Study guide
6.6 Mobile Workforce, Lone Working & Driving for Work
CITB Site Management Safety Training Scheme SMSTS
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Legal Framework, CDM 2015 & Health and Safety Management
1.1 How the SMSTS Course and Examination Actually Work 1.2 Health and Safety at Work etc. Act 1974 (HASAWA) & Statutory Duties 1.3 Management of Health and Safety at Work Regulations 1999 & HSG65 (Plan-Do-Check-Act) 1.4 CDM 2015 Overview & Five Duty Holders (Client, Principal Designer, Principal Contractor, Designer, Contractor) 1.5 CDM 2015 Project Documentation: PCI, Construction Phase Plan & Health and Safety File 1.6 Statutory Notifications (F10), Enforcement Notices (Improvement/Prohibition), and Fee for Intervention (FFI) 1.7 RIDDOR 2013: Reporting Over-7-Day Injuries, Specified Injuries, Occupational Diseases & Dangerous Occurrences
2 Chapter 2: Risk Management, RAMS & Site Safety Leadership
2.1 Principles of Risk Assessment & Five Steps to Risk Assessment 2.2 Hierarchy of Control Measures & Risk Matrices 2.3 Developing, Reviewing, and Implementing Risk Assessments & Method Statements (RAMS) 2.4 Permit to Work (PTW) Systems for High-Risk Activities 2.5 Worker Consultation, Toolbox Talks, and Safety Leadership Culture 2.6 Behavioural Safety, Human Factors, and Accident Investigation Techniques
3 Chapter 3: High-Risk Site Operations: Height, Excavations & Confined Spaces
3.1 Work at Height Regulations 2005 & Hierarchy of Control for Height Work 3.2 Scaffolding Standards (TG20, BS EN 12811) & Statutory 7-Day Inspection Regimes 3.3 Mobile Elevating Work Platforms (MEWPs), Ladders, Tower Scaffolds & Fragile Roof Safety 3.4 Excavation Safety: Preventing Ground Collapse, Shoring, Battering & Edge Protection 3.5 Underground Services Avoidance (HSG47): Cable Avoidance Tools (CAT) & Genny Operation 3.6 Confined Spaces Regulations 1997: Risk Assessment, Atmosphere Testing & Rescue Procedures 3.7 Temporary Works Management: BS 5975-1, Coordinator Roles & Permits to Load and Strike
4 Chapter 4: Occupational Health, Chemical Safety & Physical Hazards
4.1 Control of Substances Hazardous to Health (COSHH) Regulations & Exposure Limits 4.2 Respirable Crystalline Silica (RCS), Dust Control & Respiratory Protective Equipment (RPE) 4.3 Asbestos Management on Construction Sites: Control of Asbestos Regulations 2012 4.4 Noise at Work Regulations 2005 & Hand-Arm Vibration Syndrome (HAVS) Exposure Action Values 4.5 Manual Handling Operations Regulations 1992, Ergonomics & Musculoskeletal Health 4.6 Health Surveillance, Medical Fitness & Workplace Hygiene/Wellbeing 4.7 Lead in Buildings: Control of Lead at Work Regulations 2002 & Blood-Lead Surveillance 4.8 Drugs and Alcohol at Work: Legal Framework, Site Policy, Testing & Support
5 Chapter 5: Fire Safety, Electrical Protection & Plant Operations
5.1 Fire Prevention on Construction Sites (HSG168), Fire Triangle & Hot Work Permits 5.2 Fire Extinguishers, Means of Escape, LPG Storage & Emergency Evacuation Plans 5.3 Electricity at Work Regulations 1989 & Safe Isolation Procedures 5.4 110V Reduced Low Voltage Systems, RCDs & Overhead Power Lines Safety (GS6) 5.5 Provision and Use of Work Equipment Regulations 1998 (PUWER) & Equipment Inspections 5.6 Lifting Operations and Lifting Equipment Regulations 1998 (LOLER), Crane Safety & Rigging
6 Chapter 6: Site Setup, Logistics, Welfare & Environmental Protection
6.1 CDM 2015 Schedule 2 Welfare Facilities Standards & Site Setup Requirements 6.2 Site Traffic Management, Pedestrian-Vehicle Segregation & Delivery Logistics 6.3 Site Inductions, Security, Signage & Competence Verification (CSCS/CPCS) 6.4 First Aid at Work Regulations 1981: Needs Assessment, First Aiders & Equipment 6.5 Environmental Protection: Waste Management (Duty of Care), Pollution Prevention & Noise Control 6.6 Mobile Workforce, Lone Working & Driving for Work
6.6 Mobile Workforce, Lone Working & Driving for Work
Key Takeaways Explain This Topic AI
Health and safety law applies to work activities on the road in exactly the same way as it applies on a fixed site, alongside road traffic law enforced by the police and DVSA.
