Study guide

4.7 Lead in Buildings: Control of Lead at Work Regulations 2002 & Blood-Lead Surveillance

CITB Site Management Safety Training Scheme SMSTS

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Legal Framework, CDM 2015 & Health and Safety Management

1.1 How the SMSTS Course and Examination Actually Work 1.2 Health and Safety at Work etc. Act 1974 (HASAWA) & Statutory Duties 1.3 Management of Health and Safety at Work Regulations 1999 & HSG65 (Plan-Do-Check-Act) 1.4 CDM 2015 Overview & Five Duty Holders (Client, Principal Designer, Principal Contractor, Designer, Contractor) 1.5 CDM 2015 Project Documentation: PCI, Construction Phase Plan & Health and Safety File 1.6 Statutory Notifications (F10), Enforcement Notices (Improvement/Prohibition), and Fee for Intervention (FFI) 1.7 RIDDOR 2013: Reporting Over-7-Day Injuries, Specified Injuries, Occupational Diseases & Dangerous Occurrences

2 Chapter 2: Risk Management, RAMS & Site Safety Leadership

2.1 Principles of Risk Assessment & Five Steps to Risk Assessment 2.2 Hierarchy of Control Measures & Risk Matrices 2.3 Developing, Reviewing, and Implementing Risk Assessments & Method Statements (RAMS) 2.4 Permit to Work (PTW) Systems for High-Risk Activities 2.5 Worker Consultation, Toolbox Talks, and Safety Leadership Culture 2.6 Behavioural Safety, Human Factors, and Accident Investigation Techniques

3 Chapter 3: High-Risk Site Operations: Height, Excavations & Confined Spaces

3.1 Work at Height Regulations 2005 & Hierarchy of Control for Height Work 3.2 Scaffolding Standards (TG20, BS EN 12811) & Statutory 7-Day Inspection Regimes 3.3 Mobile Elevating Work Platforms (MEWPs), Ladders, Tower Scaffolds & Fragile Roof Safety 3.4 Excavation Safety: Preventing Ground Collapse, Shoring, Battering & Edge Protection 3.5 Underground Services Avoidance (HSG47): Cable Avoidance Tools (CAT) & Genny Operation 3.6 Confined Spaces Regulations 1997: Risk Assessment, Atmosphere Testing & Rescue Procedures 3.7 Temporary Works Management: BS 5975-1, Coordinator Roles & Permits to Load and Strike

4 Chapter 4: Occupational Health, Chemical Safety & Physical Hazards

4.1 Control of Substances Hazardous to Health (COSHH) Regulations & Exposure Limits 4.2 Respirable Crystalline Silica (RCS), Dust Control & Respiratory Protective Equipment (RPE) 4.3 Asbestos Management on Construction Sites: Control of Asbestos Regulations 2012 4.4 Noise at Work Regulations 2005 & Hand-Arm Vibration Syndrome (HAVS) Exposure Action Values 4.5 Manual Handling Operations Regulations 1992, Ergonomics & Musculoskeletal Health 4.6 Health Surveillance, Medical Fitness & Workplace Hygiene/Wellbeing 4.7 Lead in Buildings: Control of Lead at Work Regulations 2002 & Blood-Lead Surveillance 4.8 Drugs and Alcohol at Work: Legal Framework, Site Policy, Testing & Support

5 Chapter 5: Fire Safety, Electrical Protection & Plant Operations

5.1 Fire Prevention on Construction Sites (HSG168), Fire Triangle & Hot Work Permits 5.2 Fire Extinguishers, Means of Escape, LPG Storage & Emergency Evacuation Plans 5.3 Electricity at Work Regulations 1989 & Safe Isolation Procedures 5.4 110V Reduced Low Voltage Systems, RCDs & Overhead Power Lines Safety (GS6) 5.5 Provision and Use of Work Equipment Regulations 1998 (PUWER) & Equipment Inspections 5.6 Lifting Operations and Lifting Equipment Regulations 1998 (LOLER), Crane Safety & Rigging

