Study guide

14.2 Amalgam & Metal Restorations

MFDS Part 1 Membership of the Faculty of Dental Surgery

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

Current Exam Facts How to Use This Guide Eligibility, Booking & the MFDS Pathway

2 Basic Sciences, History Taking & Clinical Assessment

1.1 Head & Neck Anatomy and Underpinning Basic Sciences 1.2 History Taking, Communication & Clinical Examination 1.3 Special Tests, Investigations & Diagnostic Accuracy 1.4 Differential Diagnosis, Triage & When to Biopsy 1.5 Dental Anomalies & Developmental Conditions

3 Cariology, Operative Dentistry & Endodontics

2.1 Cariology & Caries Diagnosis 2.2 Caries Management & Prevention 2.3 Operative Dentistry & Cavity Preparation 2.4 Endodontics 2.5 Tooth Surface Loss & Tooth Discolouration

4 Periodontology & Prosthodontics

3.1 Periodontology 3.2 Fixed Prosthodontics 3.3 Removable Prosthodontics 3.4 Occlusion & Occlusal Assessment

5 Paediatric Dentistry, Orthodontics & Dental Trauma

4.1 Paediatric Dentistry 4.2 Orthodontics 4.3 Dental Trauma 4.4 Orthodontic Assessment, Indices & Referral 4.5 Impacted Teeth & Radiographic Localisation

6 Oral Surgery, Treatment Planning & Prevention

5.1 Oral Surgery & Extractions 5.2 Treatment Planning & Patient Management 5.3 Prevention & Health Promotion

7 Cardiovascular, Respiratory & Endocrine Disease

6.1 Cardiovascular Disease 6.2 Respiratory Disease 6.3 Endocrine Disease & Diabetes 6.4 Bleeding Disorders & Anticoagulation

8 Haematology, Infection & the Medically Compromised Patient

7.1 Haematology 7.2 Infectious Disease 7.3 The Medically Compromised Patient 7.4 Neurological & Gastrointestinal Disease

9 Medical Emergencies in Dental Practice

8.1 Medical Emergencies & Resuscitation 8.2 Anaphylaxis & Acute Allergy 8.3 Emergency Drugs & the Resuscitation Kit

10 Special Care Dentistry, Mental Health & Anxiety Management

9.1 Special Care Dentistry & Patients with Disability 9.2 Mental Health & Behavioural Science 9.3 Dental Anxiety & Behaviour Management

11 Oral Medicine — Mucosal Disease & Orofacial Pain

10.1 Oral Mucosal Disease & Lichen Planus 10.2 Vesiculobullous & Ulcerative Disorders 10.3 Candidiasis & Fungal Infections 10.4 Orofacial Pain & Neuropathic Disorders

12 Oral Pathology — Lesions, Cysts, Tumours & Salivary Glands

11.1 Premalignant Lesions & Oral Cancer 11.2 Odontogenic Cysts 11.3 Odontogenic & Non-Odontogenic Tumours 11.4 Salivary Gland Disease

13 Pharmacology — Local Anaesthesia, Analgesia & Sedation

12.1 Local Anaesthesia 12.2 Analgesics & NSAIDs 12.3 Conscious Sedation

14 Pharmacology — Antimicrobials, Prescribing & Drug Interactions

13.1 Antimicrobials & Antibiotic Stewardship 13.2 Prescribing & Drug Interactions

15 Dental Materials

14.1 Properties & Testing of Dental Materials 14.2 Amalgam & Metal Restorations 14.3 Composite Resin & Adhesive Dentistry 14.4 Impression Materials, Cements & Other Materials

16 Microbiology, Infection Control & Radiology

15.1 Oral Microbiology & Infection Control 15.2 Dental Radiology & Imaging 15.3 Radiation Protection

17 Law, Ethics, Professionalism & Evidence-Based Dentistry

16.1 Consent & Confidentiality 16.2 GDC Standards & Professionalism 16.3 Safeguarding & Duty of Candour 16.4 Evidence-Based Dentistry & Research Methods 16.5 Records, Information Governance & Regulation 16.6 Communication, Teamworking, Human Factors & Raising Concerns

18 Statistics, Dental Public Health, Critical Appraisal & Exam Strategy

17.1 Statistics & Critical Appraisal 17.2 Dental Public Health & Epidemiology 17.3 SBA Technique & Exam Strategy 17.4 Final Review & Key Points

14.2 Amalgam & Metal Restorations

Key Takeaways Explain This Topic AI

Dental amalgam is a metallic alloy formed by reacting a powder of alloy (mainly silver–tin, with copper and zinc) with liquid mercury; the setting reaction forms the γ₂-eliminating high-copper amalgam matrix (Cu₆Sn₅ η-phase traps the tin).

High-copper amalgams (≥6% copper) eliminate the γ₂ (Sn₇Hg) phase, giving higher strength and corrosion resistance than low-copper amalgams.

Amalgam phases: γ (Ag₃Sn, the alloy powder), γ₁ (Ag₂Hg₃, matrix), γ₂ (Sn₇Hg, the weak corrosion-prone phase).

Mechanical retention (undercuts, locks, grooves) is required because amalgam does not bond to tooth — cavity design follows principles of retention and resistance form.

