Study guide

2.6 Behavioural Safety, Human Factors, and Accident Investigation Techniques

CITB Site Management Safety Training Scheme SMSTS

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Legal Framework, CDM 2015 & Health and Safety Management

1.1 How the SMSTS Course and Examination Actually Work 1.2 Health and Safety at Work etc. Act 1974 (HASAWA) & Statutory Duties 1.3 Management of Health and Safety at Work Regulations 1999 & HSG65 (Plan-Do-Check-Act) 1.4 CDM 2015 Overview & Five Duty Holders (Client, Principal Designer, Principal Contractor, Designer, Contractor) 1.5 CDM 2015 Project Documentation: PCI, Construction Phase Plan & Health and Safety File 1.6 Statutory Notifications (F10), Enforcement Notices (Improvement/Prohibition), and Fee for Intervention (FFI) 1.7 RIDDOR 2013: Reporting Over-7-Day Injuries, Specified Injuries, Occupational Diseases & Dangerous Occurrences

2 Chapter 2: Risk Management, RAMS & Site Safety Leadership

2.1 Principles of Risk Assessment & Five Steps to Risk Assessment 2.2 Hierarchy of Control Measures & Risk Matrices 2.3 Developing, Reviewing, and Implementing Risk Assessments & Method Statements (RAMS) 2.4 Permit to Work (PTW) Systems for High-Risk Activities 2.5 Worker Consultation, Toolbox Talks, and Safety Leadership Culture 2.6 Behavioural Safety, Human Factors, and Accident Investigation Techniques

3 Chapter 3: High-Risk Site Operations: Height, Excavations & Confined Spaces

3.1 Work at Height Regulations 2005 & Hierarchy of Control for Height Work 3.2 Scaffolding Standards (TG20, BS EN 12811) & Statutory 7-Day Inspection Regimes 3.3 Mobile Elevating Work Platforms (MEWPs), Ladders, Tower Scaffolds & Fragile Roof Safety 3.4 Excavation Safety: Preventing Ground Collapse, Shoring, Battering & Edge Protection 3.5 Underground Services Avoidance (HSG47): Cable Avoidance Tools (CAT) & Genny Operation 3.6 Confined Spaces Regulations 1997: Risk Assessment, Atmosphere Testing & Rescue Procedures 3.7 Temporary Works Management: BS 5975-1, Coordinator Roles & Permits to Load and Strike

4 Chapter 4: Occupational Health, Chemical Safety & Physical Hazards

4.1 Control of Substances Hazardous to Health (COSHH) Regulations & Exposure Limits 4.2 Respirable Crystalline Silica (RCS), Dust Control & Respiratory Protective Equipment (RPE) 4.3 Asbestos Management on Construction Sites: Control of Asbestos Regulations 2012 4.4 Noise at Work Regulations 2005 & Hand-Arm Vibration Syndrome (HAVS) Exposure Action Values 4.5 Manual Handling Operations Regulations 1992, Ergonomics & Musculoskeletal Health 4.6 Health Surveillance, Medical Fitness & Workplace Hygiene/Wellbeing 4.7 Lead in Buildings: Control of Lead at Work Regulations 2002 & Blood-Lead Surveillance 4.8 Drugs and Alcohol at Work: Legal Framework, Site Policy, Testing & Support

5 Chapter 5: Fire Safety, Electrical Protection & Plant Operations

5.1 Fire Prevention on Construction Sites (HSG168), Fire Triangle & Hot Work Permits 5.2 Fire Extinguishers, Means of Escape, LPG Storage & Emergency Evacuation Plans 5.3 Electricity at Work Regulations 1989 & Safe Isolation Procedures 5.4 110V Reduced Low Voltage Systems, RCDs & Overhead Power Lines Safety (GS6) 5.5 Provision and Use of Work Equipment Regulations 1998 (PUWER) & Equipment Inspections 5.6 Lifting Operations and Lifting Equipment Regulations 1998 (LOLER), Crane Safety & Rigging

