Study guide

3.3 Removable Prosthodontics

MFDS Part 1 Membership of the Faculty of Dental Surgery

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

Current Exam Facts How to Use This Guide Eligibility, Booking & the MFDS Pathway

2 Basic Sciences, History Taking & Clinical Assessment

1.1 Head & Neck Anatomy and Underpinning Basic Sciences 1.2 History Taking, Communication & Clinical Examination 1.3 Special Tests, Investigations & Diagnostic Accuracy 1.4 Differential Diagnosis, Triage & When to Biopsy 1.5 Dental Anomalies & Developmental Conditions

3 Cariology, Operative Dentistry & Endodontics

2.1 Cariology & Caries Diagnosis 2.2 Caries Management & Prevention 2.3 Operative Dentistry & Cavity Preparation 2.4 Endodontics 2.5 Tooth Surface Loss & Tooth Discolouration

4 Periodontology & Prosthodontics

3.1 Periodontology 3.2 Fixed Prosthodontics 3.3 Removable Prosthodontics 3.4 Occlusion & Occlusal Assessment

5 Paediatric Dentistry, Orthodontics & Dental Trauma

4.1 Paediatric Dentistry 4.2 Orthodontics 4.3 Dental Trauma 4.4 Orthodontic Assessment, Indices & Referral 4.5 Impacted Teeth & Radiographic Localisation

6 Oral Surgery, Treatment Planning & Prevention

5.1 Oral Surgery & Extractions 5.2 Treatment Planning & Patient Management 5.3 Prevention & Health Promotion

7 Cardiovascular, Respiratory & Endocrine Disease

6.1 Cardiovascular Disease 6.2 Respiratory Disease 6.3 Endocrine Disease & Diabetes 6.4 Bleeding Disorders & Anticoagulation

8 Haematology, Infection & the Medically Compromised Patient

7.1 Haematology 7.2 Infectious Disease 7.3 The Medically Compromised Patient 7.4 Neurological & Gastrointestinal Disease

9 Medical Emergencies in Dental Practice

8.1 Medical Emergencies & Resuscitation 8.2 Anaphylaxis & Acute Allergy 8.3 Emergency Drugs & the Resuscitation Kit

10 Special Care Dentistry, Mental Health & Anxiety Management

9.1 Special Care Dentistry & Patients with Disability 9.2 Mental Health & Behavioural Science 9.3 Dental Anxiety & Behaviour Management

11 Oral Medicine — Mucosal Disease & Orofacial Pain

10.1 Oral Mucosal Disease & Lichen Planus 10.2 Vesiculobullous & Ulcerative Disorders 10.3 Candidiasis & Fungal Infections 10.4 Orofacial Pain & Neuropathic Disorders

12 Oral Pathology — Lesions, Cysts, Tumours & Salivary Glands

11.1 Premalignant Lesions & Oral Cancer 11.2 Odontogenic Cysts 11.3 Odontogenic & Non-Odontogenic Tumours 11.4 Salivary Gland Disease

13 Pharmacology — Local Anaesthesia, Analgesia & Sedation

12.1 Local Anaesthesia 12.2 Analgesics & NSAIDs 12.3 Conscious Sedation

14 Pharmacology — Antimicrobials, Prescribing & Drug Interactions

13.1 Antimicrobials & Antibiotic Stewardship 13.2 Prescribing & Drug Interactions

15 Dental Materials

14.1 Properties & Testing of Dental Materials 14.2 Amalgam & Metal Restorations 14.3 Composite Resin & Adhesive Dentistry 14.4 Impression Materials, Cements & Other Materials

16 Microbiology, Infection Control & Radiology

15.1 Oral Microbiology & Infection Control 15.2 Dental Radiology & Imaging 15.3 Radiation Protection

17 Law, Ethics, Professionalism & Evidence-Based Dentistry

16.1 Consent & Confidentiality 16.2 GDC Standards & Professionalism 16.3 Safeguarding & Duty of Candour 16.4 Evidence-Based Dentistry & Research Methods 16.5 Records, Information Governance & Regulation 16.6 Communication, Teamworking, Human Factors & Raising Concerns

18 Statistics, Dental Public Health, Critical Appraisal & Exam Strategy

17.1 Statistics & Critical Appraisal 17.2 Dental Public Health & Epidemiology 17.3 SBA Technique & Exam Strategy 17.4 Final Review & Key Points

