Study guide
1.7 RIDDOR 2013: Reporting Over-7-Day Injuries, Specified Injuries, Occupational Diseases & Dangerous Occurrences
CITB Site Management Safety Training Scheme SMSTS
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Legal Framework, CDM 2015 & Health and Safety Management
1.1 How the SMSTS Course and Examination Actually Work 1.2 Health and Safety at Work etc. Act 1974 (HASAWA) & Statutory Duties 1.3 Management of Health and Safety at Work Regulations 1999 & HSG65 (Plan-Do-Check-Act) 1.4 CDM 2015 Overview & Five Duty Holders (Client, Principal Designer, Principal Contractor, Designer, Contractor) 1.5 CDM 2015 Project Documentation: PCI, Construction Phase Plan & Health and Safety File 1.6 Statutory Notifications (F10), Enforcement Notices (Improvement/Prohibition), and Fee for Intervention (FFI) 1.7 RIDDOR 2013: Reporting Over-7-Day Injuries, Specified Injuries, Occupational Diseases & Dangerous Occurrences
2 Chapter 2: Risk Management, RAMS & Site Safety Leadership
2.1 Principles of Risk Assessment & Five Steps to Risk Assessment 2.2 Hierarchy of Control Measures & Risk Matrices 2.3 Developing, Reviewing, and Implementing Risk Assessments & Method Statements (RAMS) 2.4 Permit to Work (PTW) Systems for High-Risk Activities 2.5 Worker Consultation, Toolbox Talks, and Safety Leadership Culture 2.6 Behavioural Safety, Human Factors, and Accident Investigation Techniques
3 Chapter 3: High-Risk Site Operations: Height, Excavations & Confined Spaces
3.1 Work at Height Regulations 2005 & Hierarchy of Control for Height Work 3.2 Scaffolding Standards (TG20, BS EN 12811) & Statutory 7-Day Inspection Regimes 3.3 Mobile Elevating Work Platforms (MEWPs), Ladders, Tower Scaffolds & Fragile Roof Safety 3.4 Excavation Safety: Preventing Ground Collapse, Shoring, Battering & Edge Protection 3.5 Underground Services Avoidance (HSG47): Cable Avoidance Tools (CAT) & Genny Operation 3.6 Confined Spaces Regulations 1997: Risk Assessment, Atmosphere Testing & Rescue Procedures 3.7 Temporary Works Management: BS 5975-1, Coordinator Roles & Permits to Load and Strike
4 Chapter 4: Occupational Health, Chemical Safety & Physical Hazards
4.1 Control of Substances Hazardous to Health (COSHH) Regulations & Exposure Limits 4.2 Respirable Crystalline Silica (RCS), Dust Control & Respiratory Protective Equipment (RPE) 4.3 Asbestos Management on Construction Sites: Control of Asbestos Regulations 2012 4.4 Noise at Work Regulations 2005 & Hand-Arm Vibration Syndrome (HAVS) Exposure Action Values 4.5 Manual Handling Operations Regulations 1992, Ergonomics & Musculoskeletal Health 4.6 Health Surveillance, Medical Fitness & Workplace Hygiene/Wellbeing 4.7 Lead in Buildings: Control of Lead at Work Regulations 2002 & Blood-Lead Surveillance 4.8 Drugs and Alcohol at Work: Legal Framework, Site Policy, Testing & Support
5 Chapter 5: Fire Safety, Electrical Protection & Plant Operations
5.1 Fire Prevention on Construction Sites (HSG168), Fire Triangle & Hot Work Permits 5.2 Fire Extinguishers, Means of Escape, LPG Storage & Emergency Evacuation Plans 5.3 Electricity at Work Regulations 1989 & Safe Isolation Procedures 5.4 110V Reduced Low Voltage Systems, RCDs & Overhead Power Lines Safety (GS6) 5.5 Provision and Use of Work Equipment Regulations 1998 (PUWER) & Equipment Inspections 5.6 Lifting Operations and Lifting Equipment Regulations 1998 (LOLER), Crane Safety & Rigging
6 Chapter 6: Site Setup, Logistics, Welfare & Environmental Protection