6 Chapter 6: Site Setup, Logistics, Welfare & Environmental Protection

6.1 CDM 2015 Schedule 2 Welfare Facilities Standards & Site Setup Requirements 6.2 Site Traffic Management, Pedestrian-Vehicle Segregation & Delivery Logistics 6.3 Site Inductions, Security, Signage & Competence Verification (CSCS/CPCS) 6.4 First Aid at Work Regulations 1981: Needs Assessment, First Aiders & Equipment 6.5 Environmental Protection: Waste Management (Duty of Care), Pollution Prevention & Noise Control 6.6 Mobile Workforce, Lone Working & Driving for Work

2.6 Behavioural Safety, Human Factors, and Accident Investigation Techniques

Key Takeaways Explain This Topic AI

Human factors encompass Job Factors, Individual Factors, and Organizational Factors as structured under HSE guidance HSG48.

Human errors are categorized into unintentional errors (slips and lapses), mistakes (rule-based and knowledge-based), and violations (routine, situational, and exceptional).

Accident investigations conducted under HSE guidance HSG245 follow a 4-step process aimed at determining root causes to prevent recurrence rather than assigning personal blame.

RIDDOR 2013 imposes strict statutory reporting deadlines: deaths/specified injuries without delay (10 days written), over-7-day injuries within 15 days, and occupational diseases within 10 days.

The Heinrich/Bird Accident Triangle demonstrates that hundreds of near-misses and unsafe acts underlie every major injury, highlighting the value of near-miss reporting.

Last updated: August 2026

Behavioural Safety, Human Factors & Accident Investigation

Traditional health and safety management focused heavily on physical engineering controls. However, modern construction safety recognizes that human behavior and organizational systems drive the vast majority of workplace incidents. Understanding Human Factors (HSG48) and mastering structured Accident Investigation (HSG245) are core competencies for SMSTS-qualified site managers.

The HSE Human Factors Framework (HSG48)

According to the HSE guidance publication HSG48 ("Reducing Error and Influencing Behaviour") , human factors refer to environmental, organizational, and job factors, alongside human and individual characteristics, which influence behaviour at work. HUMAN FACTORS TRIAD (HSG48)

  • │
  • ┌───────────────────────┼───────────────────────┐
  • ▼ ▼ ▼
  • [JOB FACTORS] [INDIVIDUAL FACTORS] [ORGANIZATIONAL FACTORS]
  • Workload, Ergonomics, Competence, Fatigue, Leadership, Supervision,
  • Equipment Design Stress, Perception Commercial Pressures
  • 1. Job Factors

How tasks, plant, and physical environments are designed. Examples include clear machine layout, manageable workload, acceptable noise levels, and ergonomic tool design.

2. Individual Factors

Personal attributes workers bring to their job. Examples include physical capability, technical competence, training, attitude, fatigue, stress, and sensory limitations.

3. Organizational Factors

Corporate culture and management systems. Examples include safety leadership, supervision quality, resource allocation, commercial schedule pressure, and communication channels.

  • Taxonomy of Human Failure
  • Human failures are divided into Unintentional Errors and Intentional Violations : HUMAN FAILURES
  • │
  • ┌───────────────────────┴───────────────────────┐
  • ▼ ▼
  • UNINTENDED ERRORS VIOLATIONS
  • (Skill-based) (Intentional actions)
  • ├── Slips (Execution failure) ├── Routine (Workplace norm)
  • └── Lapses (Memory failure) ├── Situational (Site pressure)
  • └── Exceptional (Emergency shortcut)
  • MISTAKES
  • (Decisional failure)
  • ├── Rule-based (Wrong rule applied)
  • └── Knowledge-based (Unfamiliar problem)
  • Unintentional Errors

Slips: Execution errors in familiar, routine tasks (e.g., pulling the wrong lever on a hydraulic control panel despite knowing the correct lever).

Lapses: Memory failures (e.g., forgetting to check a winch brake lock during a routine crane setup).

Rule-Based Mistakes: Applying a remembered rule that is inappropriate for the specific situation.