HSE guidance structures work-related road risk around three elements: the safe driver, the safe vehicle and the safe journey.
Grey fleet vehicles — those owned and driven by a worker for business purposes, including under cash allowance schemes — are covered by the same duties as company vehicles.
Commuting is not generally classed as driving for work, except where a journey starts at home and travels to a location that is not the worker's normal place of work.
Certain high-risk work must never be done alone, including confined space entry, work near exposed live electrical conductors, diving, carrying explosives and fumigation.
Last updated: August 2026
The Workforce Beyond the Hoarding
Site safety management naturally concentrates on what happens inside the perimeter. But a construction organisation's highest-consequence risks frequently sit outside it : the groundworker driving a tipper between three sites in a day, the maintenance fitter attending an emergency callout alone at 2 am, the surveyor visiting a derelict building unaccompanied, the security guard patrolling a compound overnight. CITB lists mobile workforce and driver safety as its own learning outcome in Module 3 of the SMSTS syllabus, requiring managers to describe the legal framework and guidance supporting the management of health and safety for mobile, lone and out-of-hours workers .
The scale explains the emphasis. Driving for work is one of the most dangerous activities most workers will ever undertake, and it kills more people annually across the UK economy than the entire construction site fatality figure.
Driving for Work: The Legal Position
HSE's position is unambiguous: health and safety law applies to work activities on the road in the same way as it does to all work activities. The duties under HASAWA 1974 and the Management of Health and Safety at Work Regulations 1999 do not stop at the site gate, and the requirement for a suitable and sufficient risk assessment covers the journey as much as the excavation.
Running alongside it is road traffic law — principally the Road Traffic Act 1988 and the Road Vehicles (Construction and Use) Regulations — enforced by the police and the Driver and Vehicle Standards Agency (DVSA) rather than by HSE. Where a work-related death results from serious management failure, the Corporate Manslaughter and Corporate Homicide Act 2007 and gross negligence manslaughter are both live possibilities.
Scope — who and what is covered
Situation Covered by health and safety law?
Employee driving a company van between sites Yes
Worker driving their own car on business — grey fleet Yes — including vehicles used under cash allowance schemes
- Self-employed operative and gig-economy or dependent contractors driving for the work Yes
- Riding a motorcycle, powered two-wheeler or bicycle for work Yes
- Ordinary commuting between home and the normal place of work No — not generally classed as driving for work
- Travelling from home directly to a location that is not the normal place of work Yes
The grey fleet line is the one most often missed on construction projects, where subcontract trades routinely use their own vehicles. The employer cannot inspect a worker's private car the way it services its own fleet, but it can and must set requirements: valid licence, valid MOT, business-use insurance, and a maintained roadworthy condition.
Safe Driver, Safe Vehicle, Safe Journey
HSE structures work-related road risk into three elements. Assessing all three is what turns a driving policy into a control.
1. The safe driver
Licence checks at engagement and periodically thereafter, including the correct categories for the vehicle and any trailer — towing entitlements are a common gap on construction plant trailers and tipper-and-plant combinations.
Competence and training matched to the vehicle: a van loaded with tools handles nothing like a car, and load shift is a real risk.
Fitness to drive : eyesight, medical conditions, and — connecting directly to Section 4.8 — prescribed and over-the-counter medication carrying drowsiness warnings.