6.1 CDM 2015 Schedule 2 Welfare Facilities Standards & Site Setup Requirements 6.2 Site Traffic Management, Pedestrian-Vehicle Segregation & Delivery Logistics 6.3 Site Inductions, Security, Signage & Competence Verification (CSCS/CPCS) 6.4 First Aid at Work Regulations 1981: Needs Assessment, First Aiders & Equipment 6.5 Environmental Protection: Waste Management (Duty of Care), Pollution Prevention & Noise Control 6.6 Mobile Workforce, Lone Working & Driving for Work
1.7 RIDDOR 2013: Reporting Over-7-Day Injuries, Specified Injuries, Occupational Diseases & Dangerous Occurrences
Key Takeaways Explain This Topic AI
RIDDOR 2013 places statutory reporting duties on employers, self-employed persons, and persons in control of work premises
Fatalities and Specified Injuries must be reported to the HSE immediately and formally submitted via Form F2508 within 10 days
Over-7-day incapacitation injuries must be reported formally to the HSE within 15 days of the accident occurring
Reportable Dangerous Occurrences (near-misses) include scaffold collapses over 5m, crane failures, and overhead powerline contacts
All RIDDOR reportable records and accident book entries must be retained by the duty holder for at least 3 years
Last updated: August 2026
Introduction to RIDDOR 2013
The Reporting of Injuries, Diseases and Dangerous Occurrences Regulations 2013 (RIDDOR 2013) place statutory duties on employers, self-employed individuals, and persons in control of work premises ("responsible persons") to report specified workplace accidents, occupational diseases, and high-risk near-miss incidents to the Health and Safety Executive (HSE).
Reporting provides enforcing authorities with vital intelligence to target site inspections, identify dangerous trends, and investigate serious incidents across the UK construction industry.
Statutory Incident Categories & Reporting Timeframes
RIDDOR 2013 establishes five distinct categories of reportable events, each governed by strict reporting criteria and statutory deadlines.
1. Fatalities
All deaths arising out of or in connection with work must be reported immediately to the HSE Incident Contact Centre (ICC) by telephone or online. A formal written report on Form F2508 must be submitted within 10 calendar days .
2. Specified Injuries to Workers (Regulation 4)
Specified injuries occurring to workers must be notified to the HSE without delay (immediately) and followed by a formal Form F2508 report within 10 calendar days .
Under RIDDOR 2013 Regulation 4(1), Specified Injuries are defined strictly as:
Fractures, other than to fingers, thumbs, and toes.
Amputations of an arm, hand, finger, thumb, leg, foot, or toe.
Any injury likely to lead to permanent loss of sight or reduction in sight .
Any crush injury to the head or torso causing damage to the brain or internal organs.
Serious burns (covering more than 10% of the body surface, or causing severe damage to the eyes, respiratory system, or vital organs).
Any scalding requiring hospital treatment.
Loss of consciousness caused by head injury or asphyxia.
Any injury arising from working in an enclosed space leading to hypothermia or heat-induced illness , or requiring resuscitation or hospital admission for more than 24 hours .
Critical SMSTS Distinction: Excluded Fractures
Fractures to fingers, thumbs, and toes are explicitly EXCLUDED from the list of Specified Injuries. (However, if a fractured finger causes incapacitation for over 7 days, it becomes reportable as an over-7-day injury).
3. Over-7-Day Incapacitation Injuries (Regulation 4(2))
An accident must be reported under RIDDOR when an employee or self-employed worker is incapacitated and unable to perform their normal work duties for more than 7 consecutive days as a result of an occupational injury.
Counting and Reporting Rules:
The day of the accident is EXCLUDED when counting days.
