Study guide
3.6 Confined Spaces Regulations 1997: Risk Assessment, Atmosphere Testing & Rescue Procedures
CITB Site Management Safety Training Scheme SMSTS
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Legal Framework, CDM 2015 & Health and Safety Management
1.1 How the SMSTS Course and Examination Actually Work 1.2 Health and Safety at Work etc. Act 1974 (HASAWA) & Statutory Duties 1.3 Management of Health and Safety at Work Regulations 1999 & HSG65 (Plan-Do-Check-Act) 1.4 CDM 2015 Overview & Five Duty Holders (Client, Principal Designer, Principal Contractor, Designer, Contractor) 1.5 CDM 2015 Project Documentation: PCI, Construction Phase Plan & Health and Safety File 1.6 Statutory Notifications (F10), Enforcement Notices (Improvement/Prohibition), and Fee for Intervention (FFI) 1.7 RIDDOR 2013: Reporting Over-7-Day Injuries, Specified Injuries, Occupational Diseases & Dangerous Occurrences
2 Chapter 2: Risk Management, RAMS & Site Safety Leadership
2.1 Principles of Risk Assessment & Five Steps to Risk Assessment 2.2 Hierarchy of Control Measures & Risk Matrices 2.3 Developing, Reviewing, and Implementing Risk Assessments & Method Statements (RAMS) 2.4 Permit to Work (PTW) Systems for High-Risk Activities 2.5 Worker Consultation, Toolbox Talks, and Safety Leadership Culture 2.6 Behavioural Safety, Human Factors, and Accident Investigation Techniques
3 Chapter 3: High-Risk Site Operations: Height, Excavations & Confined Spaces
3.1 Work at Height Regulations 2005 & Hierarchy of Control for Height Work 3.2 Scaffolding Standards (TG20, BS EN 12811) & Statutory 7-Day Inspection Regimes 3.3 Mobile Elevating Work Platforms (MEWPs), Ladders, Tower Scaffolds & Fragile Roof Safety 3.4 Excavation Safety: Preventing Ground Collapse, Shoring, Battering & Edge Protection 3.5 Underground Services Avoidance (HSG47): Cable Avoidance Tools (CAT) & Genny Operation 3.6 Confined Spaces Regulations 1997: Risk Assessment, Atmosphere Testing & Rescue Procedures 3.7 Temporary Works Management: BS 5975-1, Coordinator Roles & Permits to Load and Strike
4 Chapter 4: Occupational Health, Chemical Safety & Physical Hazards
4.1 Control of Substances Hazardous to Health (COSHH) Regulations & Exposure Limits 4.2 Respirable Crystalline Silica (RCS), Dust Control & Respiratory Protective Equipment (RPE) 4.3 Asbestos Management on Construction Sites: Control of Asbestos Regulations 2012 4.4 Noise at Work Regulations 2005 & Hand-Arm Vibration Syndrome (HAVS) Exposure Action Values 4.5 Manual Handling Operations Regulations 1992, Ergonomics & Musculoskeletal Health 4.6 Health Surveillance, Medical Fitness & Workplace Hygiene/Wellbeing 4.7 Lead in Buildings: Control of Lead at Work Regulations 2002 & Blood-Lead Surveillance 4.8 Drugs and Alcohol at Work: Legal Framework, Site Policy, Testing & Support
5 Chapter 5: Fire Safety, Electrical Protection & Plant Operations
5.1 Fire Prevention on Construction Sites (HSG168), Fire Triangle & Hot Work Permits 5.2 Fire Extinguishers, Means of Escape, LPG Storage & Emergency Evacuation Plans 5.3 Electricity at Work Regulations 1989 & Safe Isolation Procedures 5.4 110V Reduced Low Voltage Systems, RCDs & Overhead Power Lines Safety (GS6) 5.5 Provision and Use of Work Equipment Regulations 1998 (PUWER) & Equipment Inspections 5.6 Lifting Operations and Lifting Equipment Regulations 1998 (LOLER), Crane Safety & Rigging
6 Chapter 6: Site Setup, Logistics, Welfare & Environmental Protection
6.1 CDM 2015 Schedule 2 Welfare Facilities Standards & Site Setup Requirements 6.2 Site Traffic Management, Pedestrian-Vehicle Segregation & Delivery Logistics 6.3 Site Inductions, Security, Signage & Competence Verification (CSCS/CPCS) 6.4 First Aid at Work Regulations 1981: Needs Assessment, First Aiders & Equipment 6.5 Environmental Protection: Waste Management (Duty of Care), Pollution Prevention & Noise Control 6.6 Mobile Workforce, Lone Working & Driving for Work
3.6 Confined Spaces Regulations 1997: Risk Assessment, Atmosphere Testing & Rescue Procedures
Key Takeaways Explain This Topic AI
A confined space is defined under the Confined Spaces Regulations 1997 (CSR) as any enclosed space where specified risks (fire/explosion, gas/fume/asphyxiation, high temperature, drowning, free-flowing solids) are present.