6 Chapter 6: Site Setup, Logistics, Welfare & Environmental Protection

6.1 CDM 2015 Schedule 2 Welfare Facilities Standards & Site Setup Requirements 6.2 Site Traffic Management, Pedestrian-Vehicle Segregation & Delivery Logistics 6.3 Site Inductions, Security, Signage & Competence Verification (CSCS/CPCS) 6.4 First Aid at Work Regulations 1981: Needs Assessment, First Aiders & Equipment 6.5 Environmental Protection: Waste Management (Duty of Care), Pollution Prevention & Noise Control 6.6 Mobile Workforce, Lone Working & Driving for Work

4.7 Lead in Buildings: Control of Lead at Work Regulations 2002 & Blood-Lead Surveillance

Key Takeaways Explain This Topic AI

Lead is excluded from COSHH and is governed instead by the Control of Lead at Work Regulations 2002 (CLAW), alongside asbestos and ionising radiation which have their own dedicated regimes.

The occupational exposure limit for lead other than lead alkyls is 0.15 mg/m³; for lead alkyls it is 0.10 mg/m³.

Where exposure is significant, employers must place workers under medical surveillance by an HSE appointed doctor, including blood-lead monitoring.

Current suspension levels are 60 µg/dl for most employees, 50 µg/dl for young workers under 18, and 30 µg/dl for women of reproductive capacity; the corresponding action levels are 50, 40 and 25 µg/dl.

The highest-risk construction activities are hot work on lead (burning, welding, soldering), dry abrasion or blasting of old lead paint, and demolition or refurbishment of pre-1992 buildings.

Last updated: August 2026

Why Lead Has Its Own Regulations

Section 4.1 established that a small group of substances is deliberately carved out of the Control of Substances Hazardous to Health (COSHH) Regulations 2002 because each needs a bespoke regime: asbestos under CAR 2012, radioactive substances under the Ionising Radiations Regulations 2017, and lead under the Control of Lead at Work Regulations 2002 (CLAW) . CITB lists lead as a separate learning outcome in Module 2 of the SMSTS syllabus, and it deserves the space. Lead is a cumulative systemic poison: it is absorbed by inhalation and ingestion, stored in bone, and released back into blood over years. Its effects — anaemia, kidney damage, nervous system damage, raised blood pressure and impaired fertility — build silently, so the worker who is being harmed feels fine.

The site management problem is that lead is almost never on the job description. It arrives inside other tasks: stripping a roof, burning off paint, cutting out old pipework, demolishing a Victorian terrace.

Where Lead Turns Up on UK Sites

Source Typical location Activity that releases it

Lead-based paint Pre-1992 domestic and commercial decoration, especially pre-1970s; window frames, doors, stairs, railings, steelwork Dry sanding, power sanding, needle-gunning, abrasive blasting, burning off with a hot air gun or torch

Lead sheet and flashing Roofs, valleys, parapets, chimney flashings, bay-window tops Hot work, lead welding ("lead burning"), cutting, stripping for scrap

Lead pipework and lead-lined tanks Pre-1970 water services, laboratory and hospital drainage Cutting, hot-work jointing, wiped-solder joint disturbance

  • Leaded solder Older plumbing, electrical and roofing work Soldering, desoldering, hot work
  • Lead-sheathed cables Older buried and building electrical services Cutting and stripping
  • Stained and leaded glass Churches, heritage and conservation projects Reglazing, cutting, hot work on cames

Contaminated land and dust Former industrial sites, shooting ranges, old paint-stripping yards Excavation, muck-shifting, dry sweeping

A pattern is visible: heat and abrasion are the two mechanisms that turn stable lead into a respirable fume or dust. Lead fume is generated above roughly 500°C, which any oxy-fuel torch, hot air gun or welding process comfortably exceeds. Cold, undisturbed lead sheet on a roof is not an exposure risk; the same sheet being cut with a disc cutter is.

The CLAW 2002 Duty Structure

CLAW imposes a familiar hierarchy but with tighter, prescriptive additions:

Assess the risk before work starts — identify whether lead is present (a refurbishment and demolition survey, paint sampling, or building age and construction), what form it is in, and whether the planned method will disturb it.

Prevent exposure where reasonably practicable — substitute lead-free materials, remove components intact rather than cutting them in situ, use chemical strippers or infrared systems instead of burning off, or engage a specialist contractor.

Control exposure where prevention is not reasonably practicable — local exhaust ventilation, on-tool extraction, wet methods, enclosure, and only then respiratory protective equipment with face-fit testing.