Weekend days, rest days, and statutory holidays ARE INCLUDED in the 7 consecutive days.
Statutory Reporting Deadline: The formal Form F2508 report must be submitted to the HSE within 15 calendar days of the accident occurring.
Over-3-Day Injuries vs. Over-7-Day Injuries
Under UK law, an injury that results in a worker being incapacitated for more than 3 consecutive days must be recorded in the employer's internal Accident Book (Form BI 510) . However, over-3-day injuries do not need to be formally reported to the HSE under RIDDOR unless incapacitation extends past 7 consecutive days.
4. Non-Workers (Members of the Public)
Injuries to non-workers (site visitors, delivery drivers, members of the public) occurring as a result of a work-related accident must be reported to the HSE if the injured person is taken directly from the scene of the accident to a hospital for treatment of that injury.
5. Reportable Occupational Diseases (Regulations 8 & 9)
Employers and self-employed persons must report diagnoses of specified occupational diseases on Form F2508A within 10 days of receiving a formal written medical diagnosis from a doctor linking the condition to specific construction activities:
Carpal Tunnel Syndrome: Associated with handheld vibrating power tools.
Hand-Arm Vibration Syndrome (HAVS): Associated with long-term use of breakers, drills, and compactors.
Occupational Asthma: Caused by exposure to timber dust, isocyanates, or resin vapors.
Tendonitis or Tenosynovitis: Of the hand or forearm caused by repetitive manual work.
Occupational Dermatitis: Caused by contact with wet cement, epoxy resins, or solvents.
Asbestos-Related Diseases: Asbestosis, mesothelioma, and lung cancer from silica/asbestos exposure.
6. Dangerous Occurrences (Near-Misses) (Schedule 2)
Dangerous Occurrences are specified high-potential near-miss events where no actual personal injury occurred, but where the incident presented extreme risk. They must be reported to the HSE on Form F2508 within 10 calendar days .
Key construction Dangerous Occurrences listed in Schedule 2 include:
Lifting Equipment Failure: Overturning, collapse, or failure of load-bearing parts of cranes, derricks, hoists, excavators, or Mobile Elevating Work Platforms (MEWPs).
Scaffold Collapse: Complete or partial collapse of any scaffolding standing over 5 meters in height .
Overhead Electric Powerlines: Any plant, crane, excavator, or structure coming into contact with, or causing electrical discharge from, overhead electric lines.
Pressure Systems Failure: Explosion or collapse of closed vessel systems or pipelines.
Unplanned Structural Collapse: Collapse of temporary shoring, trench walls, building frames, or falsework standing over 5 meters in height .
Statutory Record-Keeping Requirements
Under Regulation 12 of RIDDOR 2013, the duty holder must retain records of all reportable incidents, specified injuries, occupational diseases, dangerous occurrences, and over-3-day injuries for at least 3 years from the date the entry was made.
Records must include: date and time of incident, personal details of injured person, location, nature of injury/disease, brief description of circumstances, and date notified to HSE.
RIDDOR 2013 Reporting Summary Matrix
- Incident Category Trigger Condition Reporting Deadline Statutory HSE Form
- Fatality Work-related death Immediate phone call; F2508 within 10 days Form F2508
Specified Injury Serious injury list (e.g., fractured femur, amputation) Immediate notification; F2508 within 10 days Form F2508
Over-7-Day Injury Worker incapacitated >7 consecutive days Within 15 days of accident Form F2508
Over-3-Day Injury Worker incapacitated >3 consecutive days Internal record only (BI 510); No HSE report Accident Book (BI 510)
- Non-Worker Injury Taken directly to hospital for treatment F2508 within 10 days Form F2508
- Occupational Disease Written medical diagnosis of work-related disease Within 10 days of diagnosis Form F2508A
Dangerous Occurrence Schedule 2 near-miss (e.g., scaffold collapse >5m) Within 10 days of occurrence Form F2508