Fatigue management : journey scheduling that does not require driving after a full shift on site, and recognition that a long drive home after a 12-hour day is itself a foreseeable risk.
Distraction : an enforced rule that calls are not taken while driving. Handheld phone use is a criminal offence, and a policy of calling supervisors "when they are on the road" undermines it.
2. The safe vehicle
Servicing and MOT to schedule, with records.
Daily walkaround checks — tyres, lights, mirrors, screenwash, fluid levels, load restraint — recorded rather than assumed.
Load security , which on construction is the sharpest issue: unsecured tools, gas bottles, materials and equipment in a van become projectiles in a collision, and anything transported on the public highway must be secured to protect the driver, other road users and those unloading.
Correct specification: seat belts, appropriate towing capacity and noseweight, beacons and markings where required, and a defect reporting route the driver will actually use.
3. The safe journey
Route planning that avoids unsuitable roads for the vehicle and load, and accounts for site access constraints.
Realistic schedules with enough time allowed. Programming three site visits into a day that only allows two is how speeding becomes an organisational decision.
Rest breaks built into the plan, and drivers' hours rules where the vehicle and operation bring them into scope.
Weather and darkness planning, with authority for the driver to postpone a journey without penalty. That authority must be explicit; otherwise commercial pressure supplies the answer.
Lone Working
A lone worker is someone who works by themselves without close or direct supervision — including those working away from a fixed base such as delivery drivers, mobile fitters and surveyors, and those working separately from others on a large site or out of hours. Lone working is not illegal , and there is no separate lone working regulation. The duty comes from the Management of Health and Safety at Work Regulations 1999: you must manage the risk to lone workers , which means assessing whether the work can be done safely by one person and putting arrangements in place if it can.
HSE identifies risks that particularly affect lone workers:
Violence in the workplace — a real risk for security staff, and for anyone attending an unoccupied site or a domestic property alone
Stress, mental health and wellbeing , aggravated by isolation
A person's medical suitability to work alone — an epileptic seizure or cardiac event that would be survivable with colleagues present may not be alone
The workplace itself , particularly rural, isolated or poor-signal locations
The employer must train, supervise and monitor lone workers, keep in touch with them, and respond to any incident . Where a lone worker will be at someone else's workplace, you must ask that employer about the risks and control measures there.
Work that must never be done alone
HSE identifies categories of high-risk work requiring at least one other person present:
Work in a confined space , where a supervisor may need to be present along with someone in a designated rescue role (see Section 3.6)
- Work near exposed live electricity conductors (see Section 5.3)
- Diving operations
- Work in vehicles carrying explosives
- Fumigation work
This list is worth memorising, because it converts a judgement call into a rule. A request to send one operative into a chamber to take a reading, on the basis that "he will only be a minute", is refused on principle, not on assessment.
Practical arrangements
Control What it looks like in practice
Check-in / check-out system Agreed contact times with a named responsible person, and an explicit escalation procedure if a check-in is missed
Lone worker devices and apps Man-down and no-motion alarms, panic buttons, GPS location, with a monitored response centre rather than a colleague's mobile
Buddy system Pairing for the highest-risk elements even where the wider task can be done alone
Dynamic risk assessment Trained authority for the lone worker to withdraw if the situation on arrival differs from the plan
Medical screening Assessment of fitness to work alone where the task or location makes rescue difficult
Emergency arrangements First aid provision, access for emergency services out of hours, key holder arrangements, and a means of raising the alarm that works in low signal
Out-of-Hours Work
Night shifts, weekend working and callouts remove most of the informal safety net a busy site provides: no first aider on the gate, no second pair of eyes, no supervisor to consult, and emergency services facing a locked compound. Out-of-hours arrangements must therefore be planned explicitly — continuous first aid cover for every shift worked (Section 6.4), lighting, a documented means of emergency access, keyholder contact details lodged with the alarm receiving centre, and a clear rule about what work is not permitted out of hours. In most cases the answer is that hot work, confined space entry, live electrical work and lifting operations are daytime activities with full supervision, and that the out-of-hours scope is limited to activities that can be safely abandoned mid-task.