3.3 Removable Prosthodontics

Key Takeaways Explain This Topic AI

Kennedy Class I (bilateral free-end saddles) and Class II (unilateral free-end saddle) are tooth-and-tissue supported and require stress-breaking clasps (RPI/RPA) and indirect retainers; Class III (bounded saddle) is tooth-supported and the most stable

The RPI clasp (Rest, Proximal plate, I-bar) is designed for distal-extension saddles: the mesial rest and proximal plate direct forces along the long axis of the abutment, and the gingivally approaching I-bar disengages under functional load

A rest transfers occlusal load along the tooth's long axis (support); a clasp arm provides retention against dislodgement; an indirect retainer resists rotation of the saddle away from the ridge

The copy denture technique preserves the polished surface and palatal fit of a successful existing denture when fabricating a replacement, avoiding the common problem of a new denture that the patient cannot tolerate

Post-dam creates a peripheral seal at the posterior border of an upper complete denture by displacing the soft tissues over the vibrating line; without it, the denture breaks suction and drops

Last updated: August 2026

Kennedy Classification

The Kennedy classification (Edward Kennedy, 1923) is the most widely accepted system for classifying partially edentulous arches. Applegate's rules govern its application.

Class Description Support Stability

I Bilateral edentulous areas posterior to all remaining teeth (bilateral free-end saddles) Tooth-and-tissue Least stable; rotates in function

II Unilateral edentulous area posterior to all remaining teeth (single free-end saddle) Tooth-and-tissue Less stable than III

III Unilateral bounded edentulous area (teeth present anteriorly and posteriorly) Tooth Most stable; minimal rotation

IV Single bilateral (crossing the midline) edentulous area anterior to remaining teeth Tooth Variable; requires indirect retention

Applegate's Rules (selected)

Rule 2: A missing third molar that will not be replaced is not considered.

Rule 3: A present third molar used as an abutment is considered.

Rule 5: The most posterior edentulous area determines the class.

Rule 6: Additional edentulous areas are modification spaces , designated by number (e.g., Class I Mod 2).

Rule 7: Only the number of modification spaces matters, not their size.

Rule 8: Class IV has no modification spaces ; any additional space reclassifies the case.

Components of a Partial Denture

Every partial denture has five main components, each with a distinct function:

  • Component Function Notes
  • Direct retainer (clasp) Retention against dislodgement Engages undercut on the abutment
  • Rest Support; transfers occlusal load along the long axis of the tooth Placed on prepared rest seats

Major connector Unites the components; distributes load across the arch Lingual bar, palatal bar/strap, lingual plate

Minor connector Connects clasps, rests, and saddles to the major connector

Denture base and artificial teeth Restores aesthetics and occlusion; transmits load to the ridge Acrylic or cobalt-chromium

Indirect retainer Resists rotation of a free-end saddle away from the ridge Required in Class I and II; placed far from the fulcrum line

Rest vs Retention vs Support

Support is resistance to vertical movement towards the tissues. Provided by rests (occlusal, cingulum, incisal) seated on tooth rest seats, and by the denture base on the ridge.

Retention is resistance to movement away from the tissues. Provided by clasps engaging undercuts, by adhesion and cohesion (complete dentures), and by muscular control (polished surface).

Stability is resistance to lateral (horizontal) movement. Provided by broad adaptation of the base, tooth contact (rests, guiding planes), and balanced occlusion .

  • Clasp Design
  • Clasp Materials and Types

Cast cobalt-chromium (Co-Cr): Rigid; used where undercut is 0.25 mm or less. Suitable for gingivally approaching or circumferential designs. Strong and durable; the most common material for cast partial dentures.

Wrought wire (stainless steel or gold): More flexible than cast; used where the clasp arm must flex into a deeper undercut without permanent deformation. The undercut depths conventionally taught in the UK are 0.25 mm for cast cobalt-chromium , 0.5 mm for cast gold and 0.75 mm for wrought stainless steel . Commonly used on premolars and canines.

Acrylic resin: Used in acrylic partial dentures (transitional); less retentive and less durable.