Prohibit eating, drinking and smoking in any area where lead exposure could occur. This is not housekeeping advice; ingestion from contaminated hands is a major route of lead uptake , and it is the route most often underestimated on site.

Provide washing and changing facilities and separate storage for contaminated work clothing. Lead dust taken home on overalls has poisoned workers' children — a documented UK phenomenon known as take-home exposure.

Air monitoring where required to check the effectiveness of controls.

Medical surveillance by an HSE appointed doctor where exposure is significant.

Information, instruction and training for every exposed worker, and maintenance of records.

  • The Numbers You Must Know
  • Occupational exposure limit in air
  • Form of lead Occupational exposure limit (8-hour TWA)
  • Lead other than lead alkyls 0.15 mg/m³
  • Lead alkyls (e.g. tetraethyl lead) 0.10 mg/m³

Note how much higher these are than the workplace exposure limit for respirable crystalline silica (0.1 mg/m³) covered in Section 4.2 — but unlike silica, lead also has a biological monitoring regime, because air sampling alone does not capture the ingestion route.

Significant exposure

Exposure is treated as significant — triggering the full regime including medical surveillance — where any of the following applies: air concentration exceeds half the occupational exposure limit ; there is a substantial risk of ingestion ; or there is a risk of skin contact with a readily absorbed form such as a lead alkyl. The "half the limit" trigger is easy to miss: you can be well inside the legal air limit and still be required to place workers under surveillance.

Blood-lead action and suspension levels

Biological monitoring measures blood-lead concentration in micrograms per decilitre (µg/dl) . Two thresholds matter, and they differ by worker group:

Worker group Action level (investigate the cause, review controls, reduce exposure) Suspension level (worker removed from lead work)

  • Most employees 50 µg/dl 60 µg/dl
  • Young workers under 18 40 µg/dl 50 µg/dl
  • Women of reproductive capacity 25 µg/dl 30 µg/dl

The action level is a management trigger, not a limit: the employer must immediately determine why the level rose, review the controls, and take steps to bring it down. The suspension level is a medical decision by the appointed doctor to remove the worker from lead work entirely.

Women of reproductive capacity have the lowest thresholds because lead crosses the placenta and is a reproductive toxin. CLAW also restricts the employment of young persons and women of reproductive capacity in certain high-exposure lead processes.

Appointed doctors must report blood-lead results and any suspensions to HSE annually , and health records must be kept for 40 years — the same retention period as for asbestos and other long-latency exposures.

A change on the horizon — but not yet in force

HSE has been consulting on substantially lowering these thresholds, on the evidence that harm occurs well below the 2002 figures — effects on blood, nervous system and kidneys have been observed above 40 µg/dl, and raised blood pressure in middle-aged men around 30 µg/dl. Proposals discussed have included staged reductions of the general suspension level from 60 µg/dl towards 30 and then 15 µg/dl, with corresponding reductions in action levels and a much lower threshold for workers capable of conceiving. None of this is law yet. For examination and site purposes, the figures in the table above are the ones currently in force under CLAW 2002. This is a good illustration of the SMSTS habit of checking whether a rule you have heard about is actually in force or merely proposed.

Practical Site Controls for the Common Case

The single most common construction lead scenario is removing or disturbing old paint during refurbishment . The control decision follows the hierarchy:

Eliminate: leave sound, intact lead paint in place and overcoat it, or remove the whole component off site for controlled treatment.

Substitute the method: chemical or infrared paint removal generates neither fume nor fine dust, unlike burning, blasting or dry sanding. Choosing the method is a design and planning decision that belongs in the risk assessment, not a decision for the operative with the hot air gun.

Engineer: on-tool extraction fitted with an H-class filter (as covered for silica in Section 4.2), full enclosure with negative pressure for large-scale removal, and wet methods where compatible with the substrate.

Administrative: restrict access, exclude non-essential workers, prohibit eating and smoking, enforce hand washing before every break, and use disposable coveralls and a designated changing area.

RPE last: face-fit tested, with the assigned protection factor matched to the measured or predicted exposure.

The manager's test question when a refurbishment method statement lands on the desk is simple: does this method heat or abrade a surface that may contain lead, and if so where is the CLAW assessment? If the answer is silence, the work does not start.