Study guide
4.6 Health Surveillance, Medical Fitness & Workplace Hygiene/Wellbeing
CITB Site Management Safety Training Scheme SMSTS
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Legal Framework, CDM 2015 & Health and Safety Management
1.1 How the SMSTS Course and Examination Actually Work 1.2 Health and Safety at Work etc. Act 1974 (HASAWA) & Statutory Duties 1.3 Management of Health and Safety at Work Regulations 1999 & HSG65 (Plan-Do-Check-Act) 1.4 CDM 2015 Overview & Five Duty Holders (Client, Principal Designer, Principal Contractor, Designer, Contractor) 1.5 CDM 2015 Project Documentation: PCI, Construction Phase Plan & Health and Safety File 1.6 Statutory Notifications (F10), Enforcement Notices (Improvement/Prohibition), and Fee for Intervention (FFI) 1.7 RIDDOR 2013: Reporting Over-7-Day Injuries, Specified Injuries, Occupational Diseases & Dangerous Occurrences
2 Chapter 2: Risk Management, RAMS & Site Safety Leadership
2.1 Principles of Risk Assessment & Five Steps to Risk Assessment 2.2 Hierarchy of Control Measures & Risk Matrices 2.3 Developing, Reviewing, and Implementing Risk Assessments & Method Statements (RAMS) 2.4 Permit to Work (PTW) Systems for High-Risk Activities 2.5 Worker Consultation, Toolbox Talks, and Safety Leadership Culture 2.6 Behavioural Safety, Human Factors, and Accident Investigation Techniques
3 Chapter 3: High-Risk Site Operations: Height, Excavations & Confined Spaces
3.1 Work at Height Regulations 2005 & Hierarchy of Control for Height Work 3.2 Scaffolding Standards (TG20, BS EN 12811) & Statutory 7-Day Inspection Regimes 3.3 Mobile Elevating Work Platforms (MEWPs), Ladders, Tower Scaffolds & Fragile Roof Safety 3.4 Excavation Safety: Preventing Ground Collapse, Shoring, Battering & Edge Protection 3.5 Underground Services Avoidance (HSG47): Cable Avoidance Tools (CAT) & Genny Operation 3.6 Confined Spaces Regulations 1997: Risk Assessment, Atmosphere Testing & Rescue Procedures 3.7 Temporary Works Management: BS 5975-1, Coordinator Roles & Permits to Load and Strike
4 Chapter 4: Occupational Health, Chemical Safety & Physical Hazards
4.1 Control of Substances Hazardous to Health (COSHH) Regulations & Exposure Limits 4.2 Respirable Crystalline Silica (RCS), Dust Control & Respiratory Protective Equipment (RPE) 4.3 Asbestos Management on Construction Sites: Control of Asbestos Regulations 2012 4.4 Noise at Work Regulations 2005 & Hand-Arm Vibration Syndrome (HAVS) Exposure Action Values 4.5 Manual Handling Operations Regulations 1992, Ergonomics & Musculoskeletal Health 4.6 Health Surveillance, Medical Fitness & Workplace Hygiene/Wellbeing 4.7 Lead in Buildings: Control of Lead at Work Regulations 2002 & Blood-Lead Surveillance 4.8 Drugs and Alcohol at Work: Legal Framework, Site Policy, Testing & Support
5 Chapter 5: Fire Safety, Electrical Protection & Plant Operations
5.1 Fire Prevention on Construction Sites (HSG168), Fire Triangle & Hot Work Permits 5.2 Fire Extinguishers, Means of Escape, LPG Storage & Emergency Evacuation Plans 5.3 Electricity at Work Regulations 1989 & Safe Isolation Procedures 5.4 110V Reduced Low Voltage Systems, RCDs & Overhead Power Lines Safety (GS6) 5.5 Provision and Use of Work Equipment Regulations 1998 (PUWER) & Equipment Inspections 5.6 Lifting Operations and Lifting Equipment Regulations 1998 (LOLER), Crane Safety & Rigging
6 Chapter 6: Site Setup, Logistics, Welfare & Environmental Protection
6.1 CDM 2015 Schedule 2 Welfare Facilities Standards & Site Setup Requirements 6.2 Site Traffic Management, Pedestrian-Vehicle Segregation & Delivery Logistics 6.3 Site Inductions, Security, Signage & Competence Verification (CSCS/CPCS) 6.4 First Aid at Work Regulations 1981: Needs Assessment, First Aiders & Equipment 6.5 Environmental Protection: Waste Management (Duty of Care), Pollution Prevention & Noise Control 6.6 Mobile Workforce, Lone Working & Driving for Work
4.6 Health Surveillance, Medical Fitness & Workplace Hygiene/Wellbeing
Key Takeaways Explain This Topic AI
Statutory health surveillance is required under COSHH, Noise, Vibration, and Asbestos regulations whenever workers are exposed to identified health hazards exceeding statutory trigger values.
