Study guide
1.1 How the SMSTS Course and Examination Actually Work
CITB Site Management Safety Training Scheme SMSTS
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Legal Framework, CDM 2015 & Health and Safety Management
1.1 How the SMSTS Course and Examination Actually Work 1.2 Health and Safety at Work etc. Act 1974 (HASAWA) & Statutory Duties 1.3 Management of Health and Safety at Work Regulations 1999 & HSG65 (Plan-Do-Check-Act) 1.4 CDM 2015 Overview & Five Duty Holders (Client, Principal Designer, Principal Contractor, Designer, Contractor) 1.5 CDM 2015 Project Documentation: PCI, Construction Phase Plan & Health and Safety File 1.6 Statutory Notifications (F10), Enforcement Notices (Improvement/Prohibition), and Fee for Intervention (FFI) 1.7 RIDDOR 2013: Reporting Over-7-Day Injuries, Specified Injuries, Occupational Diseases & Dangerous Occurrences
2 Chapter 2: Risk Management, RAMS & Site Safety Leadership
2.1 Principles of Risk Assessment & Five Steps to Risk Assessment 2.2 Hierarchy of Control Measures & Risk Matrices 2.3 Developing, Reviewing, and Implementing Risk Assessments & Method Statements (RAMS) 2.4 Permit to Work (PTW) Systems for High-Risk Activities 2.5 Worker Consultation, Toolbox Talks, and Safety Leadership Culture 2.6 Behavioural Safety, Human Factors, and Accident Investigation Techniques
3 Chapter 3: High-Risk Site Operations: Height, Excavations & Confined Spaces
3.1 Work at Height Regulations 2005 & Hierarchy of Control for Height Work 3.2 Scaffolding Standards (TG20, BS EN 12811) & Statutory 7-Day Inspection Regimes 3.3 Mobile Elevating Work Platforms (MEWPs), Ladders, Tower Scaffolds & Fragile Roof Safety 3.4 Excavation Safety: Preventing Ground Collapse, Shoring, Battering & Edge Protection 3.5 Underground Services Avoidance (HSG47): Cable Avoidance Tools (CAT) & Genny Operation 3.6 Confined Spaces Regulations 1997: Risk Assessment, Atmosphere Testing & Rescue Procedures 3.7 Temporary Works Management: BS 5975-1, Coordinator Roles & Permits to Load and Strike
4 Chapter 4: Occupational Health, Chemical Safety & Physical Hazards
4.1 Control of Substances Hazardous to Health (COSHH) Regulations & Exposure Limits 4.2 Respirable Crystalline Silica (RCS), Dust Control & Respiratory Protective Equipment (RPE) 4.3 Asbestos Management on Construction Sites: Control of Asbestos Regulations 2012 4.4 Noise at Work Regulations 2005 & Hand-Arm Vibration Syndrome (HAVS) Exposure Action Values 4.5 Manual Handling Operations Regulations 1992, Ergonomics & Musculoskeletal Health 4.6 Health Surveillance, Medical Fitness & Workplace Hygiene/Wellbeing 4.7 Lead in Buildings: Control of Lead at Work Regulations 2002 & Blood-Lead Surveillance 4.8 Drugs and Alcohol at Work: Legal Framework, Site Policy, Testing & Support
5 Chapter 5: Fire Safety, Electrical Protection & Plant Operations
5.1 Fire Prevention on Construction Sites (HSG168), Fire Triangle & Hot Work Permits 5.2 Fire Extinguishers, Means of Escape, LPG Storage & Emergency Evacuation Plans 5.3 Electricity at Work Regulations 1989 & Safe Isolation Procedures 5.4 110V Reduced Low Voltage Systems, RCDs & Overhead Power Lines Safety (GS6) 5.5 Provision and Use of Work Equipment Regulations 1998 (PUWER) & Equipment Inspections 5.6 Lifting Operations and Lifting Equipment Regulations 1998 (LOLER), Crane Safety & Rigging
6 Chapter 6: Site Setup, Logistics, Welfare & Environmental Protection
6.1 CDM 2015 Schedule 2 Welfare Facilities Standards & Site Setup Requirements 6.2 Site Traffic Management, Pedestrian-Vehicle Segregation & Delivery Logistics 6.3 Site Inductions, Security, Signage & Competence Verification (CSCS/CPCS) 6.4 First Aid at Work Regulations 1981: Needs Assessment, First Aiders & Equipment 6.5 Environmental Protection: Waste Management (Duty of Care), Pollution Prevention & Noise Control 6.6 Mobile Workforce, Lone Working & Driving for Work
1.1 How the SMSTS Course and Examination Actually Work
Key Takeaways Explain This Topic AI
SMSTS certification requires three separate passes: all four core exercises completed, the trainer review passed, and the end-of-course examination passed — failing the trainer review bars you from even sitting the exam.
