Study guide

4.3 Chain Sling Marking, Certification & Safe Use

LEEA Foundation Certificate Lifting Equipment Engineers Association, UK

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

About the LEEA Foundation Certificate The LEEA Qualification Pathway, Diplomas & the TEAM Card

2 Legislation, Standards & Regulatory Framework

1.1 Health and Safety at Work etc. Act 1974 & Management Regulations 1.2 Provision and Use of Work Equipment Regulations 1998 (PUWER 1998) 1.3 Lifting Operations and Lifting Equipment Regulations 1998 (LOLER 1998) 1.4 Standards, Marking & Documentation 1.5 Controlling Risks, Hazard Management & the 5-Step Risk Assessment

3 Principles of Mechanics & Material Properties

2.1 Forces, Mass, Weight & Center of Gravity 2.2 Mechanical Properties: Stress, Strain & Safety Factors 2.3 WLL, SWL & Rating Concepts 2.4 Heat Treatment & Metallurgy in Lifting Equipment 2.5 Units of Measure, Symbols & Conversions 2.6 Basic Machines, Mechanical Advantage, Velocity Ratio & Efficiency 2.7 Verification, Test Machines, Calibration & NDT Methods

4 Shackles, Eyebolts & Threaded Fittings

3.1 Shackles: Types, Standards & Rating 3.2 Shackle Inspection, Safe Use & Rejection Criteria 3.3 Eyebolts & Eyenuts: Types & Angular Loading 3.4 Eyebolt Installation, Inspection & Rejection Criteria 3.5 Rigging Screws & Turnbuckles

5 Chain Slings & Components

4.1 Chain Sling Construction & Grades 4.2 Chain Components: Master Links, Hooks & Couplers 4.3 Chain Sling Marking, Certification & Safe Use 4.4 Chain Sling Inspection, Wear & Rejection Criteria

6 Wire Rope Slings & Terminations

5.1 Wire Rope Construction & Cores 5.2 Wire Rope Terminations & Assemblies 5.3 Wire Rope Sling Ratings & Safe Use 5.4 Wire Rope Sling Inspection & Discard Criteria

7 Textile Slings & Below-the-Hook Accessories

6.1 Flat Woven Webbing Slings 6.2 Roundslings & High-Performance Fiber Slings 6.3 Textile Sling Inspection, Chemical & Mechanical Damage 6.4 Plate Clamps, Beam Clamps & Below-the-Hook Lifters 6.5 Fibre Rope Slings & Natural Fibre Ropes 6.6 Crane Forks & C-Hooks

8 Manual & Powered Lifting Appliances

7.1 Manual Chain Blocks & Lever Hoists 7.2 Wire Rope Pull-Lifts, Winches & Jacks 7.3 Powered Hoists: Electric & Pneumatic 7.4 Cranes, Structures & Supporting Equipment 7.5 Mobile Cranes, Tower Cranes & Offshore Cranes 7.6 Offshore Containers, Pad Eyes & Lifting Sets

9 Rigging Calculations, Mode Factors & Complex Lifts

8.1 Uniform Load Method (ULM) for Multi-Leg Slings 8.2 Trigonometric Method for Multi-Leg Slings 8.3 Hitch Mode Factors: Choked, Basket & Wrap Hitches 8.4 Center of Gravity Off-Center & Asymmetric Load Calculations

4.3 Chain Sling Marking, Certification & Safe Use

Key Takeaways Explain This Topic AI

Every chain sling must be fitted with a durable, metallic identification tag detailing WLL, nominal chain size, number of legs, manufacturer mark, serial number, and compliance symbols (CE/UKCA).

Mode factors derate chain sling capacity based on leg angle: for 2-leg slings, the mode factor is 1.4 for 0°--45° to vertical (0°--90° included angle) and 1.0 for 45°--60° to vertical (90°--120° included angle); angles above 60° to vertical (120° included angle) are strictly prohibited.

Choke hitch applications derate a chain sling's WLL by a factor of 0.8 (20% reduction) due to local link bending and friction around the load.

Statutory regulations (LOLER 1998 in the UK) require an EC Declaration of Conformity / Initial Test Certificate upon commissioning and mandatory Thorough Examinations by a Competent Person at least every 6 months.

Last updated: August 2026

4.3 Chain Sling Marking, Certification & Safe Use

The safe operation of chain slings in industrial lifting depends on strict compliance with statutory marking requirements, precise load rating calculations, and sound rigging practices. Riggers and lifting inspectors must accurately determine the Working Load Limit (WLL) of multi-leg slings across varying leg angles and reeving modes. Operating a chain sling beyond its rated capacity or outside permitted angular boundaries risks sudden structural failure.

