstructure 4.3 Dentinogenesis and the Pulp-Dentine Complex 4.4 Cementum, the Periodontal Ligament and Oral Mucosa 4.5 Genetic and Developmental Dental Anomalies
5 Chapter 5: Oral Biology and Salivary Physiology
5.1 Salivary Gland Anatomy, Microarchitecture and Innervation 5.2 Salivary Secretion, Flow Rates and Autonomic Control 5.3 Salivary Buffering Systems and Protective Macromolecules 5.4 Physiology of Mastication and Deglutition 5.5 Taste, Lingual Papillae and Gustatory Pathways 5.6 Xerostomia, Sjogren's Syndrome and Salivary Diagnostics
6 Chapter 6: Physiology of the Major Body Systems
6.1 Cardiovascular and Respiratory Physiology 6.2 Renal, Endocrine and Gastrointestinal Physiology 6.3 Haematology and Haemostasis 6.4 Neurophysiology, Pain and the Autonomic Nervous System
7 Chapter 7: Bone Biology, Calcium Homeostasis and Healing
7.1 Microstructure and Architecture of Alveolar Bone 7.2 Bone Remodelling and the RANK/RANKL/OPG Axis 7.3 Endocrine Control of Calcium and Phosphate 7.4 Extraction Socket Healing and Ridge Resorption 7.5 Impaired Healing: MRONJ, Osteoradionecrosis and Systemic Risk
8 Chapter 8: Oral Microbiology and Biofilm Ecology
8.1 The Oral Microbiome and Biofilm Development 8.2 Cariogenic Microbiology: Mutans Streptococci and Lactobacilli 8.3 Ecological Hypotheses of Dental Caries 8.4 Biofilm Tolerance and the Case for Mechanical Plaque Control
9 Chapter 9: Immunology Relevant to Oral Disease
9.1 Innate Mucosal Immunity and Gingival Crevicular Fluid 9.2 Cellular Immunity in the Periodontium 9.3 Microbial Pathogenesis: Complexes and Keystone Pathogens 9.4 Host-Mediated Tissue Destruction 9.5 Hypersensitivity Reactions in Dental Practice 9.6 Autoimmune Mucocutaneous Bullous Disease 9.7 Immunodeficiency and Oral HIV Manifestations
10 Chapter 10: General Pathology and Neoplasia
10.1 Cellular Adaptation and Mechanisms of Cell Death 10.2 Inflammation, Wound Healing and Repair 10.3 Principles of Neoplasia and Carcinogenesis 10.4 TNM Staging of Oral Cavity Carcinoma
11 Chapter 11: Statistics and Research Methods
11.1 Study Designs and the Hierarchy of Evidence 11.2 Descriptive and Inferential Statistics 11.3 Diagnostic Test Performance 11.4 Critical Appraisal, Bias and Research Governance
12 Chapter 12: Human Disease: Cardiovascular and Respiratory
12.1 Infective Endocarditis and NICE CG64 12.2 Hypertension and Blood Pressure Thresholds for Dental Care 12.3 Angina, Myocardial Infarction and Antiplatelet Therapy 12.4 Asthma, COPD and Respiratory Emergencies
13 Chapter 13: Human Disease: Endocrine, Haematological and Renal
13.1 Diabetes Mellitus and the Periodontal Axis 13.2 Congenital Bleeding and Clotting Disorders 13.3 Anticoagulants and Antiplatelets: The SDCEP Protocol 13.4 Chronic Kidney Disease and Haemodialysis
14 Chapter 14: Human Disease: Gastrointestinal, Hepatic and Neurological
14.1 Gastrointestinal Disease and Intrinsic Dental Erosion 14.2 Liver Disease, Coagulopathy and Viral Hepatitis 14.3 Epilepsy, Stroke and Transient Ischaemic Attack 14.4 Trigeminal Neuralgia, Bell's Palsy and Giant Cell Arteritis
15 Chapter 15: Oral Aspects of Human Disease
15.1 Oral Manifestations of Systemic Disease 15.2 Orofacial Pain and Temporomandibular Disorders 15.3 Dry Mouth, Altered Taste and Halitosis
16 Chapter 16: Infection Prevention and Control
