Study guide
2.1 Forces, Mass, Weight & Center of Gravity
LEEA Foundation Certificate Lifting Equipment Engineers Association, UK
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
About the LEEA Foundation Certificate The LEEA Qualification Pathway, Diplomas & the TEAM Card
2 Legislation, Standards & Regulatory Framework
1.1 Health and Safety at Work etc. Act 1974 & Management Regulations 1.2 Provision and Use of Work Equipment Regulations 1998 (PUWER 1998) 1.3 Lifting Operations and Lifting Equipment Regulations 1998 (LOLER 1998) 1.4 Standards, Marking & Documentation 1.5 Controlling Risks, Hazard Management & the 5-Step Risk Assessment
3 Principles of Mechanics & Material Properties
2.1 Forces, Mass, Weight & Center of Gravity 2.2 Mechanical Properties: Stress, Strain & Safety Factors 2.3 WLL, SWL & Rating Concepts 2.4 Heat Treatment & Metallurgy in Lifting Equipment 2.5 Units of Measure, Symbols & Conversions 2.6 Basic Machines, Mechanical Advantage, Velocity Ratio & Efficiency 2.7 Verification, Test Machines, Calibration & NDT Methods
4 Shackles, Eyebolts & Threaded Fittings
3.1 Shackles: Types, Standards & Rating 3.2 Shackle Inspection, Safe Use & Rejection Criteria 3.3 Eyebolts & Eyenuts: Types & Angular Loading 3.4 Eyebolt Installation, Inspection & Rejection Criteria 3.5 Rigging Screws & Turnbuckles
5 Chain Slings & Components
4.1 Chain Sling Construction & Grades 4.2 Chain Components: Master Links, Hooks & Couplers 4.3 Chain Sling Marking, Certification & Safe Use 4.4 Chain Sling Inspection, Wear & Rejection Criteria
6 Wire Rope Slings & Terminations
5.1 Wire Rope Construction & Cores 5.2 Wire Rope Terminations & Assemblies 5.3 Wire Rope Sling Ratings & Safe Use 5.4 Wire Rope Sling Inspection & Discard Criteria
7 Textile Slings & Below-the-Hook Accessories
6.1 Flat Woven Webbing Slings 6.2 Roundslings & High-Performance Fiber Slings 6.3 Textile Sling Inspection, Chemical & Mechanical Damage 6.4 Plate Clamps, Beam Clamps & Below-the-Hook Lifters 6.5 Fibre Rope Slings & Natural Fibre Ropes 6.6 Crane Forks & C-Hooks
8 Manual & Powered Lifting Appliances
7.1 Manual Chain Blocks & Lever Hoists 7.2 Wire Rope Pull-Lifts, Winches & Jacks 7.3 Powered Hoists: Electric & Pneumatic 7.4 Cranes, Structures & Supporting Equipment 7.5 Mobile Cranes, Tower Cranes & Offshore Cranes 7.6 Offshore Containers, Pad Eyes & Lifting Sets
9 Rigging Calculations, Mode Factors & Complex Lifts
8.1 Uniform Load Method (ULM) for Multi-Leg Slings 8.2 Trigonometric Method for Multi-Leg Slings 8.3 Hitch Mode Factors: Choked, Basket & Wrap Hitches 8.4 Center of Gravity Off-Center & Asymmetric Load Calculations
2.1 Forces, Mass, Weight & Center of Gravity
Key Takeaways Explain This Topic AI
Mass is a scalar measure of matter in kilograms (kg) or tonnes (t) and remains constant, whereas Weight is a force vector resulting from gravitational pull ( W = m ⋅ g W = m \cdot g W = m ⋅ g ), measured in Newtons (N) or kilonewtons (kN).
Forces in lifting operations are vector quantities characterized by magnitude, direction, line of action, and point of application; angled slings generate horizontal compressive forces on the load while increasing leg tension.
The Center of Gravity (CoG) is the point through which the total weight of a load acts; a freely suspended load will always pivot until its CoG lies directly below the crane hook point of suspension.
For asymmetric or composite loads, the position of the Center of Gravity must be calculated using the Principle of Moments ( ∑ M = 0 \sum M = 0 ∑ M = 0 ) relative to a reference datum to prevent load tilt, sling slippage, or overloading.
Dynamic forces caused by acceleration, sudden braking, or snatch loading significantly amplify the effective load weight beyond static values, imposing peak impact forces on rigging equipment.