1. Statutory Identification & Tagging (BS EN 818-4 / LEEA)

In accordance with BS EN 818-4 and LEEA codes of practice, every chain sling assembly must be permanently fitted with a heavy-duty, metallic identification tag (typically stainless steel or brass) attached to the master link. +-------------------------------------------------------------+

  • | ACME LIFTING SERVICES |
  • | Serial No: CS-884920 Grade: 8 (T) |
  • | Chain Size: 10 mm Legs: 2 |
  • | --------------------------------------------------------- |
  • | WLL 0°-45° (to vert) / 0°-90° (inc): 4.25 t |
  • | WLL 45°-60° (to vert) / 90°-120° (inc): 3.00 t |
  • | --------------------------------------------------------- |
  • | CE UKCA Year: 2026 |
  • +-------------------------------------------------------------+
  • Mandatory Tag Information

Working Load Limit (WLL): Stated clearly in tonnes ( t t t ) or kilograms ( k g kg k g ). For multi-leg slings, the tag MUST show the WLL for both standard angular ranges ( 0 ∘ – 45 ∘ 0^\circ\text{--}45^\circ 0 ∘ – 4 5 ∘ and 45 ∘ – 60 ∘ 45^\circ\text{--}60^\circ 4 5 ∘ – 6 0 ∘ to the vertical).

Nominal Chain Size ( d d d ): Nominal wire diameter in millimeters (e.g., 10 mm 10\text{ mm} 10 mm ).

Number of Legs: Total count of active lifting legs ( 1 1 1 , 2 2 2 , 3 3 3 , or 4 4 4 ).

Grade Identification: Metal grade number or letter (e.g., 8 / T for Grade 80; 10 / V for Grade 100).

Manufacturer Identification: Mark, symbol, or full name of the certified sling assembler.

Unique Serial / Identification Number: Traceable link to the manufacturer's test certificate and inspection register.

Regulatory Compliance Marks: CE and/or UKCA marking.

Tag Shape Conventions

Grade 8 Slings: Industry standard convention utilizes an octagonal (8-sided) metal tag.

Grade 10 Slings: Industry standard convention utilizes a 10-sided metal tag, providing immediate visual differentiation for riggers on site.

2. Load Rating Calculations & Mode Factors

When a multi-leg sling lifts a load, the tension in each sling leg increases as the angle between the leg and the vertical increases. The European standard BS EN 818-4 enforces the Uniform Load Method for rating multi-leg slings. SLING LEG ANGLES TO VERTICAL

  • [0° - 45° to Vert] [45° - 60° to Vert]
  • (0°-90° Included) (90°-120° Included)
  • Mode Factor = 1.4 Mode Factor = 1.0
  • / \ / \
  • / β1 \ / β2 \
  • / \ / \
  • / \ / \
  • [ LOAD ] [ LOAD ]
  • Multi-Leg Mode Factors (BS EN 818-4 Uniform Load Method)

Sling Configuration Angle to Vertical ( β \beta β ) Included Angle ( α = 2 β \alpha = 2\beta α = 2 β ) Mode Factor ( F F F ) relative to Single Leg WLL

Single Leg (Straight Pull) 0 ∘ 0^\circ 0 ∘ 0 ∘ 0^\circ 0 ∘ 1.0 1.0 1.0

2-Leg Sling 0 ∘ – 45 ∘ 0^\circ\text{--}45^\circ 0 ∘ – 4 5 ∘ 0 ∘ – 90 ∘ 0^\circ\text{--}90^\circ 0 ∘ – 9 0 ∘ 1.4 1.4 1.4 ( W L L = 1.4 × W L L single WLL = 1.4 \times WLL_{\text{single}} W LL = 1.4 × W L L single ​ )

2-Leg Sling 45 ∘ – 60 ∘ 45^\circ\text{--}60^\circ 4 5 ∘ – 6 0 ∘ 90 ∘ – 120 ∘ 90^\circ\text{--}120^\circ 9 0 ∘ – 12 0 ∘ 1.0 1.0 1.0 ( W L L = 1.0 × W L L single WLL = 1.0 \times WLL_{\text{single}} W LL = 1.0 × W L L single ​ )

3 & 4-Leg Sling 0 ∘ – 45 ∘ 0^\circ\text{--}45^\circ 0 ∘ – 4 5 ∘ 0 ∘ – 90 ∘ 0^\circ\text{--}90^\circ 0 ∘ – 9 0 ∘ 2.1 2.1 2.1 ( W L L = 2.1 × W L L single WLL = 2.1 \times WLL_{\text{single}} W LL = 2.1 × W L L single ​ )

3 & 4-Leg Sling 45 ∘ – 60 ∘ 45^\circ\text{--}60^\circ 4 5 ∘ – 6 0 ∘ 90 ∘ – 120 ∘ 90^\circ\text{--}120^\circ 9 0 ∘ – 12 0 ∘ 1.5 1.5 1.5 ( W L L = 1.5 × W L L single WLL = 1.5 \times WLL_{\text{single}} W LL = 1.5 × W L L single ​ )

Any Sling Angle > 60 ∘ > 60^\circ > 6 0 ∘ to Vert > 120 ∘ > 120^\circ > 12 0 ∘ Included PROHIBITED (Extreme Overload Hazard)

Engineering Physics of 3 and 4-Leg Rating ( F = 2.1 F = 2.1 F = 2.1 )

Why is a 4-leg sling rated at only 2.1 × Single Leg WLL 2.1 \times \text{Single Leg WLL} 2.1 × Single Leg WLL rather than 4.0 × Single Leg WLL 4.0 \times \text{Single Leg WLL} 4.0 × Single Leg WLL ?

