Study guide
1.1 The IPAF MEWP Operator Course, Theory Test & PAL Card
IPAF MEWP Operator PAL Card
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: The IPAF MEWP Operator Course & PAL Card
1.1 The IPAF MEWP Operator Course, Theory Test & PAL Card
2 Chapter 2: UK Health, Safety & Statutory Regulations
2.1 Health and Safety at Work etc. Act 1974 (HASAWA) 2.2 Lifting Operations and Lifting Equipment Regulations 1998 (LOLER) 2.3 Provision and Use of Work Equipment Regulations 1998 (PUWER) 2.4 Work at Height Regulations 2005 (WAHR) & Hierarchy of Control
3 Chapter 3: British Standards, Design Classifications & Kinematics
3.1 BS 8460:2025 Code of Practice & the User's Responsibilities 3.2 BS EN 280-1 & ISO 16368 Design Groups (A and B) 3.3 Travel Types (Type 1, Type 2, Type 3) & IPAF Categories
4 Chapter 4: MEWP Categories, Machine Selection & Specifications
4.1 Static Platforms: Category 1a (Static Vertical) and Category 1b (Static Boom) 4.2 Mobile Platforms: Category 3a (Mobile Vertical) and Category 3b (Mobile Boom) 4.3 IPAF Categories, PAVs, Specialist Units & MEWP Selection
5 Chapter 5: Pre-Use Inspections & Daily Maintenance
5.1 Walk-Around Visual Inspection Protocol 5.2 Running Gear, Wheels & Tyre Management 5.3 Documentation, Operator Manuals & Daily Logbook Records
6 Chapter 6: Safety Systems, Controls & Emergency Lowering
6.1 Dual Control Station Operation & Interlocks 6.2 Load Sensing, Tilt Alarms & Anti-Entrapment Devices 6.3 Emergency Descent Systems & Defect Quarantine
7 Chapter 7: Ground Assessment, Outriggers & Stability Physics
7.1 Ground Bearing Capacity & Subsurface Hazards 7.2 Spreader Plates, Outrigger Mats & Setup 7.3 Platform Loading, Centre of Gravity & Dynamic Forces
8 Chapter 8: Environmental Hazards, Overhead Clearances & Safe Operations
8.1 Wind Speed Dynamics & Adverse Weather 8.2 Overhead Power Lines & HSE GS6 8.3 Manoeuvring, Travelling & Collision Avoidance 8.4 Parking, Securing & Transporting MEWPs, and Other Site Hazards
9 Chapter 9: Fall Protection, Catapult Effect & Emergency Rescue
9.1 Fall Protection Policy & IPAF Technical Guidance H1 9.2 PFPE Inspection, Anchor Points & Catapult Physics 9.3 Recovery & Rescue Planning and Suspension Trauma
1.1 The IPAF MEWP Operator Course, Theory Test & PAL Card
Key Takeaways Explain This Topic AI
The IPAF MEWP Operator course has a theory section and theory test followed by practical training and a practical test, and lasts one to three days depending on experience and categories.
IPAF does not publish the number of theory questions, the pass mark or a time limit; training centres describe a multiple-choice paper.
Failing the theory test means re-sitting the entire course on another day; a failed practical can be retaken within 90 days of passing the theory test.
The PAL Card is issued digitally through IPAF's ePAL app and is normally valid for 5 years.
IPAF's MEWP Operator training is certified as conforming to ISO 18878, the international standard for MEWP operator training.
Last updated: October 2026
The IPAF MEWP Operator Course, Theory Test & PAL Card
Quick Answer: The IPAF MEWP Operator course is an entry-level course delivered only by IPAF Approved Training Centres . It has a theory section and theory test , followed by practical training and a practical test on each machine category, and lasts one to three days . Successful candidates receive a Powered Access Licence (PAL Card) , issued digitally through the ePAL app and normally valid for 5 years . IPAF does not publish the number of theory questions, the pass mark or a time limit, so check the format with your training centre.