16.1 The Decontamination Cycle, Sterilization and Waterlines 16.2 Routes of Transmission and Blood-Borne Viruses
17 Chapter 17: Dental Materials
17.1 Dental Amalgam: Metallurgy and UK Regulation 17.2 Resin Composites: Chemistry and Placement 17.3 Dental Adhesive Systems 17.4 Acid Etching, the Hybrid Layer and MMP Degradation 17.5 Glass Ionomer Cements, RMGICs and Compomers 17.6 Impression Materials and Digital Scanning 17.7 Luting Cements and Adhesive Conditioning Protocols 17.8 Dental Ceramics and Cast Alloys 17.9 Gypsum Products, Waxes and Denture Base Polymers
18 Chapter 18: Behavioural Sciences Relevant to Oral Health Care
18.1 Health Behaviour Models and Behaviour Change 18.2 Dental Anxiety and Phobia 18.3 Psychosocial and Sociological Determinants of Oral Health
19 Chapter 19: Patient Assessment and Diagnosis
19.1 History Taking and Clinical Examination 19.2 Special Investigations and Reaching a Diagnosis
20 Chapter 20: Treatment Planning and Risk-Based Care
20.1 Treatment Planning and Sequencing 20.2 Risk Assessment, Recall Intervals and Preventive Planning
21 Chapter 21: Cariology and Caries Risk Assessment
21.1 Caries Pathogenesis and the Stephan Curve 21.2 Histopathology of Enamel and Dentinal Caries 21.3 Caries Diagnosis, ICDAS and Risk Assessment
22 Chapter 22: Operative Dentistry and Minimal Intervention
22.1 Minimal Intervention and Selective Caries Removal 22.2 Pulp Vitality Assessment and Biological Pulp Capping 22.3 Cavity Design, the C-Factor and Margin Geometry
23 Chapter 23: Endodontics
23.1 Pulp Histology and the Low-Compliance Environment 23.2 Pulpal Neurophysiology and Dentine Hypersensitivity 23.3 Pulpal and Periapical Diagnostic Terminology 23.4 Endodontic Diagnostic Testing 23.5 Access Cavity Design and Canal Configurations 23.6 Working Length Determination and Canal Preparation 23.7 Chemical Disinfection and Irrigant Activation 23.8 Medicaments, Obturation Materials and Techniques 23.9 Restoring Endodontically Treated Teeth 23.10 Endodontic Emergencies, Cracked Teeth and Root Fracture
24 Chapter 24: Periodontology
24.1 The 2018 Classification and Periodontal Health 24.2 Plaque-Induced and Non-Plaque-Induced Gingival Disease 24.3 Staging and Grading Periodontitis 24.4 Peri-Implant Disease and Systemic Risk Factors 24.5 The Basic Periodontal Examination 24.6 Simplified BPE in Children and Full Periodontal Charting 24.7 Furcation Involvement, Mobility and Occlusal Trauma 24.8 The BSP Stepwise Treatment Framework 24.9 Periodontal Instrumentation and Healing 24.10 Re-Evaluation, Endpoints and Periodontal Surgery 24.11 Crown Lengthening, Supracrestal Attachment and Supportive Care
25 Chapter 25: Fixed Prosthodontics
25.1 Biomechanical Principles of Tooth Preparation 25.2 Margin Design and the Supracrestal Attachment 25.3 Bridge Design and Resin-Bonded Bridges 25.4 Gingival Retraction, Provisionals and Temporary Cements
26 Chapter 26: Removable Prosthodontics
26.1 Removable Partial Dentures: Classification, Design and Surveying 26.2 Complete Dentures: Principles, Impressions and Jaw Registration
27 Chapter 27: Paediatric Dentistry
27.1 Primary Tooth Anatomy and Caries Management Strategies 27.2 Preformed Metal Crowns and the Hall Technique 27.3 Pulp Therapy in Primary Teeth 27.4 Extractions in the Primary Dentition 27.5 Non-Pharmacological Behaviour Management 27.6 Inhalation Sedation in Paediatric Dentistry 27.7 The Developing Dentition and Space Management 27.8 Serial Extraction and Non-Nutritive Sucking Habits
