Study guide
The LEEA Qualification Pathway, Diplomas & the TEAM Card
LEEA Foundation Certificate Lifting Equipment Engineers Association, UK
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
About the LEEA Foundation Certificate The LEEA Qualification Pathway, Diplomas & the TEAM Card
2 Legislation, Standards & Regulatory Framework
1.1 Health and Safety at Work etc. Act 1974 & Management Regulations 1.2 Provision and Use of Work Equipment Regulations 1998 (PUWER 1998) 1.3 Lifting Operations and Lifting Equipment Regulations 1998 (LOLER 1998) 1.4 Standards, Marking & Documentation 1.5 Controlling Risks, Hazard Management & the 5-Step Risk Assessment
3 Principles of Mechanics & Material Properties
2.1 Forces, Mass, Weight & Center of Gravity 2.2 Mechanical Properties: Stress, Strain & Safety Factors 2.3 WLL, SWL & Rating Concepts 2.4 Heat Treatment & Metallurgy in Lifting Equipment 2.5 Units of Measure, Symbols & Conversions 2.6 Basic Machines, Mechanical Advantage, Velocity Ratio & Efficiency 2.7 Verification, Test Machines, Calibration & NDT Methods
4 Shackles, Eyebolts & Threaded Fittings
3.1 Shackles: Types, Standards & Rating 3.2 Shackle Inspection, Safe Use & Rejection Criteria 3.3 Eyebolts & Eyenuts: Types & Angular Loading 3.4 Eyebolt Installation, Inspection & Rejection Criteria 3.5 Rigging Screws & Turnbuckles
5 Chain Slings & Components
4.1 Chain Sling Construction & Grades 4.2 Chain Components: Master Links, Hooks & Couplers 4.3 Chain Sling Marking, Certification & Safe Use 4.4 Chain Sling Inspection, Wear & Rejection Criteria
6 Wire Rope Slings & Terminations
5.1 Wire Rope Construction & Cores 5.2 Wire Rope Terminations & Assemblies 5.3 Wire Rope Sling Ratings & Safe Use 5.4 Wire Rope Sling Inspection & Discard Criteria
7 Textile Slings & Below-the-Hook Accessories
6.1 Flat Woven Webbing Slings 6.2 Roundslings & High-Performance Fiber Slings 6.3 Textile Sling Inspection, Chemical & Mechanical Damage 6.4 Plate Clamps, Beam Clamps & Below-the-Hook Lifters 6.5 Fibre Rope Slings & Natural Fibre Ropes 6.6 Crane Forks & C-Hooks
8 Manual & Powered Lifting Appliances
7.1 Manual Chain Blocks & Lever Hoists 7.2 Wire Rope Pull-Lifts, Winches & Jacks 7.3 Powered Hoists: Electric & Pneumatic 7.4 Cranes, Structures & Supporting Equipment 7.5 Mobile Cranes, Tower Cranes & Offshore Cranes 7.6 Offshore Containers, Pad Eyes & Lifting Sets
9 Rigging Calculations, Mode Factors & Complex Lifts
8.1 Uniform Load Method (ULM) for Multi-Leg Slings 8.2 Trigonometric Method for Multi-Leg Slings 8.3 Hitch Mode Factors: Choked, Basket & Wrap Hitches 8.4 Center of Gravity Off-Center & Asymmetric Load Calculations
The LEEA Qualification Pathway, Diplomas & the TEAM Card
Key Takeaways Explain This Topic AI
After passing the Foundation Certificate, learners may study any LEEA Diploma course in any order; there are no tiers or levels, and each Diploma is a standalone qualification of equal value.
LEEA Academy 2.0 Diploma courses include LAC (Lifting Accessories), MLM (Manual Lifting Machines), PLM (Powered Lifting Machines), and BGC (Bridge & Gantry Cranes), with further specialisms such as mobile cranes; the LAC course replaced the legacy Lifting Equipment General (LEG) Diploma.
Foundation and Diploma courses are delivered in Global and regional variants (Australia, New Zealand, USA) and in multiple languages including English, Arabic, Bahasa, Brazilian Portuguese, and Simplified Chinese.
A TEAM Card provides evidence of identity and LEEA qualifications; it is available to Diploma or Advanced Programme holders directly employed by a full LEEA member and remains valid for 3 years.
TEAM Card renewal requires a short online refresher for each qualification; current one-time cards are then updated virtually with the new expiry date.