Last updated: August 2026
Forces, Mass, Weight & Center of Gravity
Every lifting operation—from hoisting a simple pallet with an overhead crane to orchestrating a multi-crane tandem lift of a 500-tonne offshore module—is governed by the fundamental laws of classical mechanics. For a lifting equipment engineer, inspector, or rigging supervisor, understanding forces, mass, weight, moments, and center of gravity is not merely theoretical knowledge; it is a critical safety imperative. Miscalculating a load's mass or misjudging its center of gravity leads directly to unstable lifts, angled hoisting, structural overload, sling slippage, and catastrophic drop accidents.
1. Mass vs. Weight: Definitions and Units
In everyday language, the terms "mass" and "weight" are frequently used interchangeably. However, in engineering mechanics and LEEA standards, they represent distinct physical concepts with different units and implications for lifting gear.
Mass ( m m m )
Mass is the scalar quantity of matter contained within a physical body. It represents the body's inertia—its resistance to changes in state of motion.
SI Unit: Kilogram (kg)
Industrial Units: Tonne (t), where 1 tonne = 1 , 000 kg 1\text{ tonne} = 1,000\text{ kg} 1 tonne = 1 , 000 kg .
Invariance: A load with a mass of 5 , 000 kg 5,000\text{ kg} 5 , 000 kg maintains a mass of 5 , 000 kg 5,000\text{ kg} 5 , 000 kg whether it is located at sea level, on top of Mount Everest, or on the Moon.
Weight ( W W W )
Weight is a vector force exerted on a mass by a gravitational field. It has both magnitude and direction (acting vertically downwards toward the center of the Earth).
SI Unit: Newton (N) or Kilonewton (kN), where 1 kN = 1 , 000 N 1\text{ kN} = 1,000\text{ N} 1 kN = 1 , 000 N .
Formula: W = m ⋅ g W = m \cdot g W = m ⋅ g Where:
- W W W = Weight force (N or kN)
- m m m = Mass (kg or tonnes)
g g g = Acceleration due to gravity (standard earth gravity g = 9.81 m/s 2 g = 9.81\text{ m/s}^2 g = 9.81 m/s 2 or 9.81 N/kg 9.81\text{ N/kg} 9.81 N/kg )
Practical Conversion in Lifting Operations
To convert a load's mass into the gravitational weight force acting on the crane hook:
For a 1 tonne (1,000 kg) load: W = 1 , 000 kg × 9.81 m/s 2 = 9 , 810 N = 9.81 kN W = 1,000\text{ kg} \times 9.81\text{ m/s}^2 = 9,810\text{ N} = 9.81\text{ kN} W = 1 , 000 kg × 9.81 m/s 2 = 9 , 810 N = 9.81 kN
For field estimation, engineers sometimes use g ≈ 10 m/s 2 g \approx 10\text{ m/s}^2 g ≈ 10 m/s 2 ( 1 tonne ≈ 10 kN 1\text{ tonne} \approx 10\text{ kN} 1 tonne ≈ 10 kN ), but rigging calculations and formal lifting plans must always utilize g = 9.81 m/s 2 g = 9.81\text{ m/s}^2 g = 9.81 m/s 2 to maintain engineering accuracy.
Quantity Symbol SI Unit Dimensional Nature Constant or Variable?
Mass m m m Kilogram (kg) or Tonne (t) Scalar (Magnitude only) Constant regardless of location
Weight W W W Newton (N) or Kilonewton (kN) Vector (Magnitude & Vertical Direction) Varies directly with local gravity g g g
Force F F F Newton (N) or Kilonewton (kN) Vector (Magnitude, Direction, Line of Action) Result of mass acceleration ( F = m ⋅ a F = m \cdot a F = m ⋅ a )
2. Vectors, Force Resolution & Sling Tension
A force is any interaction that, when unopposed, changes the motion of an object. A force vector is fully defined by four characteristics:
Magnitude: The quantitative size of the force (e.g., 50 kN 50\text{ kN} 50 kN ).
Direction: The line along which the force acts (e.g., 30 ∘ 30^\circ 3 0 ∘ to the horizontal).
Line of Action: The infinite straight line passing through the force vector.
Point of Application: The exact location where the force is impressed upon the load (e.g., a pad eye or lifting lug).
