Study guide

4.4 Noise at Work Regulations 2005 & Hand-Arm Vibration Syndrome (HAVS) Exposure Action Values

CITB Site Management Safety Training Scheme SMSTS

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Legal Framework, CDM 2015 & Health and Safety Management

1.1 How the SMSTS Course and Examination Actually Work 1.2 Health and Safety at Work etc. Act 1974 (HASAWA) & Statutory Duties 1.3 Management of Health and Safety at Work Regulations 1999 & HSG65 (Plan-Do-Check-Act) 1.4 CDM 2015 Overview & Five Duty Holders (Client, Principal Designer, Principal Contractor, Designer, Contractor) 1.5 CDM 2015 Project Documentation: PCI, Construction Phase Plan & Health and Safety File 1.6 Statutory Notifications (F10), Enforcement Notices (Improvement/Prohibition), and Fee for Intervention (FFI) 1.7 RIDDOR 2013: Reporting Over-7-Day Injuries, Specified Injuries, Occupational Diseases & Dangerous Occurrences

2 Chapter 2: Risk Management, RAMS & Site Safety Leadership

2.1 Principles of Risk Assessment & Five Steps to Risk Assessment 2.2 Hierarchy of Control Measures & Risk Matrices 2.3 Developing, Reviewing, and Implementing Risk Assessments & Method Statements (RAMS) 2.4 Permit to Work (PTW) Systems for High-Risk Activities 2.5 Worker Consultation, Toolbox Talks, and Safety Leadership Culture 2.6 Behavioural Safety, Human Factors, and Accident Investigation Techniques

3 Chapter 3: High-Risk Site Operations: Height, Excavations & Confined Spaces

3.1 Work at Height Regulations 2005 & Hierarchy of Control for Height Work 3.2 Scaffolding Standards (TG20, BS EN 12811) & Statutory 7-Day Inspection Regimes 3.3 Mobile Elevating Work Platforms (MEWPs), Ladders, Tower Scaffolds & Fragile Roof Safety 3.4 Excavation Safety: Preventing Ground Collapse, Shoring, Battering & Edge Protection 3.5 Underground Services Avoidance (HSG47): Cable Avoidance Tools (CAT) & Genny Operation 3.6 Confined Spaces Regulations 1997: Risk Assessment, Atmosphere Testing & Rescue Procedures 3.7 Temporary Works Management: BS 5975-1, Coordinator Roles & Permits to Load and Strike

4 Chapter 4: Occupational Health, Chemical Safety & Physical Hazards

4.1 Control of Substances Hazardous to Health (COSHH) Regulations & Exposure Limits 4.2 Respirable Crystalline Silica (RCS), Dust Control & Respiratory Protective Equipment (RPE) 4.3 Asbestos Management on Construction Sites: Control of Asbestos Regulations 2012 4.4 Noise at Work Regulations 2005 & Hand-Arm Vibration Syndrome (HAVS) Exposure Action Values 4.5 Manual Handling Operations Regulations 1992, Ergonomics & Musculoskeletal Health 4.6 Health Surveillance, Medical Fitness & Workplace Hygiene/Wellbeing 4.7 Lead in Buildings: Control of Lead at Work Regulations 2002 & Blood-Lead Surveillance 4.8 Drugs and Alcohol at Work: Legal Framework, Site Policy, Testing & Support

5 Chapter 5: Fire Safety, Electrical Protection & Plant Operations

5.1 Fire Prevention on Construction Sites (HSG168), Fire Triangle & Hot Work Permits 5.2 Fire Extinguishers, Means of Escape, LPG Storage & Emergency Evacuation Plans 5.3 Electricity at Work Regulations 1989 & Safe Isolation Procedures 5.4 110V Reduced Low Voltage Systems, RCDs & Overhead Power Lines Safety (GS6) 5.5 Provision and Use of Work Equipment Regulations 1998 (PUWER) & Equipment Inspections 5.6 Lifting Operations and Lifting Equipment Regulations 1998 (LOLER), Crane Safety & Rigging