Last updated: August 2026
The LEEA Qualification Pathway, Diplomas & the TEAM Card
Passing the Foundation Certificate opens the full LEEA Academy structure. Understanding how the pathway is organized helps candidates plan their development and helps employers verify the credentials of the people they appoint to inspect lifting equipment.
1. Diploma Courses: Study in Any Order, Specialize Freely
LEEA's Diploma courses are the technical qualifications of the Academy. Two structural rules shape the pathway:
Foundation first: There is a mandatory requirement to have successfully completed the Foundation Certificate before accessing any Diploma course.
No tiers or levels: Each Diploma is a LEEA qualification in its own right and carries equal value to any other. After the Foundation, a learner may study the Diplomas in any order and go straight to their specialism.
Principal Academy 2.0 Diploma Courses
Course Title / Scope Notes
LAC Lifting Accessories Course Replaced the legacy Lifting Equipment General (LEG) Diploma; covers slings, shackles, eyebolts, clamps and other accessories
- MLM Manual Lifting Machines Chain blocks, lever hoists, jaw winches, jacks
- PLM Powered Lifting Machines Electric, pneumatic, and hydraulic hoists
- BGC Bridge & Gantry Cranes Overhead travelling cranes, gantries, runways, structures
MCE and others Mobile Cranes and further specialisms Regional and equipment-specific Diplomas continue the same pattern
Global & Regional Variants
Academy 2.0 courses are built on a Global core with regional variants where legislation differs—for example FOU (Australia) and regional editions of LAC for Australia, New Zealand, and the USA . Courses are delivered in English, Arabic, Bahasa, Brazilian Portuguese, and Simplified Chinese , with online examinations available in the same languages.
Foundation awareness courses: LEEA also publishes the open-access End User Guidance (EUG) course and the members-only Introduction to Lifting Equipment (ILE) course, both launched on Global Lifting Awareness Day (7 July 2022). These sit below Foundation level and require no assessment commitment.
2. The TEAM Card: Evidence of Current Qualification
A TEAM Card is available to a person who holds a LEEA Diploma or Advanced Programme qualification and is directly employed by a full LEEA member:
What it is: A card that lists the holder's LEEA qualification(s) and validates their currency—an industry-recognized way for employers, clients, and site gatekeepers to confirm that an inspector or examiner holds current LEEA qualifications.
Validity period: 3 years from the initial awarding date.
Revalidation: Every 3 years the holder is invited to complete a short online refresher course in the LEEA eLearning Academy. The refresher provides new information supporting the holder's specific qualification(s) and tests essential underpinning knowledge. On completion, LEEA updates the expiry data virtually on the current one-time-issued card.
Verification: LEEA provides an online card-verification service ("Verify Team Card" at leeaint.com) so third parties can confirm a card is genuine and current.
Why the 3-Year Refresh Matters
Standards, statutes, and best practice change: the refresher cycle ensures a TEAM Card holder's knowledge tracks current documents (for example, revised BS EN standards or updated LEEA technical requirements). An expired card does not prove current competence—duty holders vetting a Competent Person should always check the card's validity date.
The Academy 2.0 eLearning Platform
All Academy 2.0 courses—including the Foundation—are delivered on LEEA's eLearning platform for members, so training can be carried out when learners want, how they want, and for as long as they want . The platform suits any device and offers offline study capability with auto-sync updates when the device reconnects, which matters for site-based learners without reliable connectivity. Classroom and virtual-classroom routes remain available for those who prefer facilitated delivery.
Employer Verification Duties
Because the Foundation Certificate does not itself confer inspection competence, employers building an inspection team should:
Confirm which Diploma(s) a candidate holds, not merely that they "have a LEEA certificate".
Verify the TEAM Card is genuine and in date using LEEA's online verification service.
Confirm the holder's specialism matches the equipment they will examine (for example, a BGC-qualified examiner for overhead cranes, an LAC-qualified examiner for slings and shackles).
Record refresher expiry dates and schedule revalidation before the 3-year deadline.
3. Planning a Typical Route
- Career Target Suggested Route
- Lifting accessories inspector Foundation → LAC Diploma → TEAM Card
- Hoist service technician Foundation → MLM or PLM Diploma → TEAM Card
- Overhead crane examiner Foundation → BGC Diploma → TEAM Card
- Multi-discipline examiner Foundation → multiple Diplomas over time; card lists each qualification
Because the Foundation Certificate is the single gateway into every route, the assessment you are preparing for now is the key that unlocks the entire pathway.