The International Powered Access Federation ( IPAF ) is a not-for-profit federation owned by its members—manufacturers, rental companies, contractors and users of powered access. IPAF does not deliver training itself: courses are run by more than 845 audited IPAF Approved Training Centres in over 80 countries. IPAF's MEWP Operator training is certified by Bureau Veritas as conforming to ISO 18878 , the international standard for MEWP operator training (now in its 2025 third edition).
Who the Course Is For
The course is for anyone who needs to operate a MEWP in any machine category, and IPAF notes that anyone who may need to supervise or rescue an operator also benefits from it. It is an entry-level course: no previous MEWP experience is required, although inexperience can lengthen the course or reduce the chance of passing. Training centres normally require candidates to be at least 16 years old , able to read and understand safety notices and the operator's manual, and fit enough to work at height.
How the Course Is Structured
Stage What happens
Theory section Taken in person at the training centre, by eLearning (around three hours, at your own pace) or virtually using meeting software such as Zoom or Teams
Theory test Taken at the training centre; you must pass it before the practical test
Practical training Hands-on operation of your chosen categories under an IPAF instructor, at the centre or a suitable site
Practical test Assessment of pre-use inspection, harness use, set-up and safe operation on each category
The course lasts one to three days (a day is at least seven hours), depending on your experience, the complexity of the machines and the number of category modules. For basic machines, candidates can generally complete two categories, such as 3A and 3B, in about a day.
What the Course Covers
IPAF's course leaflet lists these topics:
- pre-use checks and machine familiarisation;
- basic harness selection and pre-use checks;
- modular, category-specific training on machine features, mechanisms and controls;
- safe MEWP operations;
- work-site inspections;
key hazards and how to control them.
ISO 18878:2025 adds a minimum list for theory training. It includes operator responsibilities, how and when to inspect the worksite, selecting a suitable MEWP, the operator's manual and its weather-resistant storage, pre-start inspection, factors affecting stability, hazard recognition, platform, ground and auxiliary lowering controls, dealing with malfunctions, PPE, safe travel, transport, securing the MEWP against unauthorised use, familiarisation, regulations, checking that inspections are current, wind and weather, authorisation, hazardous locations, warnings on the machine and high-pressure systems. The chapters of this guide follow that list.
The Theory Test: What Is and Is Not Published
IPAF publishes how the course works, but it does not publish the number of theory questions, the pass mark or a time limit. Training centres describe a multiple-choice theory paper (often reported as around 30 questions, and some centres run it open-book), but those are centre descriptions, not IPAF figures. Ask your training centre how its test is run, and prepare to understand the topics rather than memorise answers.
Results, Retakes and Time Limits Between Tests
Theory test failed : you must re-sit the entire course on another day. IPAF allows a retake as early as the next day, but recommends that you, your employer and the instructor first discuss why you failed.
Theory passed, practical failed : you must retake the practical test within 90 days of passing the theory test; after that, you must re-sit and pass the theory test first.
Delayed practical : practical tests that do not follow the theory test straight away are normally taken within the following four weeks, extended to 90 days where the practical was rescheduled because of poor weather or similar reasons.
The PAL Card and ePAL
On successful completion you receive the PAL Card (Powered Access Licence) and certificate through ePAL , IPAF's operator app; a printed card can still be ordered through the training centre. The card shows the categories you passed—Static Vertical (1A), Static Boom (1B), Mobile Vertical (3A), Mobile Boom (3B), Push Around Vertical (PAV) or Special—with a + (for example 3B+) if you later complete PAL+ advanced training. Key facts:
Validity : normally 5 years ; some countries or regions use a different period.
Renewal : a shorter renewal course is available, but only before the card expires and only for operators who have kept their log book (from 1 January 2026, at least 60 entries over 5 years). An expired card means taking the full course again (Section 5.3).
UK construction sites : IPAF can add the CSCS logo to the PAL Card for operators who have passed the CITB Health, Safety and Environment test within the two years before applying.
Verification : any IPAF licence can be checked online with IPAF's PAL Card verification service.
Important
A PAL Card proves you were trained and tested on a category . It does not authorise you to use every machine. Before operating an unfamiliar make or model you still need familiarisation (IPAF technical guidance F1), and your employer must authorise you to use the machine on that site.
Loading diagram...