6 Chapter 6: Site Setup, Logistics, Welfare & Environmental Protection

6.1 CDM 2015 Schedule 2 Welfare Facilities Standards & Site Setup Requirements 6.2 Site Traffic Management, Pedestrian-Vehicle Segregation & Delivery Logistics 6.3 Site Inductions, Security, Signage & Competence Verification (CSCS/CPCS) 6.4 First Aid at Work Regulations 1981: Needs Assessment, First Aiders & Equipment 6.5 Environmental Protection: Waste Management (Duty of Care), Pollution Prevention & Noise Control 6.6 Mobile Workforce, Lone Working & Driving for Work

4.4 Noise at Work Regulations 2005 & Hand-Arm Vibration Syndrome (HAVS) Exposure Action Values

Key Takeaways Explain This Topic AI

The Control of Noise at Work Regulations 2005 set Lower Exposure Action Values (80 dBA daily), Upper Exposure Action Values (85 dBA daily), and Maximum Exposure Limit Values (87 dBA daily taking hearing protection into account).

At the Upper Exposure Action Value (85 dBA), site managers must establish mandatory Hearing Protection Zones (HPZs), enforce the wearing of hearing protection, and provide health surveillance.

The Control of Vibration at Work Regulations 2005 set the Hand-Arm Vibration (HAV) Daily Exposure Action Value (EAV) at 2.5 m/s² A(8) and the Daily Exposure Limit Value (ELV) at 5.0 m/s² A(8).

Using the HSE HAVS exposure points system, 100 points represents the Daily Exposure Action Value (EAV), while 400 points represents the absolute statutory Exposure Limit Value (ELV).

Hand-Arm Vibration Syndrome (HAVS) causes irreversible neurological, vascular (Vibration White Finger), and musculoskeletal destruction in the hands and arms of vibrating tool operators.

Last updated: August 2026

Regulatory Overview: Control of Noise at Work Regulations 2005

Noise-Induced Hearing Loss (NIHL) and tinnitus (permanent ringing in the ears) are irreversible occupational health conditions affecting thousands of construction workers. High sound levels damage the delicate hair cells (stereocilia) within the cochlea of the inner ear. Because hearing loss occurs gradually over years without physical pain, workers often fail to recognize the damage until permanent disability occurs.

The statutory legislation governing occupational sound levels is the Control of Noise at Work Regulations 2005 . The regulations require employers to prevent or reduce risks to health and safety from exposure to noise at work.

Measuring Sound Energy on Construction Sites

Sound pressure levels are measured in decibels (dB) using an 'A-weighting' filter ( dBA ), which mimics the sensitivity of the human ear across different sound frequencies. Peak sound pressure levels (impact noise from piling, cartridge tools, or explosives) are measured using a 'C-weighting' filter ( dBC ).

Because the decibel scale is logarithmic, every 3 dBA increase represents a doubling of acoustic sound energy . For example, a concrete saw operating at 88 dBA emits twice as much sound energy as a breaker operating at 85 dBA. Consequently, allowable exposure duration halves with every 3 dBA increase in noise level.

Action Levels and Exposure Limit Values for Noise

The 2005 Regulations define three statutory action thresholds based on daily personal noise exposure ( L E P , d L_{EP,d} L EP , d ​ ) over an 8-hour period, or peak sound pressure ( C p e a k C_{peak} C p e ak ​ ):

Statutory Noise Threshold Daily Exposure Level ( L E P , d L_{EP,d} L EP , d ​ ) Peak Sound Level ( C p e a k C_{peak} C p e ak ​ ) Mandatory Employer Actions

Lower Exposure Action Value (LEAV) 80 dBA 135 dBC Conduct noise risk assessment. Provide suitable hearing protection upon request . Provide noise hazard training and information.

Upper Exposure Action Value (UEAV) 85 dBA 137 dBC Mandatory Hearing Protection Zones (HPZs) with warning signs. Enforce wearing of hearing protection . Implement organizational/technical noise reduction program. Conduct mandatory audiometric health surveillance.

Maximum Exposure Limit Value (ELV) 87 dBA 140 dBC Absolute statutory limit. Taking into account the attenuation provided by hearing protection, exposure must NEVER exceed 87 dBA .

Key Rule: Hearing protection attenuation is excluded when assessing compliance against LEAV (80 dBA) and UEAV (85 dBA), but included when evaluating compliance against the 87 dBA Maximum Exposure Limit Value.