Health surveillance involves ongoing, systematic health checks (e.g. lung spirometry, skin inspections, HAVS tier 1-4 checks, audiometric testing) conducted by competent occupational health professionals.
Under CDM 2015 Schedule 2, principal contractors and site managers must provide clean, fully equipped welfare facilities (toilets, hot/cold washing facilities, rest rooms, drinking water) from day one of site operations.
RIDDOR 2013 requires employers to formally report specified occupational diseases (such as HAVS, carpal tunnel syndrome, occupational dermatitis, occupational asthma, and asbestos-related diseases) upon written doctor diagnosis.
Mental health and wellbeing initiatives are critical in construction, where male site worker suicide rates are statistically three to four times higher than the UK national average.
Last updated: August 2026
Introduction to Health Surveillance and Occupational Health
While safety management addresses immediate accidental trauma, occupational health management focuses on preventing work-related ill health, chronic diseases, and systemic organ damage. Health Surveillance is a system of ongoing health checks and medical examinations legally required to monitor workers exposed to specific health hazards on construction sites.
The primary objectives of health surveillance are:
Early Detection: Identify early, reversible signs of occupational ill health before permanent disability occurs.
Evaluate Control Effectiveness: Provide feedback on whether existing site engineering controls and RPE/PPE are functioning effectively.
Data Collection: Identify workplace trends, hazardous processes, or failing safety protocols.
Statutory Triggers for Health Surveillance
Health surveillance is not an optional wellness check; it is a strict statutory requirement triggered under UK legislation when workers are exposed to specific occupational hazards:
1. Control of Substances Hazardous to Health (COSHH)
Required when workers are exposed to known respiratory sensitizers (isocyanates, hardwood dust, solder flux), skin sensitizers (epoxy resins, chromates in Portland cement), lead, or Respirable Crystalline Silica (RCS).
Testing Methods: Spirometry (lung function testing), biological monitoring (blood/urine testing for lead or solvents), and annual dermatological skin checks.
2. Control of Noise at Work Regulations 2005
Required for all workers regularly exposed to sound levels at or above the Upper Exposure Action Value (85 dBA) .
Testing Method: Regular audiometric testing (pure-tone hearing tests) performed in a mobile acoustic booth by an occupational health nurse.
3. Control of Vibration at Work Regulations 2005
Required for all operatives exposed to vibration at or above the Daily Exposure Action Value (2.5 m/s² / 100 points) .
Testing Structure: Tiered HAVS assessment system (Tier 1 annual questionnaire, Tier 2 nurse assessment, Tier 3 doctor clinical examination, Tier 4 formal diagnostic testing).
4. Control of Asbestos Regulations 2012
Required for workers undertaking Licensed Asbestos Work or Notifiable Non-Licensed Work (NNLW).
Testing Method: Respiratory medical examination by an HSE-Appointed Doctor at least every 2 to 3 years , with health records retained for 40 years .
Safety-Critical Work (SCW) and Medical Fitness Assessments
Certain construction roles carry extreme risk where sudden illness, physical incapacity, or impaired reaction times could result in catastrophic multi-fatality accidents. Workers in these roles are designated as Safety-Critical Workers (SCW) .
Examples of Safety-Critical Roles
Mobile plant operators (excavators, dumpers, rollers, telehandlers).
Tower crane and mobile crane operators.
Scaffolders, steel erectors, and steeplejacks (high-risk work at height).
Confined space entrants and rescue teams.
Site electrical engineers working on high-voltage plant.
Medical Fitness Screening Standards
Before placing operatives in safety-critical roles, site managers must ensure they undergo a formal Safety-Critical Medical Assessment conducted by an occupational health specialist. Screening includes:
Vision and Hearing: Distance acuity, color vision (Ishihara test for electricians and crane signalers), and audiometry.