Clasp Designs for Distal-Extension Saddles (Class I and II)

Design Components Action

RPI R est (mesial), P roximal plate, I -bar (gingivally approaching, mesiobuccal) Mesial rest directs force along the long axis; under functional load the saddle rotates and the I-bar disengages, reducing stress on the abutment

RPA R est (mesial), P roximal plate, A ker (circumferential cast clasp) Used when a gingivally approaching I-bar is contraindicated (e.g., severe buccal undercut, shallow vestibule); less stress-breaking than RPI

Combination clasp Cast Co-Cr retainer + wrought wire clasp arm Wrought wire provides flexibility for deeper undercuts; commonly used when a cast clasp would be too rigid

Circumferential (Aker) Clasp

Used in Class III (tooth-supported) saddles where the saddle does not rotate.

Engages a mesiobuccal or mesiolingual undercut (0.25 mm typical).

Requires a buccal undercut and an occlusal rest; provides excellent retention for bounded saddles.

Altered Cast Technique

For Class I and II distal-extension saddles, the saddle is tooth-supported at one end and tissue-supported at the other. A single impression cannot capture both accurately. The altered cast (altered impression) technique modifies the working cast so the free-end saddle area reflects functional support of the mucosa:

Make a preliminary impression and cast.

Construct the metal framework on the preliminary cast.

Take a secondary impression of the free-end saddle area using the framework as an impression tray, with a mucostatic or functional material (e.g., zinc oxide eugenol or silicone with pressure).

Modify the working cast by replacing the saddle area with the new impression.

This distributes load between the abutment tooth and the ridge more favourably, reducing abutment stress and improving stability.

  • Complete Dentures
  • Border Seal and Post-Dam

Retention of a complete denture depends on a peripheral (border) seal preventing air ingress beneath the denture. The Pound's or neutral zone and polished surface contours harness cheek, lip, and tongue musculature to aid retention.

Post-dam: A raised groove along the posterior border of an upper denture that displaces the soft tissues over the vibrating line (ah-line), creating a peripheral seal. Without a post-dam, the upper denture breaks suction and drops. It is cut into the working cast or pressed into the finished denture.

Border moulding: The impression borders are shaped to fill the sulcus functionally, capturing the depth and width of the vestibule during movement.

POIP (Polished Surface of the Impression): Refers to the external surface of the impression that becomes the polished surface of the denture; it must be contoured to be compatible with surrounding musculature.

Copy Denture Technique

The copy denture technique is used when an existing denture is functionally successful but worn or stained. It preserves the polished surface , palatal fit , and occlusal relationship that the patient has adapted to. Steps:

Take an impression of the existing denture (or mould a copy).

Pour a copy in acrylic or investment.

Use the copy as a base for a new impression of the underlying tissues (wash impression).

Process the new denture maintaining the established polished surface and tooth positions.

Advantages: faster adaptation, avoids the common problem of a new denture the patient cannot tolerate. Indicated for elderly or frail patients who have worn the same denture for many years.

Immediate, Transitional, and Overdentures

Type Description Indication

Immediate denture Inserted immediately after extraction of remaining teeth Maintains aesthetics and function during healing; alveolar resorption requires early reline or replacement

Transitional (interim) partial denture Temporary; replaces teeth while definitive treatment is planned Post-extraction healing, waiting for implant placement, or stabilising occlusion

Definitive partial denture Long-term; usually cast Co-Cr Stable dentition and healed ridges

Overdenture Complete or partial denture over retained roots or implants Retained roots preserve alveolar bone and provide sensory feedback; attachments (studs, bars) aid retention

Common Problems and Adjustments

Pain / sore spots: From over-extension, premature contacts, or sharp acrylic. Relieve the area; recheck occlusion.

Looseness: From poor border seal, inadequate undercut engagement, or unfavourable muscle forces. Re-border, adjust clasps, or improve polished surface contour.

Gagging: From posterior over-extension of the upper denture or psychological factors. Reduce posterior palatal extension; ensure post-dam is correctly placed.

Retained teeth with a new denture: If teeth are not accounted for in the design, clasps may not engage correctly.

Denture stomatitis: Candida albicans under the denture. Treat with antifungal (miconazole gel or nystatin), improve denture hygiene, and advise leaving the denture out at night.

Patient Instructions

Wear the denture; remove at night where possible to rest tissues.

Clean over a basin of water to avoid fracture if dropped.

Use a soft brush and soap or denture paste (not toothpaste, which is abrasive to acrylic).

Return for review after 24-48 hours for adjustments; expect a settling-in period of several weeks.