In practical lifting, unless a load is completely flexible or the sling legs are fitted with automatic load-equalizing sheaves, a rigid load will almost always be supported primarily by only three legs (or even two legs diagonally). The fourth leg merely acts to balance the load. Therefore, international standards restrict 3 & 4-leg mode factors to 2.1 2.1 2.1 (for 0 ∘ – 45 ∘ 0^\circ\text{--}45^\circ 0 ∘ – 4 5 ∘ ), protecting against uneven load distribution.

Sample Calculation

Problem: A Grade 8 single leg chain of 10 mm 10\text{ mm} 10 mm size has a W L L single = 3.15 tonnes WLL_{\text{single}} = 3.15 \text{ tonnes} W L L single ​ = 3.15 tonnes . Calculate the maximum safe lifting capacity for a 2-leg sling and a 4-leg sling of this same chain size operating at an angle of 30 ∘ 30^\circ 3 0 ∘ to the vertical.

2-Leg Sling Capacity ( 0 ∘ – 45 ∘ 0^\circ\text{--}45^\circ 0 ∘ – 4 5 ∘ ): W L L = 1.4 × 3.15 t = 4.41 tonnes ( stamped as 4.25 t under rounded standard tables ) WLL = 1.4 \times 3.15 \text{ t} = 4.41 \text{ tonnes} \quad (\text{stamped as } 4.25\text{t under rounded standard tables}) W LL = 1.4 × 3.15 t = 4.41 tonnes ( stamped as 4.25 t under rounded standard tables )

4-Leg Sling Capacity ( 0 ∘ – 45 ∘ 0^\circ\text{--}45^\circ 0 ∘ – 4 5 ∘ ): W L L = 2.1 × 3.15 t = 6.615 tonnes ( stamped as 6.70 t under standard EN tables ) WLL = 2.1 \times 3.15 \text{ t} = 6.615 \text{ tonnes} \quad (\text{stamped as } 6.70\text{t under standard EN tables}) W LL = 2.1 × 3.15 t = 6.615 tonnes ( stamped as 6.70 t under standard EN tables )

3. Choke Hitch & Special Rigging Configurations

When a chain sling is wrapped directly around a load and hooked back onto its own standing leg (or passed through a master link eye), it forms a choke hitch . STRAIGHT LIFT CHOKE HITCH

  • (Mode Factor 1.0) (Mode Factor 0.8)
  • | |
  • | |
  • | |
  • ( ) ( ) <-- Bending & Friction
  • | // \ at Choke Point
  • [LOAD] //===\
  • [ LOAD ]
  • Choke Hitch Derating Factor ( F choke = 0.8 F_{\text{choke}} = 0.8 F choke ​ = 0.8 )

Rigging a chain sling in choke hitch subjects the chain link at the choke point to intense localized bending, shear, and interlink friction. To compensate, the rated WLL of the sling must be multiplied by a choke mode factor of 0.8 (a 20% capacity derating) : W L L choked = W L L straight × 0.8 WLL_{\text{choked}} = WLL_{\text{straight}} \times 0.8 W L L choked ​ = W L L straight ​ × 0.8

Edge Protection & Sharp Radii

When chain slings are wrapped around structural steel sections, machinery bases, or sharp concrete edges, the corner radius r r r of the load must be compared to the nominal chain diameter d d d :

If r ≥ 2 d r \ge 2d r ≥ 2 d : Full WLL applies (no edge derating required).

If r < 2 d r < 2d r < 2 d : Corner protection is mandatory. Approved wooden packing, rubber edge guards, or specialized polyurethane corner protectors must be fitted to prevent sharp metal edges from biting into chain links and causing severe link bending.

Pre-Use Tag-to-Lift Cross-Check

Before connecting a chain sling, compare the tag with the planned configuration in a fixed order: identity and grade; number of legs; single-leg or assembly WLL; angle band; hitch or shortening arrangement; component compatibility; and any temperature or environmental derating. Then inspect the links, master link, connectors, shortening clutch and hooks. A valid tag does not make a damaged sling usable, and an undamaged sling without traceable capacity information is not ready for service. Raise the load only just clear, stop, and confirm balance, seating and load sharing before continuing.

Loading diagram... Multi-Leg Chain Sling Angle Derating & Tension Vectors