28 Chapter 28: Dental Traumatology
28.1 Trauma Assessment and Fractures of Permanent Teeth 28.2 Luxation Injuries, Avulsion and Replantation 28.3 Primary Tooth Trauma and Splinting Specifications
29 Chapter 29: Orthodontics
29.1 Extraoral Orthodontic Assessment 29.2 Intraoral Occlusal Assessment 29.3 Skeletal Pattern and Cephalometric Analysis 29.4 IOTN and NHS Treatment Eligibility 29.5 Upper Removable Appliances 29.6 Functional and Fixed Appliances 29.7 Biology of Orthodontic Tooth Movement 29.8 Orthodontic Risks and Retention
30 Chapter 30: Oral Surgery
30.1 Exodontia Biomechanics and Instrument Selection 30.2 Surgical Flap Design, Bone Removal and Suturing 30.3 Third Molar Surgery and NICE Guidance 30.4 Dry Socket and Oroantral Communication 30.5 Odontogenic Infection and Fascial Space Spread
31 Chapter 31: Oral Medicine
31.1 Recurrent Aphthous Stomatitis 31.2 Oral Candidiasis 31.3 Viral Oral Infections 31.4 Reactive Soft Tissue Lesions and the Epulides 31.5 Oral Potentially Malignant Disorders 31.6 Oral Squamous Cell Carcinoma, Urgent Referral and Biopsy
32 Chapter 32: Oral Pathology
32.1 Odontogenic and Non-Odontogenic Cysts 32.2 Odontogenic Tumours 32.3 Obstructive and Reactive Salivary Gland Disease 32.4 Salivary Gland Neoplasms
33 Chapter 33: Therapeutics and Prescribing
33.1 Local Anaesthetic Chemistry and Mechanism of Action 33.2 UK Local Anaesthetic Formulations 33.3 Vasoconstrictors, Maximum Doses and Systemic Toxicity 33.4 Analgesics for Acute Dental Pain 33.5 Antimicrobial Stewardship and First-Line Regimens 33.6 Antifungal and Antiviral Therapeutics
34 Chapter 34: Medical Emergencies in Dental Practice
34.1 The ABCDE Approach and the Emergency Drug Kit 34.2 Anaphylaxis and Acute Coronary Syndrome 34.3 Hypoglycaemia, Acute Asthma and Seizures 34.4 Syncope, Adrenal Crisis, Choking and Resuscitation
35 Chapter 35: Dental Radiology and Radiation Protection
35.1 Radiation Physics, Filtration and Collimation 35.2 Intraoral, Bitewing and Occlusal Projections 35.3 Dental Panoramic Tomography: Principles, Positioning and Errors 35.4 Lateral Cephalometry and Cone Beam CT 35.5 Systematic Reporting and Radiographic Caries Diagnosis 35.6 Radiology of Periodontal Bone Loss and Jaw Lesions 35.7 Radiographic Quality Assurance 35.8 IRR17 and IR(ME)R 2017
36 Chapter 36: Special Care Dentistry and Conscious Sedation
36.1 Special Care Dentistry, Risk Stratification and Sedation Principles 36.2 Inhalation Sedation with Nitrous Oxide 36.3 Intravenous Sedation with Midazolam 36.4 Oral Sedation and General Anaesthesia Referral
37 Chapter 37: Dental Public Health
37.1 Delivering Better Oral Health and the Fluoride Toolkit 37.2 Oral Health Epidemiology and Indices 37.3 Inequalities, Water Fluoridation and Population Prevention 37.4 NHS Dental Services, Access and Commissioning
38 Chapter 38: Communication and Interpersonal Skills
38.1 Patient Communication and Shared Decision-Making 38.2 Breaking Bad News, Complaints and the Duty of Candour 38.3 Referrals, Records and Communication with the Team
39 Chapter 39: Consent and Capacity