Regulation 4 of CSR 1997 establishes a statutory duty to AVOID entry into confined spaces whenever work can be accomplished from outside the space.
Atmospheric testing with calibrated multi-gas detectors must verify safe oxygen levels (19.5% to 23.5%) and check for flammable (Methane) and toxic gases (H₂S, CO) at top, middle, and bottom levels.
A dedicated Top Man (Safety Attendant) must remain stationed outside the entry point at all times to maintain communication, monitor atmospheric readings, and manage emergency protocols.
Emergency rescue plans must be fully established before entry; untrained site personnel must NEVER enter a confined space to attempt an emergency rescue.
Last updated: October 2026
Working inside confined spaces presents severe operational hazards on construction sites. Every year, workers in the UK suffer fatal injuries inside confined spaces due to toxic gas exposure, oxygen deficiency, fires, explosions, flooding, or collapse of free-flowing solids. Tragically, many confined-space victims are would-be rescuers who enter unequipped to save colleagues; in U.S. data, NIOSH estimated about one in four confined-space deaths were rescuers.
All confined space operations are legally governed by the Confined Spaces Regulations 1997 (CSR 1997) and HSE Approved Code of Practice L101 .
Statutory Definition of a Confined Space
Under Regulation 1(2) of CSR 1997, a confined space is legally defined as any place—including any vessel, tank, container, pit, trench, bund, silo, pipe, sewer, flue, well, chamber, or unventilated room—which, by virtue of its enclosed nature, presents a specified risk of serious injury or death.
The Five Statutory Specified Risks (Regulation 1(2)):
To legally constitute a confined space, the enclosed area must contain one or more of the following five specified risks:
Fire or Explosion: Arising from flammable gases, vapors, or excessive oxygen enrichment.
Loss of Consciousness Arising from Increased Body Temperature: Heat stress caused by working in hot, enclosed environments.
Loss of Consciousness or Asphyxiation: Arising from toxic gas, fumes, vapors, or oxygen depletion.
Drowning: Arising from an ingress of water or other liquid.
Asphyxiation or Entrapment: Arising from a free-flowing solid (e.g., grain, sand, gravel, cement powder, or crushed rock) or inability to reach a breathable atmosphere.
The Hierarchy of Control for Confined Spaces (Regulation 4)
Regulation 4 of CSR 1997 establishes a legal duty on employers and Site Managers to follow a strict hierarchy of control: +-------------------------------------------------------------------------+
- | Tier 1: AVOID Entry into Confined Spaces |
- | (Modify design or work methods so work is completed from outside) |
- +-------------------------------------------------------------------------+
- | (If Entry is Unavoidable)
- v
- +-------------------------------------------------------------------------+
- | Tier 2: IMPLEMENT A SAFE SYSTEM OF WORK (SSOW) & PERMIT TO WORK (PTW) |
- | (Isolate energy, purge atmosphere, test gas levels, station Top Man) |
- +-------------------------------------------------------------------------+
- | (In Parallel with Entry)
- v
- +-------------------------------------------------------------------------+
- | Tier 3: ESTABLISH EMERGENCY RESCUE ARRANGEMENTS (Regulation 5) |
- | (On-site rescue team, tripod/winch, breathing apparatus ready) |
- +-------------------------------------------------------------------------+
Primary Duty—Avoid Entry: Site Managers must first investigate whether the task can be accomplished without entering the space. Examples include cleaning tanks using high-pressure jetting nozzles mounted externally, taking samples via remote access ports, or inspecting sewers using CCTV crawlers.