Hierarchy of Noise Control and Hearing Protection

Employers must eliminate or reduce noise at source using engineering and organizational controls before relying on hearing protection:

Elimination & Substitution: Select quiet plant (e.g. hydraulic crunching instead of pneumatic breaking).

Engineering Controls: Install acoustic enclosures around generators, fit silencers to pneumatic exhausts, erect acoustic blankets/screens around cutting areas.

Organizational Controls: Rotate workers out of high-noise areas, restrict access to noise zones, limit daily operating hours.

Hearing Protection: Provide ear defenders or earplugs with appropriate Single Number Rating (SNR) attenuation. Avoid over-protection (which prevents workers from hearing warning alarms or reverse hooters).

Regulatory Overview: Control of Vibration at Work Regulations 2005

Vibration exposure on construction sites occurs in two distinct forms:

Whole-Body Vibration (WBV): Transmitted through the seat or feet of earthmoving equipment, dumpers, and rollers, leading to severe lower back pain and spinal disorders.

Hand-Arm Vibration (HAV): Transmitted into the hands and arms during the operation of handheld power tools such as breakers, angle grinders, hammer drills, scabblers, and compactors.

The Control of Vibration at Work Regulations 2005 set legal limits on daily vibration exposure to protect workers from permanent vascular and neurological damage.

Understanding Hand-Arm Vibration Syndrome (HAVS)

Hand-Arm Vibration Syndrome (HAVS) is a painful, disabling, and irreversible condition affecting the blood vessels, nerves, joints, and muscles of the hands and arms. HAVS encompasses:

Vibration White Finger (VWF): Vascular damage causing episodic blanching (whitening) of the fingers triggered by cold temperatures, followed by intense pain and throbbing upon re-warming.

Neurological Damage: Permanent numbness, loss of tactile sensation, and tingling in fingers, impairing fine motor control (difficulty picking up small screws or buttons).

Musculoskeletal Damage: Carpal tunnel syndrome, loss of grip strength, and joint stiffness in wrists and elbows.

HAVS Exposure Action Values (EAV) and Exposure Limit Values (ELV)

Daily vibration exposure is expressed as an 8-hour equivalent continuous vibration value, A ( 8 ) A(8) A ( 8 ) , measured in meters per second squared (m/s²).

Statutory HAV Threshold Vibration Level A ( 8 ) A(8) A ( 8 ) Daily HSE Points Equivalent Mandatory Employer Actions

Daily Exposure Action Value (EAV) 2.5 m/s² 100 Points Implement technical and organizational controls to reduce exposure. Provide health surveillance (tier 1-4 HAVS assessments). Provide information and training.

Daily Exposure Limit Value (ELV) 5.0 m/s² 400 Points Absolute legal maximum limit. Daily worker exposure must NEVER exceed 5.0 m/s² (400 points) . Immediate work stoppage and control revision required if breached.

The HSE Points System and Practical Vibration Control

To simplify daily vibration tracking for site managers, the HSE established an exposure points system where 1 m/s² A ( 8 ) A(8) A ( 8 ) equals 16 points per hour : HSE Points per hour = 2 × ( a v w ) 2 \text{HSE Points per hour} = 2 \times (a_{vw})^2 HSE Points per hour = 2 × ( a v w ​ ) 2

where a v w a_{vw} a v w ​ is the tool vibration magnitude in m/s².

  • 100 Points = Exposure Action Value (2.5 m/s²)
  • 400 Points = Exposure Limit Value (5.0 m/s²)
  • Site Management Vibration Control Strategy

Tool Selection: Select low-vibration tools certified under the Supply of Machinery Regulations. Check manufacturer vibration data sheets.

Trigger Time Tracking: Monitor actual trigger time (the duration the tool motor is running), not total shift time.

Job Rotation: Limit daily trigger times per operative and rotate vibrating tasks among multiple trained workers.

Tool Maintenance: Maintain sharp drill bits, balanced grinding discs, and anti-vibration mounts. Worn tools increase vibration magnitude significantly.

Keep Hands Warm: Provide thermal gloves and warm rest areas to maintain peripheral blood circulation.

HAVS Daily Exposure Statutory Thresholds (HSE Points System)