Modern amalgams are capped condensable spherical or admixed alloys; in Great Britain the assimilated Regulation (EU) 2017/852 bars amalgam for under-15s and pregnant or breastfeeding women unless strictly necessary, while the EU ban on general use (Regulation (EU) 2024/1849, from 1 January 2025) does not apply in Great Britain and is derogated in Northern Ireland until 31 December 2034.

Last updated: August 2026

What Is Dental Amalgam?

Dental amalgam is formed by triturating (mixing) a powder alloy with liquid mercury to produce a plastic mass that is condensed into the cavity and hardens by a setting reaction. The powder is principally silver–tin (the γ phase, Ag₃Sn), with copper and small amounts of zinc .

The Setting Reaction and Phases

In the low-copper amalgam reaction:

Ag₃Sn (γ, powder) + Hg → Ag₂Hg₃ (γ₁, matrix) + Sn₇Hg (γ₂, weak, corrosion-prone) + unreacted γ.

The γ₂ phase (Sn₇Hg) is the weakest and most corrosion-prone phase; it is responsible for the lower strength and corrosion of low-copper amalgams.

High-copper amalgams (≥6% copper, now standard) react so that tin reacts with copper instead of mercury, forming Cu₆Sn₅ (η-phase) and Cu₃Sn (ε-phase) . This eliminates the γ₂ phase , giving greater strength and corrosion resistance.

  • Phase Formula Origin Property
  • γ (gamma) Ag₃Sn Alloy powder Strong, the unreacted core
  • γ₁ (gamma-1) Ag₂Hg₃ Matrix Hard, forms the body
  • γ₂ (gamma-2) Sn₇Hg Low-Cu only Weak, corrodes — eliminated in high-Cu
  • η (eta) Cu₆Sn₅ High-Cu reaction Traps tin, hard, corrosion-resistant
  • Alloy Types and Particle Shape

Lathe-cut — filings cut from an ingot; irregular, give a 'scratchy' condensation feel.

Spherical — atomised droplets; condense easily, higher early strength, less mercury (≤43%).

Admixed (blended) — mix of lathe-cut and spherical; combines strength and handling; the common modern choice.

Spherical alloys need lower mercury content and condense readily; admixed alloys pack better against matrix bands and are preferred for pins.

Mechanical Properties and Corrosion

  • Property Amalgam Note
  • Compressive strength ~300–400 MPa at 24 h High — suited to load-bearing Class I/II
  • Tensile strength Low (~50 MPa) Brittle; needs bulk and mechanical retention
  • Creep Low in high-Cu Creep correlates with marginal fracture

Corrosion γ₂ phase corrodes (low-Cu); high-Cu resists Corrosion products can seal margins but weaken the restoration

Marginal breakdown (Ditching) results from creep and corrosion at the margin; high-copper, low-creep alloys reduce it.

Cavity Design — Retention and Resistance Form

Because amalgam does not bond to tooth, it needs mechanical retention . Classical cavity design (Black's principles, modified for modern practice) provides:

Retention form — features that resist dislodgement: undercut walls, dovetails, pins, grooves, locks, and the isthmus width.

Resistance form — features that resist fracture under load: adequate bulk (≥1 mm at the isthmus, often 1.5 mm), flat floors, rounded angles (stress concentrators cause fracture), and a 90° cavosurface margin (butt joint).

Specific Design Points

  • Class Retention/resistance features
  • Class I Depth 1.5–2 mm, flat floor, walls slightly divergent occlusally; isthmus not too wide

Class II Proximal box with gingival floor in dentine (~1 mm axial), gingival wall at 90° to axial wall, isthmus 1.5 mm wide

Class V Undercut at occlusal and gingival walls; cavity shallow to avoid pulp

Sharp internal angles concentrate stress and cause fracture; rounded internal line angles are a hallmark of amalgam design.

Handling and Clinical Technique

Mercury content — modern capsules are pre-proportioned (~42–43% mercury in the final mix for spherical). Trituration time affects consistency and properties.

Condensation — condense each increment with sufficient pressure to adapt to walls and express mercury-rich matrix to the surface; under-condensation weakens the restoration.

Carving — carve to anatomy after initial set; do not over-carve margins (thins them → fracture). Overhangs must be removed.

Polishing — final polish 24 h later reduces corrosion and plaque retention; over-polishing generates heat and mercury vapour.

The Mercury Question and Regulation

The Minamata Convention on Mercury (agreed 2013, in force 2017) commits parties to phasing down dental amalgam. In Great Britain , the assimilated Regulation (EU) 2017/852 still applies and prohibits amalgam for:

Children under 15 (deciduous teeth, with limited exceptions).

Pregnant or breastfeeding women , except where strictly medically necessary.

Dental teams must use amalgam separators (from 2019) and follow mercury hygiene. The EU ban extends to a full prohibition on amalgam use from 1 January 2026 (amended 2024), with limited derogations. UK practice follows this direction; the MHRA and BDA advise reducing use and using alternatives where clinically appropriate.

Mercury Hygiene

Pre-capsulated alloy only (no bulk mercury handling).

Rubber dam, high-volume evacuation, amalgam separator.

Avoid polishing with dry stones; collect and store scrap amalgam for disposal.

Alternatives

Direct composites — bonded, aesthetic, mercury-free; technique-sensitive.

Glass ionomer / resin-modified GIC — chemically bond and release fluoride; for low-stress and liners.

Cast gold / ceramic inlays/onlays — high strength/wear resistance, indirect.