Safe System of Work (SSOW): If entry is unavoidable, work must be conducted under a formal Safe System of Work and Permit to Work (PTW) system.
Atmospheric Testing and Gas Monitoring
Before any worker breaks the plane of a confined space entrance, the atmosphere must be tested using a calibrated, bump-tested multi-gas detector .
Atmospheric Testing Protocol:
Stratified Testing: Gas samples must be taken at the top, middle, and bottom of the space because different gases have different vapour densities relative to air (Air density = 1.0):
Methane ( C H 4 CH_4 C H 4 ): Lighter than air (density 0.55)—accumulates at the top/roof of the space.
Carbon Monoxide ( C O CO CO ): Equal to air (density 0.97)—distributes evenly throughout.
Hydrogen Sulfide ( H 2 S H_2S H 2 S ) & Carbon Dioxide ( C O 2 CO_2 C O 2 ): Heavier than air (density 1.19 and 1.53)—settle at the bottom/floor of the space.
Gas Concentration Thresholds:
Gas / Parameter Safe Entry Concentration Range Danger Condition & Hazards
Oxygen ( O 2 O_2 O 2 ) 19.5% to 23.5% < 19.5%: Oxygen deficiency / Asphyxiation; > 23.5%: Oxygen enrichment / Fire hazard
Hydrogen Sulfide ( H 2 S H_2S H 2 S ) < 5 ppm (STEL 10 ppm) Sewer gas. Rotten egg smell; paralyzes sense of smell instantly at >50 ppm; lethal at >100 ppm
Carbon Monoxide ( C O CO CO ) < 20 ppm (STEL 100 ppm) Colorless, odorless gas from combustion. Toxic, binds to hemoglobin
Flammable Gas (Methane) < 5% LEL (Lower Explosive Limit) > 5-10% LEL: Immediate explosion risk; entry strictly prohibited
Continuous Monitoring: Multi-gas monitors must remain switched on and worn by entrants at chest level throughout the entire duration of the work shift.
Safe System of Work and Role Responsibilities
A compliant Safe System of Work (SSOW) for confined space entry requires defined roles and equipment controls:
1. The Top Man (Safety Attendant)
A competent Top Man must be stationed immediately outside the entry access point at all times while entrants are inside .
Duties: Maintains continuous communication (verbal or radio), monitors gas readings, logs entry/exit times on the tally board, and initiates emergency rescue protocols.
CRITICAL RULE: The Top Man must NEVER enter the confined space under any circumstances , even during an emergency. Their sole duty is to raise the alarm and operate rescue retrieval gear from outside.
2. Isolation and Mechanical Ventilation
All pipelines feeding into the space must be physically isolated (blanked off or double-block-and-bled).
Electrical and mechanical agitators must be locked out ( Lockout/Tagout - LOTO ).
Mechanical forced ventilation blowers supplying clean, fresh air must operate continuously. Pure oxygen must NEVER be used to ventilate a space due to extreme explosion risks.
3. Equipment & Lighting Standards
In explosive atmospheres, all electrical tools, inspection lamps, and radios must be ATEX-certified intrinsically safe (non-sparking).
Vertical entry requires a tripod hoist system, fall arrest/retrieval winch, and full-body harnesses worn by entrants.
Emergency Rescue Procedures (Regulation 5)
Under Regulation 5 of CSR 1997, Site Managers must establish dedicated emergency rescue arrangements before entry is permitted .
Core Rescue Principles:
No Reliance on Public Emergency Services: Site Managers cannot list the 999 Fire Brigade as their primary rescue response unless pre-arranged in writing with local fire authorities who are staged on site.
Dedicated On-Site Rescue Team: Trained rescue personnel equipped with Self-Contained Breathing Apparatus (SCBA), emergency escape breathing sets (EEBD providing 10-15 minutes of air), resuscitation kits, and trauma stretchers must be on standby.
Non-Entry Retrieval: Whenever possible, rescue equipment (tripod winches connected to entrant harness lifelines) must allow the Top Man to pull an unconscious worker out of the space without entering.