Resolving Force Vectors in Rigging
When slings are attached to a load at an angle, the tension in each sling leg ( T T T ) acts along the line of the sling. This diagonal tension force resolves into two perpendicular vector components:
Vertical Component ( F v F_v F v ): Supports the load's weight against gravity. F v = T ⋅ sin ( α ) F_v = T \cdot \sin(\alpha) F v = T ⋅ sin ( α )
Horizontal Component ( F h F_h F h ): Exerts an inward squeezing or compressive force on the load. F h = T ⋅ cos ( α ) F_h = T \cdot \cos(\alpha) F h = T ⋅ cos ( α ) Where α \alpha α is the angle of the sling leg relative to the horizontal plane. Crane Hook Point
- /|\
- / | \
- Sling Leg T1 / | \ Sling Leg T2
- / | \
- / | \
- /\ | /\
- / \α | α/ \
- ========[ Pad Eye ]=====[ Pad Eye ]========
- | LOAD |
- | Weight (W = m*g) |
- ===========================================
- Effect of Sling Angle on Leg Tension
For a symmetrical two-leg sling arrangement supporting a total weight W W W at an angle α \alpha α to the horizontal: Vertical force per leg F v = W 2 \text{Vertical force per leg } F_v = \frac{W}{2} Vertical force per leg F v = 2 W T = W 2 ⋅ sin ( α ) T = \frac{W}{2 \cdot \sin(\alpha)} T = 2 ⋅ sin ( α ) W
As the sling angle to the horizontal ( α \alpha α ) decreases (i.e., as the sling spreads flatter):
sin ( α ) \sin(\alpha) sin ( α ) decreases rapidly.
Tension T T T in each leg increases dramatically.
The horizontal compressive force F h = T ⋅ cos ( α ) F_h = T \cdot \cos(\alpha) F h = T ⋅ cos ( α ) squeezed into the load increases dramatically.
Worked Example: Sling Leg Tension Calculation
Consider a load with a total mass of 10 tonnes ( W = 10 × 9.81 = 98.1 kN W = 10 \times 9.81 = 98.1\text{ kN} W = 10 × 9.81 = 98.1 kN ) suspended by a two-leg symmetrical sling.
Case A: Sling angle α = 60 ∘ \alpha = 60^\circ α = 6 0 ∘ to horizontal (included angle between legs = 60 ∘ = 60^\circ = 6 0 ∘ ): T = 98.1 kN 2 ⋅ sin ( 60 ∘ ) = 98.1 2 ⋅ 0.8660 = 98.1 1.732 = 56.64 kN (approx. 5.77 tonnes per leg) T = \frac{98.1\text{ kN}}{2 \cdot \sin(60^\circ)} = \frac{98.1}{2 \cdot 0.8660} = \frac{98.1}{1.732} = 56.64\text{ kN}\text{ (approx. } 5.77\text{ tonnes per leg)} T = 2 ⋅ sin ( 6 0 ∘ ) 98.1 kN = 2 ⋅ 0.8660 98.1 = 1.732 98.1 = 56.64 kN (approx. 5.77 tonnes per leg)
Case B: Sling angle α = 30 ∘ \alpha = 30^\circ α = 3 0 ∘ to horizontal (included angle between legs = 120 ∘ = 120^\circ = 12 0 ∘ ): T = 98.1 kN 2 ⋅ sin ( 30 ∘ ) = 98.1 2 ⋅ 0.5000 = 98.1 1.000 = 98.10 kN (approx. 10.00 tonnes per leg) T = \frac{98.1\text{ kN}}{2 \cdot \sin(30^\circ)} = \frac{98.1}{2 \cdot 0.5000} = \frac{98.1}{1.000} = 98.10\text{ kN}\text{ (approx. } 10.00\text{ tonnes per leg)} T = 2 ⋅ sin ( 3 0 ∘ ) 98.1 kN = 2 ⋅ 0.5000 98.1 = 1.000 98.1 = 98.10 kN (approx. 10.00 tonnes per leg)
Engineering Conclusion: Flattening the sling angle from 60 ∘ 60^\circ 6 0 ∘ down to 30 ∘ 30^\circ 3 0 ∘ doubles the tension in each sling leg from 5.77 t 5.77\text{ t} 5.77 t to 10.00 t 10.00\text{ t} 10.00 t . This demonstrates why LEEA regulations prohibit using standard slings at included angles exceeding 120 ∘ 120^\circ 12 0 ∘ (angles to horizontal less than 30 ∘ 30^\circ 3 0 ∘ ).