Cardiovascular & Metabolic Health: Blood pressure, resting heart rate, ECG, and diabetes screening (HbA1c).
Neurological Fitness: Screening for epilepsy, blackouts, vertigo, or balance disorders.
Substance Misuse Screening: Pre-employment and random drug and alcohol testing.
Statutory Site Welfare Facilities: CDM 2015 Schedule 2
Under the Construction (Design and Management) Regulations 2015 (CDM 2015) Schedule 2 , principal contractors and site managers have an absolute legal duty to provide suitable and sufficient welfare facilities from day one of site setup before any construction work begins.
Mandatory Welfare Requirements
Welfare Facility Statutory CDM 2015 Schedule 2 Requirements
Sanitary Conveniences (Toilets) Adequate number of flush toilets connected to mains drainage or sealed chemical tanks. Rooms must be clean, illuminated, ventilated, lockable, and provided with toilet paper. Separate facilities for men and women unless in lockable single-occupancy rooms.
Washing Facilities Located adjacent to toilets and changing rooms. Must include running hot and cold (or warm) water , soap or effective skin cleansers, and hygienic towels or hand dryers. Basins must be large enough to wash forearms.
Drinking Water Wholesome supply of clean drinking water, easily accessible, clearly marked with warning signs, and supplied with clean drinking cups.
Rest Facilities Enclosed, weather-tight rest rooms equipped with tables and seating with backs. Must be adequately heated, ventilated, clean, and positioned away from hazardous work areas. Facilities to boil water and heat food must be provided. Smoking and vaping must be prohibited.
Changing Rooms & Lockers Provided where workers must wear specialized protective clothing. Must include drying facilities for wet site clothing and separate storage for personal clothing away from contaminated workwear.
Reporting Occupational Diseases under RIDDOR 2013
Under the Reporting of Injuries, Diseases and Dangerous Occurrences Regulations 2013 (RIDDOR) , site managers and employers must formally report specified work-related medical conditions to the HSE.
The 8 Statutory Reportable Occupational Diseases
Carpal Tunnel Syndrome: Severe wrist nerve compression from vibrating hand tools.
Severe Cramp of the Hand or Forearm: Caused by repetitive hand movements.
Occupational Dermatitis: Skin inflammation caused by cement, solvents, or epoxy resins.
Hand-Arm Vibration Syndrome (HAVS): Permanent vascular or neurological damage from vibrating tools.
Occupational Asthma: Respiratory sensitisation caused by isocyanates, timber dust, or flux.
Tendonitis or Tenosynovitis: Inflammation of hand or forearm tendons.
Occupational Cancer: Cancers linked to occupational exposures (e.g. mesothelioma, lung cancer from silica/asbestos).
Disease from Biological Agents: Infections contracted during work (e.g. Weil's disease, Legionellosis).
Reporting Trigger: A disease becomes reportable under RIDDOR strictly when the employer receives a formal written medical diagnosis from a registered medical practitioner (doctor) confirming that the worker suffers from a listed condition linked to their occupation. Reports must be submitted online via HSE Form F2508A.
Workplace Wellbeing and Mental Health in Construction
Occupational health encompasses psychological wellbeing alongside physical safety. The UK construction industry faces a profound mental health crisis:
Industry Mental Health Statistics
Suicide Rates: Male construction site operatives are statistically 3 to 4 times more likely to die by suicide than the UK national male average.
Causes of Stress: Long working hours, living away from family in temporary lodgings, tight financial pressures, physical fatigue, job insecurity, and a traditional culture of stigma around emotional vulnerability.
Site Management Wellbeing Action Plan
Site managers play a pivotal role in creating a supportive, mentally healthy site environment:
Mental Health First Aiders (MHFAs): Train site supervisors and operatives as certified MHFAs to recognize signs of anxiety, depression, and acute distress.
Employee Assistance Programs (EAPs): Provide free, confidential helpline access for counseling and financial advice.
Promote Open Communication: Conduct regular toolbox talks on mental health and stress management to shatter stigma.
Compassionate Work Scheduling: Manage overtime, ensure adequate weekend rest breaks, and maintain clean, comfortable site rest facilities.