Study guide

14.3 Composite Resin & Adhesive Dentistry

MFDS Part 1 Membership of the Faculty of Dental Surgery

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

Current Exam Facts How to Use This Guide Eligibility, Booking & the MFDS Pathway

2 Basic Sciences, History Taking & Clinical Assessment

1.1 Head & Neck Anatomy and Underpinning Basic Sciences 1.2 History Taking, Communication & Clinical Examination 1.3 Special Tests, Investigations & Diagnostic Accuracy 1.4 Differential Diagnosis, Triage & When to Biopsy 1.5 Dental Anomalies & Developmental Conditions

3 Cariology, Operative Dentistry & Endodontics

2.1 Cariology & Caries Diagnosis 2.2 Caries Management & Prevention 2.3 Operative Dentistry & Cavity Preparation 2.4 Endodontics 2.5 Tooth Surface Loss & Tooth Discolouration

4 Periodontology & Prosthodontics

3.1 Periodontology 3.2 Fixed Prosthodontics 3.3 Removable Prosthodontics 3.4 Occlusion & Occlusal Assessment

5 Paediatric Dentistry, Orthodontics & Dental Trauma

4.1 Paediatric Dentistry 4.2 Orthodontics 4.3 Dental Trauma 4.4 Orthodontic Assessment, Indices & Referral 4.5 Impacted Teeth & Radiographic Localisation

6 Oral Surgery, Treatment Planning & Prevention

5.1 Oral Surgery & Extractions 5.2 Treatment Planning & Patient Management 5.3 Prevention & Health Promotion

7 Cardiovascular, Respiratory & Endocrine Disease

6.1 Cardiovascular Disease 6.2 Respiratory Disease 6.3 Endocrine Disease & Diabetes 6.4 Bleeding Disorders & Anticoagulation

8 Haematology, Infection & the Medically Compromised Patient

7.1 Haematology 7.2 Infectious Disease 7.3 The Medically Compromised Patient 7.4 Neurological & Gastrointestinal Disease

9 Medical Emergencies in Dental Practice

8.1 Medical Emergencies & Resuscitation 8.2 Anaphylaxis & Acute Allergy 8.3 Emergency Drugs & the Resuscitation Kit

10 Special Care Dentistry, Mental Health & Anxiety Management

9.1 Special Care Dentistry & Patients with Disability 9.2 Mental Health & Behavioural Science 9.3 Dental Anxiety & Behaviour Management

11 Oral Medicine — Mucosal Disease & Orofacial Pain

10.1 Oral Mucosal Disease & Lichen Planus 10.2 Vesiculobullous & Ulcerative Disorders 10.3 Candidiasis & Fungal Infections 10.4 Orofacial Pain & Neuropathic Disorders

12 Oral Pathology — Lesions, Cysts, Tumours & Salivary Glands

11.1 Premalignant Lesions & Oral Cancer 11.2 Odontogenic Cysts 11.3 Odontogenic & Non-Odontogenic Tumours 11.4 Salivary Gland Disease

13 Pharmacology — Local Anaesthesia, Analgesia & Sedation

12.1 Local Anaesthesia 12.2 Analgesics & NSAIDs 12.3 Conscious Sedation

14 Pharmacology — Antimicrobials, Prescribing & Drug Interactions

13.1 Antimicrobials & Antibiotic Stewardship 13.2 Prescribing & Drug Interactions

15 Dental Materials

14.1 Properties & Testing of Dental Materials 14.2 Amalgam & Metal Restorations 14.3 Composite Resin & Adhesive Dentistry 14.4 Impression Materials, Cements & Other Materials

16 Microbiology, Infection Control & Radiology

15.1 Oral Microbiology & Infection Control 15.2 Dental Radiology & Imaging 15.3 Radiation Protection

17 Law, Ethics, Professionalism & Evidence-Based Dentistry

16.1 Consent & Confidentiality 16.2 GDC Standards & Professionalism 16.3 Safeguarding & Duty of Candour 16.4 Evidence-Based Dentistry & Research Methods 16.5 Records, Information Governance & Regulation 16.6 Communication, Teamworking, Human Factors & Raising Concerns

18 Statistics, Dental Public Health, Critical Appraisal & Exam Strategy

17.1 Statistics & Critical Appraisal 17.2 Dental Public Health & Epidemiology 17.3 SBA Technique & Exam Strategy 17.4 Final Review & Key Points

14.3 Composite Resin & Adhesive Dentistry

Key Takeaways Explain This Topic AI

Composites are a matrix of dimethacrylate resin (e.g. Bis-GMA/TEGDMA) filled with inorganic particles (glass/silica); filler load and particle size govern mechanical properties, wear, polish, and shrinkage.

Polymerisation shrinkage (1.5–5% by volume) generates contraction stress and marginal gaps; placement is controlled by incremental layering, bulk-fill materials with stress modulators, and good light-curing technique.

The acid-etch bond to enamel is micromechanical resin tag infiltration of etched enamel prisms; dentine bonding uses a hybrid layer of infiltrated collagen and a smear layer managed by total-etch or self-etch adhesive strategies.

Generation classifications simplify the strategy: total-etch (etch-and-rinse) vs self-etch (one-step or two-step); universal adhesives can be used in either mode and bond to multiple substrates.