3. Statics & The Principle of Moments
For a body to remain in static equilibrium during a lift ( suspended steadily without moving or rotating), two fundamental conditions must be satisfied:
Translational Equilibrium: The vector sum of all external forces acting on the body must be zero: ∑ F x = 0 and ∑ F y = 0 \sum F_x = 0 \quad \text{and} \quad \sum F_y = 0 ∑ F x = 0 and ∑ F y = 0
- Rotational Equilibrium: The sum of all moments acting about any point must be zero: ∑ M = 0 \sum M = 0 ∑ M = 0
- Moment of a Force
A moment (or torque) is the turning effect generated by a force acting at a distance from a pivot point or axis of rotation. Moment ( M ) = Force ( F ) × Perpendicular Distance ( d ) \text{Moment } (M) = \text{Force } (F) \times \text{Perpendicular Distance } (d) Moment ( M ) = Force ( F ) × Perpendicular Distance ( d )
SI Unit: Newton-meter (N·m) or Kilonewton-meter (kN·m).
Direction: Clockwise (+) or Counter-clockwise (-).
The Principle of Moments
State that if a body is in equilibrium, the sum of the clockwise moments about any chosen point equals the sum of the counter-clockwise moments about that same point: ∑ M clockwise = ∑ M counter-clockwise \sum M_{\text{clockwise}} = \sum M_{\text{counter-clockwise}} ∑ M clockwise = ∑ M counter-clockwise
4. Center of Gravity (CoG) & Load Stability
The Center of Gravity (CoG) is the unique point through which the entire weight vector of a body acts vertically downward, regardless of the body's orientation in space.
The Law of Suspension
When an object is suspended freely from a single point (such as a crane hook):
A suspended body will always rotate and adjust its position until its Center of Gravity lies directly on the vertical plumb line passing through the point of suspension. UNSTABLE / INCORRECT HOOK ALIGNMENT STABLE / CORRECT HOOK ALIGNMENT
- Crane Hook Crane Hook
- | |
- / \ / \
- / \ / \
- / \ / \
- / \ / \
- [Pad Eye] [Pad Eye] [Pad Eye] [Pad Eye]
- +-------------------------+ +-------------------------+
- | Heavy Motor | | | Heavy Motor | |
- | (CoG Left) | | | (CoG Center) | |
- +-------*-----------------+ +-------*-----------------+
- CoG CoG
- <-- Off-center distance --> <-- Hook directly above -->
RESULT: Load tilts violently! RESULT: Load hangs level!
If the crane hook is positioned away from the load's CoG:
The load will tilt as soon as it leaves the ground.
In severe cases, the load will swing violently, causing sling legs to slide along smooth surfaces, unbalancing the rigging, or causing structural failure.
Rule for Rigging: The crane hook MUST always be positioned directly above the load's CoG prior to hoisting.
Calculating the CoG for Asymmetric or Composite Loads
For complex objects composed of multiple items (e.g., a skid containing pumps, motors, and pipework), the overall CoG along a reference horizontal datum axis ( x x x -axis) is calculated using the Principle of Moments: x ˉ = ∑ ( m i ⋅ x i ) ∑ m i = m 1 x 1 + m 2 x 2 + m 3 x 3 + … m 1 + m 2 + m 3 + … \bar{x} = \frac{\sum (m_i \cdot x_i)}{\sum m_i} = \frac{m_1 x_1 + m_2 x_2 + m_3 x_3 + \dots}{m_1 + m_2 + m_3 + \dots} x ˉ = ∑ m i ∑ ( m i ⋅ x i ) = m 1 + m 2 + m 3 + … m 1 x 1 + m 2 x 2 + m 3 x 3 + …
Where:
x ˉ \bar{x} x ˉ = Distance from reference datum line to the overall Center of Gravity.
m i m_i m i = Mass of individual component i i i .
x i x_i x i = Distance from reference datum line to the center of gravity of component i i i .
Worked Numerical Example: CoG of a Machine Skid
A steel structural skid of length 6.0 m 6.0\text{ m} 6.0 m has a mass of 1 , 000 kg 1,000\text{ kg} 1 , 000 kg (with its CoG at its midpoint, 3.0 m 3.0\text{ m} 3.0 m from the left edge Datum A). Mounted on the skid are two heavy components:
Component 1: Electric motor, mass m 1 = 2 , 000 kg m_1 = 2,000\text{ kg} m 1 = 2 , 000 kg , located 1.5 m 1.5\text{ m} 1.5 m from Datum A.
Component 2: Cast iron pump, mass m 2 = 5 , 000 kg m_2 = 5,000\text{ kg} m 2 = 5 , 000 kg , located 4.5 m 4.5\text{ m} 4.5 m from Datum A.