39.1 Valid Consent and the Montgomery Standard 39.2 The Mental Capacity Act 2005 39.3 Best Interests Decisions and Lasting Power of Attorney 39.4 Consent in Children and Young People 39.5 Safeguarding Children and Vulnerable Adults 39.6 Confidentiality, Data Protection and Lawful Disclosure
40 Chapter 40: Clinical Professionalism and the GDC
40.1 The General Dental Council and Standards Principles 1 to 4 40.2 GDC Standards: Principles 5 to 9 40.3 The GDC Fitness to Practise Process 40.4 Clinical Governance and the Audit Cycle
41 Chapter 41: Health and Safety Law in Dental Practice
41.1 Health and Safety Legislation, COSHH, RIDDOR and Sharps
42 Chapter 42: Self-Management and Professional Development
42.1 Enhanced CPD, Lifelong Learning and Reflective Practice 42.2 Managing Time, Stress and Clinical Wellbeing 42.3 Leadership, Delegation and Practice Management
26.1 Removable Partial Dentures: Classification, Design and Surveying
Key Takeaways Explain This Topic AI
Applegate's rules require classification after extractions, from the most posterior edentulous area, with remaining areas counted as modification spaces.
A lingual bar requires at least 7.0 to 8.0 mm of functional sulcus depth, comprising a 3.0 to 4.0 mm bar plus 3.0 to 4.0 mm of clearance from the gingival margin.
Maxillary major connectors must be at least 6.0 mm clear of the gingival margins.
Occlusal rests are about one-third the buccolingual width, 1.0 to 1.5 mm deep, with an angle to the minor connector of less than 90 degrees so that force is directed along the long axis.
Undercut gauges of 0.25, 0.50 and 0.75 mm identify the depth of undercut available, and cast cobalt-chromium clasps typically engage 0.25 mm.
Last updated: September 2026
1. Removable Partial Dentures: Kennedy Classification & Applegate's Rules
The Kennedy Classification categorises partially edentulous arches based on the anatomical distribution of edentulous saddles relative to remaining abutment teeth. Kennedy Classification Architecture
- Class I: Bilateral free-end distal extension saddles
- Class II: Unilateral free-end distal extension saddle
- Class III: Unilateral bounded saddle (anterior & posterior abutments)
- Class IV: Single bilateral bounded anterior saddle crossing the midline
- Applegate's 8 Rules of Application
To eliminate diagnostic ambiguity, Applegate established eight definitive rules:
Rule 1: Classification should follow, rather than precede, extractions of teeth that might alter the definitive classification.
Rule 2: If a third molar is missing and is not to be replaced, it is not considered in the classification.
Rule 3: If a third molar is present and is to be used as an abutment, it is considered in the classification.
Rule 4: If a second molar is missing and is not to be replaced (e.g., opposing second molar is also missing), it is not considered in the classification.
Rule 5: The most posterior edentulous area (or areas) always determines the primary classification.
Rule 6: Edentulous areas other than those determining the primary classification are designated as modifications and are identified by their number.
Rule 7: The extent of the modification is not considered , only the number of discrete additional edentulous spaces.
Rule 8: There can be no modification spaces in Class IV . (Any additional posterior space would immediately become the primary classification under Rule 5, turning the case into a Class I, II, or III with an anterior modification).
