Study guide
3.4 Occlusion & Occlusal Assessment
MFDS Part 1 Membership of the Faculty of Dental Surgery
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
Current Exam Facts How to Use This Guide Eligibility, Booking & the MFDS Pathway
2 Basic Sciences, History Taking & Clinical Assessment
1.1 Head & Neck Anatomy and Underpinning Basic Sciences 1.2 History Taking, Communication & Clinical Examination 1.3 Special Tests, Investigations & Diagnostic Accuracy 1.4 Differential Diagnosis, Triage & When to Biopsy 1.5 Dental Anomalies & Developmental Conditions
3 Cariology, Operative Dentistry & Endodontics
2.1 Cariology & Caries Diagnosis 2.2 Caries Management & Prevention 2.3 Operative Dentistry & Cavity Preparation 2.4 Endodontics 2.5 Tooth Surface Loss & Tooth Discolouration
4 Periodontology & Prosthodontics
3.1 Periodontology 3.2 Fixed Prosthodontics 3.3 Removable Prosthodontics 3.4 Occlusion & Occlusal Assessment
5 Paediatric Dentistry, Orthodontics & Dental Trauma
4.1 Paediatric Dentistry 4.2 Orthodontics 4.3 Dental Trauma 4.4 Orthodontic Assessment, Indices & Referral 4.5 Impacted Teeth & Radiographic Localisation
6 Oral Surgery, Treatment Planning & Prevention
5.1 Oral Surgery & Extractions 5.2 Treatment Planning & Patient Management 5.3 Prevention & Health Promotion
7 Cardiovascular, Respiratory & Endocrine Disease
6.1 Cardiovascular Disease 6.2 Respiratory Disease 6.3 Endocrine Disease & Diabetes 6.4 Bleeding Disorders & Anticoagulation
8 Haematology, Infection & the Medically Compromised Patient
7.1 Haematology 7.2 Infectious Disease 7.3 The Medically Compromised Patient 7.4 Neurological & Gastrointestinal Disease
9 Medical Emergencies in Dental Practice
8.1 Medical Emergencies & Resuscitation 8.2 Anaphylaxis & Acute Allergy 8.3 Emergency Drugs & the Resuscitation Kit
10 Special Care Dentistry, Mental Health & Anxiety Management
9.1 Special Care Dentistry & Patients with Disability 9.2 Mental Health & Behavioural Science 9.3 Dental Anxiety & Behaviour Management
11 Oral Medicine — Mucosal Disease & Orofacial Pain
10.1 Oral Mucosal Disease & Lichen Planus 10.2 Vesiculobullous & Ulcerative Disorders 10.3 Candidiasis & Fungal Infections 10.4 Orofacial Pain & Neuropathic Disorders
12 Oral Pathology — Lesions, Cysts, Tumours & Salivary Glands
11.1 Premalignant Lesions & Oral Cancer 11.2 Odontogenic Cysts 11.3 Odontogenic & Non-Odontogenic Tumours 11.4 Salivary Gland Disease
13 Pharmacology — Local Anaesthesia, Analgesia & Sedation
12.1 Local Anaesthesia 12.2 Analgesics & NSAIDs 12.3 Conscious Sedation
14 Pharmacology — Antimicrobials, Prescribing & Drug Interactions
13.1 Antimicrobials & Antibiotic Stewardship 13.2 Prescribing & Drug Interactions
15 Dental Materials
14.1 Properties & Testing of Dental Materials 14.2 Amalgam & Metal Restorations 14.3 Composite Resin & Adhesive Dentistry 14.4 Impression Materials, Cements & Other Materials
16 Microbiology, Infection Control & Radiology
15.1 Oral Microbiology & Infection Control 15.2 Dental Radiology & Imaging 15.3 Radiation Protection
17 Law, Ethics, Professionalism & Evidence-Based Dentistry
16.1 Consent & Confidentiality 16.2 GDC Standards & Professionalism 16.3 Safeguarding & Duty of Candour 16.4 Evidence-Based Dentistry & Research Methods 16.5 Records, Information Governance & Regulation 16.6 Communication, Teamworking, Human Factors & Raising Concerns
18 Statistics, Dental Public Health, Critical Appraisal & Exam Strategy
17.1 Statistics & Critical Appraisal 17.2 Dental Public Health & Epidemiology 17.3 SBA Technique & Exam Strategy 17.4 Final Review & Key Points
3.4 Occlusion & Occlusal Assessment
Key Takeaways Explain This Topic AI
Intercuspal position is the position of maximum intercuspation of the teeth, whereas retruded contact position is determined by the condyles in their retruded axial position and is reproducible independently of the teeth
Most restorative dentistry uses the conformative approach — restoring to the patient's existing intercuspal position; a reorganised approach starting from retruded contact position is reserved for extensive rehabilitation
Static occlusal goals are even, simultaneous posterior contacts with lighter anterior contacts; dynamic goals are anterior or canine guidance that disoccludes the posterior teeth in excursion, with no non-working-side interferences
Freeway space, the difference between resting vertical dimension and occlusal vertical dimension, is normally about 2 to 4 mm and is the check that a new denture or a raised occlusion has not overclosed or overopened the patient
Shimstock foil about 8 micrometres thick is the practical test of whether a contact is holding; articulating paper marks show where teeth touch but not how hard
Last updated: August 2026
Why Occlusion Is Examined
Outcome C1.7 asks for an understanding of the principles of occlusion , and C2.5 asks for ideal occlusal goals — static and dynamic . Occlusion is examined because it explains restorative failure: a fractured cusp, a de-bonded resin-bonded bridge, a persistently sensitive new crown and a failing anterior composite build-up all have occlusal explanations.