Calculate the horizontal position of the overall Center of Gravity ( x ˉ \bar{x} x ˉ ) from Datum A.
Step 1: Identify all masses and their distances from Datum A:
Skid frame: m skid = 1 , 000 kg m_{\text{skid}} = 1,000\text{ kg} m skid = 1 , 000 kg , x skid = 3.0 m x_{\text{skid}} = 3.0\text{ m} x skid = 3.0 m
Motor: m 1 = 2 , 000 kg m_1 = 2,000\text{ kg} m 1 = 2 , 000 kg , x 1 = 1.5 m x_1 = 1.5\text{ m} x 1 = 1.5 m
Pump: m 2 = 5 , 000 kg m_2 = 5,000\text{ kg} m 2 = 5 , 000 kg , x 2 = 4.5 m x_2 = 4.5\text{ m} x 2 = 4.5 m
Total Mass ( ∑ m i \sum m_i ∑ m i ): 1 , 000 + 2 , 000 + 5 , 000 = 8 , 000 kg 1,000 + 2,000 + 5,000 = 8,000\text{ kg} 1 , 000 + 2 , 000 + 5 , 000 = 8 , 000 kg ( 8.0 tonnes 8.0\text{ tonnes} 8.0 tonnes ).
Step 2: Calculate total moment about Datum A: ∑ M = ( 1 , 000 kg × 3.0 m ) + ( 2 , 000 kg × 1.5 m ) + ( 5 , 000 kg × 4.5 m ) \sum M = (1,000\text{ kg} \times 3.0\text{ m}) + (2,000\text{ kg} \times 1.5\text{ m}) + (5,000\text{ kg} \times 4.5\text{ m}) ∑ M = ( 1 , 000 kg × 3.0 m ) + ( 2 , 000 kg × 1.5 m ) + ( 5 , 000 kg × 4.5 m ) ∑ M = 3 , 000 + 3 , 000 + 22 , 500 = 28 , 500 kg ⋅ m \sum M = 3,000 + 3,000 + 22,500 = 28,500\text{ kg}\cdot\text{m} ∑ M = 3 , 000 + 3 , 000 + 22 , 500 = 28 , 500 kg ⋅ m
Step 3: Calculate CoG location ( x ˉ \bar{x} x ˉ ): x ˉ = ∑ M ∑ m = 28 , 500 kg ⋅ m 8 , 000 kg = 3.5625 m from Datum A \bar{x} = \frac{\sum M}{\sum m} = \frac{28,500\text{ kg}\cdot\text{m}}{8,000\text{ kg}} = 3.5625\text{ m from Datum A} x ˉ = ∑ m ∑ M = 8 , 000 kg 28 , 500 kg ⋅ m = 3.5625 m from Datum A
Conclusion: The overall CoG lies 3.56 meters from the left end. The crane hook must be centered at 3.56 m 3.56\text{ m} 3.56 m from Datum A (not at the geometric center of 3.0 m 3.0\text{ m} 3.0 m ) to lift the skid perfectly level.
5. Dynamic Loading & Snatch Loading
All static mechanics calculations assume that the load is lifted smoothly at a constant, zero-acceleration velocity. However, real-world crane operations involve acceleration, decelerating braking, wind forces, and potential shock loads.
Newton's Second Law of Motion F total = m ⋅ ( g + a ) F_{\text{total}} = m \cdot (g + a) F total = m ⋅ ( g + a )
Where:
a a a = Upward acceleration of the crane hoist drive (m/s²).
If a hoist drive accelerates a load upward at a = 2.5 m/s 2 a = 2.5\text{ m/s}^2 a = 2.5 m/s 2 : F total = m ⋅ ( 9.81 + 2.50 ) = m ⋅ 12.31 m/s 2 F_{\text{total}} = m \cdot (9.81 + 2.50) = m \cdot 12.31\text{ m/s}^2 F total = m ⋅ ( 9.81 + 2.50 ) = m ⋅ 12.31 m/s 2
This represents a 25.5% increase in the effective tension applied to the slings and hoist rope over the static weight!
Snatch Loading (Shock Loading)
Snatch loading occurs when a hoist line abruptly takes up slack in a sling or when a falling load is suddenly arrested by a brake. The peak dynamic impact force ( F impact F_{\text{impact}} F impact ) can reach 200% to 400% (2x to 4x) of the static load weight. Snatch loading is a primary cause of catastrophic wire rope breakage, hook opening, and structural boom collapse.