2. RPD Component Design and Biomechanics
An RPD framework comprises major connectors, minor connectors, rests, direct retainers (clasps), indirect retainers, and denture saddles. RPD Framework Mechanical Architecture
- ┌────────────────────────────────────────────────────────┐
- │ Major Connector │
- │ (Rigidity, Cross-Arch Stability, Mucosal Clearance) │
- └───────┬────────────────────────┬───────────────┬───────┘
- │ │ │
- Rest Seats Clasp Assembly Guiding Plates
- (Vertical Support) (Direct Retention) (Reciprocity/Path)
- │ │
- Axial Transmission Retentive vs Reciprocal
- Spoon-shaped < 90° Terminal 1/3 Undercut
- Major Connectors
The major connector unifies all components, transferring masticatory forces across the dental arch.
Mandibular Major Connectors:
Lingual Bar: Half-pear shaped cross-section. Requires a minimum of 7.0–8.0 mm functional vertical depth of the lingual sulcus (measured from the active floor of the mouth during tongue elevation to the lingual gingival margin). This accommodates a 3.0–4.0 mm bar height plus a mandatory 3.0–4.0 mm biological clearance below the marginal gingiva.
Lingual Plate (Apron): Covers the lingual gingival tissues and extends up onto the cingula of anterior teeth with a scalloped margin. Indications: Functional lingual sulcus depth < 7.0 mm; anticipated loss of anterior teeth (permits addition of prosthetic teeth to the plate); or presence of large mandibular tori. Must have terminal rests on canine/premolar teeth to prevent acting as an orthodontic wedge.
Sublingual Bar: Placed horizontally on the floor of the mouth when sulcus height is compromised.
Maxillary Major Connectors:
Must maintain a minimum of 6.0 mm clearance from the marginal gingiva to avoid gingival strangulation, or cover the palate fully.
Palatal Strap: Broad, thin band (> 8.0 mm wide); exceptionally comfortable; ideal for Class III bounded saddles.
Anterior-Posterior Palatal Strap: Combines an anterior and posterior strap around an open central palatal window. Maximally rigid; ideal for Class I and II cases, especially in the presence of a palatal torus.
Horseshoe (U-shaped): Runs along the lingual slope of the alveolar ridge. Least rigid maxillary connector; flexes under lateral loading. Indicated solely when a large, inoperable palatal torus extends to the junction of the hard and soft palates .
Full Palatal Plate: Completely covers the hard palate. Provides maximum mucosal support and retention; indicated for Kennedy Class I cases with severe alveolar bone resorption or compromised abutments.
Rests and Rest Seats
Primary Mechanical Role: Provides vertical support . Prevents gingival displacement of the denture base into soft tissues, preventing damage to the periodontal apparatus, while transmitting vertical occlusal forces down the long axis of the abutment.
Occlusal Rest Specifications:
- Spoon-shaped / saucer-shaped with rounded line angles;
- Width: One-third the bucco-lingual width of the tooth (or half the intercuspal distance);
- Length: Extends one-third the mesio-distal length of the occlusal table;
- Marginal Ridge Reduction: Lowered by 1.0–1.5 mm to prevent occlusal interference and metal fracture;
Angle: The angle between the floor of the rest seat and the vertical minor connector must be less than 90° (acute angle). An angle ≥ 90° allows the rest to slide off under masticatory load, acting as an orthodontic wedge that tips the tooth.
Cingulum Rest Specifications: Prepared predominantly on maxillary canines. Formed as an inverted 'V' or 'U' shelf in enamel at the junction of the gingival and middle thirds of the lingual surface. Directs forces vertically down the long axis.
Incisal Rest: V-shaped notch carved into incisal angles; mechanically inferior due to an extended lever arm that generates tipping moments; aesthetically poor.