Light-curing variables — irradiance, wavelength (460–480 nm for camphorquinone), distance, time, and resin depth — determine degree of conversion and depth of cure; inadequate curing underlies sensitivity and failure.

Last updated: August 2026

Composition and Classification

A dental composite has three components: an organic resin matrix (typically Bis-GMA blended with lower-viscosity diluents like TEGDMA ), inorganic filler particles (barium glass, silica, zirconia), and a coupling agent (silane) that bonds filler to matrix. The photoinitiator is usually camphorquinone (absorbs blue light around 460–480 nm ) with a tertiary amine co-initiator.

Filler and Composite Types

  • Type Filler size Use
  • Macrofilled 10–50 µm Strong but unpolishable, rough surface
  • Microfilled 0.01–0.1 µm Polishable, aesthetic, low strength — Class III/V
  • Hybrid / nanohybrid mixed sub-micron + nano Current universal materials — balance of strength and polish
  • Bulk-fill modified with stress modulators 4–5 mm increments, lower shrinkage

Filler loading (by weight/volume) raises modulus and wear resistance and lowers polymerisation shrinkage and water sorption. Heavily filled composites are stronger and shrink less but harder to polish.

Polymerisation Shrinkage and Stress

The setting reaction converts monomer to polymer with a 1.5–5% volume contraction . This contraction produces polymerisation stress at the bonded interface; if stress exceeds bond strength, the restoration debonds, opening a marginal gap that drives microleakage, postoperative sensitivity, and recurrent caries.

Strategies to Manage Shrinkage

Incremental layering — place 2 mm increments (oblique layers) so each shrink toward the cavity walls; reduces C-factor (ratio of bonded to unbonded surfaces) stress.

Bulk-fill composites — formulated with stress modulators and increased translucency for depth of cure; place up to 4–5 mm in one increment.

Wet-bonding technique (total-etch) — keep dentine moist to keep collagen expanded for hybrid layer infiltration.

Good light-curing — adequate irradiance and time.

The C-factor (configuration factor) = bonded surface area / unbonded surface area. A Class I has a high C-factor (5 walls bonded) → high shrinkage stress; Class IV is low C-factor → less stress. Incremental placement lowers the effective C-factor.

  • Adhesive Dentistry — Enamel and Dentine Bonding
  • Enamel Bonding (the original acid-etch)

Etch enamel with 35–37% phosphoric acid for 15–30 s → microporous surface of dissolved prism peripheries and cores.

Rinse and dry; low-viscosity resin flows into the etched microporosities and polymerises, forming resin tags — a micromechanical bond (20–30 MPa).

Enamel bonding is reliable; dry etched enamel gives a frosty-white appearance.

Dentine Bonding

Dentine is harder to bond: it is wet, vital, and covered by a smear layer . The bond depends on forming a hybrid layer — resin infiltrating the demineralised collagen network.

Strategy Steps Notes

Total-etch (etch-and-rinse) Etch enamel + dentine 15 s → rinse → leave dentine moist → apply primer + adhesive (2- or 3-bottle) Most predictable bond on dry enamel; risk of over-drying dentine (collagen collapse) or over-wetting

Self-etch Acidic primer etches and infiltrates simultaneously → adhesive Skips separate rinse; less technique-sensitive; bond slightly lower on enamel

Universal (multi-mode) Can be total-etch, selective-etch, or self-etch; MDP functional monomer bonds to multiple substrates Current standard; versatile

Generations (simplified)

3rd generation — etch dentine only, first dentine bond; weak.

4th/5th — total-etch, multi-bottle; 4th = separate primer + bond, 5th = combined.

6th/7th — self-etch, one-step or two-step; simplified but more hydrolysis risk.

8th (universal) — can be used in any mode; the modern choice.

Key bonding chemistry: the functional monomer 10-MDP (10-methacryloyloxydecyl dihydrogen phosphate) forms a stable chemical bond to hydroxyapatite and to metals — the basis of universal adhesives.

Light-Curing Technique

Adequate cure is non-negotiable; inadequate cure causes sensitivity, recurrent caries, and restoration failure.

  • Factor Requirement
  • Wavelength Match initiator — camphorquinone peak 460–480 nm (blue)
  • Irradiance ≥400 mW/cm² at the surface; modern LED lights 800–1500 mW/cm²
  • Time 10–20 s for 2 mm conventional; bulk-fill may need 20–40 s
  • Distance Light tip as close as possible; each 1 mm distance halves irradiance
  • Depth of cure ~2 mm conventional; 4–5 mm bulk-fill

The Marus '10 second rule' is a teaching aid — verify output regularly with a radiometer. Overcuring generates heat (pulp risk); undercuring is the commoner error. Curing lights must be checked for output and the tip kept clean.

Clinical Workflow Summary

Isolate (rubber dam), clean cavity.

Bevel enamel margins where aesthetic (Class IV); butt margins where load-bearing.

Etch enamel 30 s, dentine 15 s (total-etch) OR apply self-etch/universal as directed.

Rinse, keep dentine moist, apply primer/adhesive, light-cure.

Place composite in increments, light-cure each.

Finish and polish.

Pitfalls

Contamination with saliva/blood after etching — re-etch.

Over-drying dentine (total-etch) — collagen collapses, hybrid layer fails.

Under-cured increments — place within depth of cure.

Bulk-curing too deep a conventional composite — depth of cure insufficient.