The current CITB paper is 25 questions worth 32 marks: 18 multiple-choice at one mark each plus 7 multi-response or short-written questions at two marks each.
The pass mark is 81% (26 out of 32) in 35 minutes; the widely circulated "80%, 28 out of 35, 30 minutes, five safety-critical questions" figures are the retired pre-2021 format.
The seven two-mark questions always map to CITB's seven health and safety focus areas: working at height, vehicles/pedestrians, manual handling, asbestos, dust, noise and vibration.
Only a score of 72–78% (23, 24 or 25 out of 32) earns a re-sit; below 23 marks means retaking the whole five-day course.
Last updated: August 2026
Why the Assessment Model Comes First
Almost every candidate who fails SMSTS fails for a reason that has nothing to do with construction knowledge. They coast through the group work assuming only the written paper counts, they arrive on day five expecting the pass mark quoted on a training broker's blog, or they misjudge when the book can come out during the examination. The Construction Industry Training Board (CITB) publishes the real rules in the Site Safety Plus Scheme rules – Appendix G, Site management safety training scheme (SMSTS) , currently at Version 03.04, February 2026 . Every training provider is contractually bound to deliver against that document, so it — not a course brochure — is the authority on what you must do to be certificated.
Getting on the Course
There are no formal entry qualifications . CITB expects delegates to hold, or be about to hold, the role of site manager, and recommends prior health and safety knowledge; anyone without site management experience is steered towards the two-day SSSTS (Site Supervision Safety Training Scheme) first. One entry rule is absolute: delegates must be competent in written and spoken English to the standard needed to operate at site management level. The paper contains written-answer questions, so weak written English is a genuine barrier rather than an administrative footnote.
The course runs for five days and a minimum of 37 hours 30 minutes of contact time, excluding breaks. It can be delivered by day release (one or two days per week, up to five weeks, extending to six where bank holidays interrupt), as half days requiring 40 total contact hours , or as evening classes requiring 42 hours — the extra hours compensate for the start-stop nature of split delivery. Miss part of a day and you must redo that whole day within 30 days; miss part of day one and you start the entire course again. Class sizes are capped at 20 delegates face-to-face and 12 for remote delivery , with a minimum of four.
Two publications are mandatory and are yours to keep: the Construction site management delegate workbook (XA6) and Construction site safety – The comprehensive guide (GE700) . Both matter for the exam, as you will see below.
Three Hurdles, Not One
To be certificated you must do all three of the following. There is no compensation between them — strength in one does not offset failure in another.
Assessment component What it is Pass condition
Four core exercises Structured group tasks built around the CITB construction site drawings, tasks and projects (for example implementing legislation, manager and supervisor responsibilities, a site briefing, and site layout) All four must be completed
Trainer review The trainer's pass/fail judgement of your performance and engagement in the core exercises and across the course overall, assessed against the Trainer reference (XA6T) Pass
End-of-course examination A 25-question paper set and supplied by CITB, covering all aspects of the course 26 out of 32 marks (81%)
The sequencing detail catches people out: the trainer review must be completed before the examination , and a delegate assessed as failing it is not permitted to sit the paper at all . Sitting quietly for five days and hoping the written paper carries you is therefore not a viable strategy. Contribute to the group work, speak up, and finish every core exercise.
Anatomy of the Examination Paper
The paper is fixed in structure, and the mark arithmetic is worth memorising because it explains where the risk sits.