Knowledge-Based Mistakes: Making an incorrect decision when confronting an unfamiliar problem without established rules.

Violations (Intentional Rule Breaking)

Routine Violations: Shortcuts that have become the standard way of working within a work crew because supervisors tolerate non-compliance.

Situational Violations: Rule-breaking caused by site constraints, such as lack of proper tools, severe weather, or intense schedule pressure.

Exceptional Violations: Rare rule-breaking occurring during emergency situations or catastrophic plant breakdowns.

Accident Investigation Methodology (HSG245)

Under HSE guidance HSG245 ("Investigating Accidents and Incidents") , the primary purpose of an accident investigation is not to assign individual blame or legal liability , but to uncover root causes and prevent future recurrences.

  • The 4-Step Investigation Process
  • Step 1: Gathering Information

Securing the physical scene immediately. Collect physical evidence, take photographs, record environmental conditions, review RAMS/training records, and interview witnesses individually as soon as possible after the event.

Step 2: Analyzing Information

Establish the complete sequence of events. Identify direct causes, underlying causes, and root causes.

Direct Causes: The immediate physical agent of harm (e.g., a worker struck by falling brick pallet).

Underlying Causes: Failed management controls (e.g., worn lifting net straps, lack of pre-use inspection).

Root Causes: Systemic organizational failures (e.g., inadequate plant maintenance budget, lack of competent LOLER inspection scheduling).

The "5 Whys" Root Cause Technique

Asking "Why?" repeatedly to move past surface symptoms down to organizational root causes:

Incident: Operative fell from a step ladder.

  • Why 1? The ladder slipped on grease. (Direct Cause)
  • Why 2? Hydraulic oil leaked from a mini-excavator onto the floor. (Underlying Cause)
  • Why 3? The mini-excavator hose was damaged and not repaired. (Underlying Cause)

Why 4? Daily pre-use plant checks were not being enforced by supervision.

  • Why 5? Site management failed to implement a structured plant inspection audit system. (Root Cause)
  • Step 3: Identifying Risk Control Measures

Determine remedial actions based strictly on the Hierarchy of Controls to prevent recurrence.

Step 4: Action Plan & Implementation

Assign responsible managers, set clear completion target dates, track actions, and share lessons learned across the organization.

Statutory RIDDOR 2013 Reporting Obligations

Under the Reporting of Injuries, Diseases and Dangerous Occurrences Regulations 2013 (RIDDOR) , responsible persons (site managers) must report specific site incidents to the HSE Incident Contact Centre (ICC):

RIDDOR Incident Category Key Examples Statutory Reporting Deadline

Deaths & Specified Injuries Fractures (excluding fingers/toes), amputations, loss of sight, severe burns, loss of consciousness from asphyxia/head injury. Report without delay (phone/online); written report within 10 days .

Over-7-Day Incapacitation Worker is off work or unable to perform normal duties for over 7 consecutive days (excluding day of accident). Written report submitted online within 15 days .

Occupational Diseases Carpal tunnel, Hand-Arm Vibration (HAVS), occupational asthma, asbestosis, silicosis. Written report within 10 days of medical diagnosis.

Dangerous Occurrences Scaffold collapse (> 5m height), crane overturn, electric short circuit causing fire/explosion. Report without delay ; written report within 10 days .

The Heinrich / Bird Accident Triangle Model

The Accident Triangle demonstrates the statistical relationship between minor site events and catastrophic injuries: 1 Major / Fatal Injury : 10 Minor Injuries : 30 Property Damage Events : 600 Near Misses / Unsafe Acts \text{1 Major / Fatal Injury} : \text{10 Minor Injuries} : \text{30 Property Damage Events} : \text{600 Near Misses / Unsafe Acts} 1 Major / Fatal Injury : 10 Minor Injuries : 30 Property Damage Events : 600 Near Misses / Unsafe Acts

Site managers who actively encourage near-miss reporting capture early warning indicators. By investigating near-misses at the base of the triangle, managers eliminate hazards before they escalate into major injuries or fatalities.

The Heinrich / Bird Safety Triangle Ratio