Reference Positions and Terminology
Term Definition
Intercuspal position (ICP) , also called centric occlusion The position of maximum intercuspation of the teeth, irrespective of condylar position. Tooth-determined
Retruded contact position (RCP) , also called centric relation contact The first tooth contact made when the mandible closes with the condyles in their retruded, unstrained axial position . Joint-determined and reproducible even in an edentulous patient
RCP–ICP slide The movement from first contact in RCP into ICP. Present in most people; a slide of about 1 mm or less that is straight and anterior is generally regarded as physiological
- Occlusal vertical dimension (OVD) Face height with the teeth in ICP
- Resting vertical dimension (RVD) Face height with the mandible at physiological rest
- Freeway space (interocclusal rest space) RVD minus OVD; normally about 2–4 mm
- Working side The side towards which the mandible moves in a lateral excursion
- Non-working (balancing) side The opposite side; contacts here are the most destructive interferences
- Static and Dynamic Occlusal Goals
- Static (teeth together, ICP)
Even, simultaneous contacts on the posterior teeth, directed along the long axes of the teeth.
Lighter anterior contacts than posterior — classically anterior teeth hold shimstock only lightly, so that they are protected from the heavy vertical loads the posterior teeth are designed to accept.
Stable stops — cusp-to-fossa or cusp-to-marginal-ridge contacts, not cusp-to-incline contacts, which generate lateral vectors and drift.
Dynamic (mandible moving)
Anterior guidance — in protrusion, the anterior teeth contact and disocclude the posterior teeth .
In lateral excursion, either canine guidance (the working-side canine alone disoccludes everything else) or group function (several working-side posterior teeth share the guidance). Both are acceptable; canine guidance distributes less load to the posterior teeth, group function spreads the load in a worn or periodontally reduced dentition.
No non-working-side (balancing) interferences. A contact on the non-working side is loaded at an unfavourable angle and is a recognised contributor to cusp fracture, restoration failure and muscle pain.
No interferences on the working side posterior to the guiding tooth.
Conformative Versus Reorganised
Approach What it means When to use
Conformative The restoration is made to fit the patient's existing ICP , adding no new contacts and removing none The overwhelming majority of restorative dentistry, including single crowns, bridges and routine restorations, where the existing occlusion is stable and comfortable
Reorganised The occlusion is rebuilt from retruded contact position , usually at an altered OVD, using a facebow record, a semi-adjustable articulator and often a stabilisation splint first Extensive rehabilitation, severe generalised tooth wear, when the existing ICP is unstable or has been lost, or when the OVD must change
Choosing the reorganised approach when the conformative approach would do commits the patient to far more tooth destruction and cost, and is a common examination trap.
Examining the Occlusion
Look before you touch. Wear facets, fractured cusps, tooth mobility, migration, cheek and tongue ridging, masseter hypertrophy.
ICP — ask the patient to close and identify the contacts; mark with articulating paper (a thin foil, ideally two colours: one for ICP and one for excursions).
Shimstock — 8 micrometre metal foil. A contact that grips the foil is holding; articulating paper marks show where teeth touch, shimstock shows whether the contact is loaded. This is the key discriminator when checking a new restoration.
RCP — guide the mandible with bimanual manipulation or a leaf gauge, identify the first contact, and record the direction and size of the slide into ICP.
Excursions — protrusive and left and right lateral, recording the guiding teeth and any interferences, particularly non-working-side contacts.
Records where needed — alginate or digital impressions for study casts, a facebow to relate the maxillary cast to the hinge axis, and an interocclusal record. Mounted casts allow occlusal analysis without the patient present and are essential before any reorganised approach.
Practical rule for a new crown: before preparation, record which teeth hold shimstock in ICP and which teeth guide in excursion. At fit, the same teeth should hold and guide. If the new crown is the only tooth holding shimstock, it is high, and the patient will return with sensitivity, a fractured restoration or muscle pain.
Occlusion and Pathology
Primary occlusal trauma — excessive force on a tooth with normal support; reversible, no attachment loss.
Secondary occlusal trauma — normal or excessive force on a tooth with reduced support; contributes to mobility and is a Stage IV complexity factor in the 2017 periodontal classification.
Occlusal overload of implants — implants have no periodontal ligament and no proprioceptive buffer, so contacts are deliberately made lighter than on adjacent natural teeth, and lateral guidance is kept off implant-supported units where possible.
Parafunction — bruxism and clenching amplify every occlusal problem. A stabilisation (Michigan-type) splint provides even contacts in RCP with canine guidance and protects teeth and restorations while the diagnosis is confirmed.