- Question type Number Marks each Total marks
- Multiple choice 18 1 18
- Multi-response or short written answer 7 2 14
- Total 25 — 32
You need 26 of those 32 marks . That leaves a margin of only six marks , and because the written questions carry double weight, dropping three of them alone consumes your entire allowance. The paper lasts 35 minutes — roughly 1 minute 24 seconds per question — so pace matters.
The Seven Focus Areas
The seven two-mark questions are not distributed randomly. CITB states that they all relate to the seven health and safety focus areas , which are chosen because they are founded on construction ill-health, injury and fatality statistics:
- Working at height
- Vehicles/pedestrians
- Manual handling
- Asbestos
- Dust
- Noise
- Vibration
This is the single most useful piece of exam intelligence in the scheme rules. Fourteen of the 32 available marks — 44% of the paper — sit in those seven topics. If your revision time is limited, weight it towards Chapters 3 and 4 of this guide (work at height, dust and silica, asbestos, noise and vibration, manual handling) and the traffic management material in Chapter 6.
Open Book, But Only at the End
Delegates may use the GE700 comprehensive guide and the XA6 delegate workbook for the last 15 minutes of the 35-minute examination. The first 20 minutes are effectively closed-book. The practical implication is a deliberate exam technique: answer everything you know from memory first, flag the questions where you need a figure or a definition, and use the final 15 minutes to look those up. Tabbing your GE700 during the week — welfare tables, inspection intervals, exposure action values — converts that 15 minutes from panicked page-flipping into recovered marks.
Re-sits and What Happens if You Fail
A re-sit is not automatic. You qualify for one further attempt only if you have completed the four core exercises, passed the trainer review, and scored between 72% and 78% — that is 23, 24 or 25 out of 32 . Score 22 or below and there is no re-sit; you must take the whole five-day course again.
If you do qualify, the re-sit may be offered on the same day provided you agree and are given adequate preparation time, or you may sit a dedicated re-sit paper within 30 days by joining the final day of another course. You do not repeat the taught course. Providers may charge for this at their discretion. Fail the re-sit — anything below 26 out of 32 — and the full course must be retaken.
Correcting the Figures You Will See Online
Search for "SMSTS exam" and you will repeatedly find "25 questions, 20 multiple choice plus 5 short written, 30 minutes, marked out of 35, pass 80%, five safety-critical questions that must all be answered correctly". Those figures are obsolete. They describe the pre-2021 SMSTS paper and have been superseded in every published revision of Appendix G since. Two specific confusions are worth naming:
The "safety-critical questions" rule belongs to SSSTS, not SMSTS. The current SSSTS paper (Appendix C) has 22 multiple-choice plus 3 short-written questions, a 24-out-of-30 pass mark, and four safety-critical questions that must all be correct . SMSTS has no such all-or-nothing question class; it has the seven focus-area questions, which are worth double marks but are not individually fatal.
80% is the wrong pass mark. CITB's Principal Scheme Rules duration-and-pass-mark table sets SMSTS and SMSTS-R at 81% , while HSA sits at 83% and SSSTS, SSSTS-R, DRHS and SEATS sit at 80%. The 81% figure is not a rounding artefact — it is 26 out of 32.
Getting this right matters beyond trivia. A candidate revising to an imagined "must get five questions perfect" rule budgets time badly and panics over the wrong items; a candidate who knows that 44% of the marks live in seven named topics revises where the marks are.
After the Certificate
The SMSTS certificate is valid for five years . To stay in the scheme you must complete the two-day SMSTS Refresher (SMSTS-R) , which is a minimum of 15 contact hours, before your existing certificate expires . Let it lapse and you re-enter the scheme by sitting the full five-day course again. The refresher paper follows the same 18 + 7 structure, the same 26-out-of-32 pass mark, and the same seven focus areas, but runs to 35 minutes with GE700 only (no XA6) for the last 15 minutes.
One useful piece of reciprocity: CITB confirms that the SMSTS certificate is accepted in place of Health and Safety Awareness (HSA), SSSTS and SSSTS-R . A current SMSTS holder does not need to hold those separately.