- Direct Retainers (Clasp Assemblies) Circumferential (Akers) Clasp Assembly Mechanics
- Occlusal Table
- ┌─────────┐
- Rest ───────┤ ├────── Minor Connector
- └────┬────┘
- Rigid Reciprocal │ Flexible Retentive Arm
- Arm (Above Line) │ (Terminal 1/3 Engages Undercut)
- ─────────────┼───────────── Survey Line (Height of Contour)
- │ 0.25 mm Cast Co-Cr
- │ (0.50 mm Wrought Wire)
Suprabulge (Circumferential / Akers) Clasps: Approach the retentive undercut from above the survey line (occlusal approach). Extremely versatile for tooth-supported bounded saddles (Class III).
Infrabulge (Roach / Bar / I-bar) Clasps: Approach the retentive undercut from below the survey line (gingival approach from the denture base). Aesthetically superior, less tooth coverage. Contraindicated in the presence of deep tissue undercuts (> 2.0 mm), shallow buccal sulcus (< 3.0 mm), or high frenal attachments.
Clasp Assembly Components:
Retentive Arm: Tapered along its length to provide flexibility. Only the terminal third crosses the survey line into the retentive undercut. Engages a 0.25 mm (0.010 inch) undercut for cast cobalt-chromium , or 0.50 mm for flexible wrought wire .
Reciprocal (Stabilizing) Arm: Uniformly rigid, non-tapered arm placed above the survey line on the opposite side of the tooth. Must contact the tooth before the retentive arm flexes over the height of contour during seating and unseating. Counteracts the lateral horizontal displacing force exerted by the flexing retentive arm.
The RPI System (Krol / Kratochvil Design):
Designed specifically for distal extension saddles (Kennedy Class I and II) to avoid damaging torque on abutments:
R (Rest): Mesial occlusal rest (moves the fulcrum anteriorly; downward load causes the clasp to disengage apically into the undercut rather than torquing the tooth);
P (Proximal Plate): Prepared on the distal guide plane, relieved gingivally;
I (I-bar): Positioned on the facial height of contour or slightly mesial in a 0.25 mm undercut. Disengages into the gingival vestibule under functional loading.
Indirect Retention
In distal extension dentures (Kennedy Class I and II), the denture base rests on compressible mucosa. While occlusal forces push the saddle towards the ridge, sticky foods lift the saddle away from the ridge.
The Fulcrum Axis: Under sticky lifting forces, the denture rotates around an imaginary fulcrum line passing through the most posterior rest seats .
Indirect Retainer Mechanism: An indirect retainer is a rest placed as far anteriorly and perpendicular to the fulcrum line as possible (typically on canines or first premolars). By seating into an anterior rest seat, it acts as a Class II lever stop, neutralizing the rotational displacement of the posterior distal extension saddle away from the residual ridge.
3. Principles of Dental Surveying
Dental surveying is the diagnostic analysis of the spatial parallelism of dental casts using a surveyor. Dental Surveying Protocol
1. Analyzing Rod: Determine path of insertion & evaluate tilt.
2. Carbon Marker: Scribe survey line (height of contour).
3. Undercut Gauges: Identify precise retention (0.25, 0.50, 0.75 mm).
4. Enamel Preparation: Carve parallel guide planes & rest seats.
Path of Insertion: The single definitive path along which the prosthesis moves from its first point of tooth contact to its fully seated position. Typically oriented perpendicular to the occlusal plane, with minor tilts to balance undercuts.
Survey Line: Represents the height of contour—the greatest circumference of the tooth at a given horizontal cast tilt. Divides the tooth into a suprabulge area (non-retentive) and an infrabulge area (retentive undercut).
Undercut Gauges: Measure precise horizontal depth:
- 0.25 mm (0.010 in): Cast cobalt-chromium clasps;
- 0.50 mm (0.020 in): Wrought wire or cast gold clasps;
0.75 mm (0.030 in): Highly flexible wrought alloys.
Guide Planes: Parallel vertical surfaces prepared on the proximal and axial tooth surfaces facing edentulous spaces. Guide planes ensure a smooth, single path of insertion, enhance frictional retention, provide reciprocity, and eliminate unsightly food traps under minor connectors.