Study guide
14.2 Environmental Protection, NPDES Stormwater & Asbestos / Lead
Florida Construction Business and Finance Exam Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Business Organization & Corporate Governance
1.1 Business Organizational Structures & Personal Liability 1.2 Fiduciary Duties, Officers & Qualifying Agent Responsibilities 1.3 Licensing Scope, Name Registration & Business Setup
2 Chapter 2: Business Planning, Capitalization & Commercial Insurance
2.1 Contractor Business Planning, Capitalization & Working Capital 2.2 Professional Advisory Relationships & Fixed Asset Acquisition 2.3 Commercial Insurance Coverage for Contractors
3 Chapter 3: Estimating, Overhead Allocation & Bid Preparation
3.1 Estimating Principles, Direct Costs & Quantity Takeoffs 3.2 Business Overhead Determination & Allocation Methods 3.3 Bid Preparation, Markup vs. Margin Calculations & Submission
4 Chapter 4: Construction Contracts & AIA Standard Agreements
4.1 Construction Contract Types & Essential Clauses 4.2 AIA Document A201 General Conditions of the Contract 4.3 AIA Document A401 Subcontract Agreements & Flow-Down Provisions
5 Chapter 5: Project Billing, Invoicing & Jobsite Safety Management
5.1 Progress Billing, Schedule of Values & AIA G702/G703 5.2 Change Orders, Construction Change Directives & Claims Management 5.3 Developing Written Safety Programs & Hazard Communication
6 Chapter 6: Project Scheduling, Critical Path Method & Trade Coordination
6.1 Critical Path Method (CPM) Scheduling Fundamentals 6.2 Total Float, Free Float & Critical Path Identification 6.3 Trade Sequencing, Submittal Logs & Requests for Information
7 Chapter 7: Logistics, Inventory Management & Jobsite Safety Recordkeeping
7.1 Material Procurement, Inventory Management & Fleet Operations 7.2 OSHA Recordkeeping, Injury Logs & Reporting Mandates
8 Chapter 8: Construction Accounting Fundamentals & Financial Statements
8.1 Construction Accounting Methods & Revenue Recognition 8.2 The Construction Balance Sheet & Working Capital Management 8.3 The Income Statement, Direct Costs & Gross Profit Analysis
9 Chapter 9: Financial Ratio Analysis, Job Costing & Work-in-Progress (WIP)
9.1 Construction Financial Ratio Analysis & Benchmarks 9.2 Job Cost Accounting, CSI Cost Codes & Variance Reporting 9.3 Work-in-Progress (WIP) Schedule & Over/Under-Billing
10 Chapter 10: Cash Management, Receivables, Payroll Burden & Tax Compliance
10.1 Cash Flow Projections, Receivables Management & Collections 10.2 Accounts Payable, Vendor Terms & 2/10 Net 30 Mathematics 10.3 Comprehensive Payroll Burden & Direct Labor Costing 10.4 Federal and Florida Tax Compliance & Statutory Filings
11 Chapter 11: Human Resources, Labor Regulations & Prevailing Wage
11.1 Employment Discrimination, Labor Relations & Hiring Regulations 11.2 Worker Classification (W-2 vs. 1099), I-9 & Florida E-Verify 11.3 Fair Labor Standards Act (FLSA) & Davis-Bacon Prevailing Wage
12 Chapter 12: Florida Construction Licensing Law & Business Governance
12.1 DBPR, CILB & Florida Contractor Licensing Structure 12.2 Qualifying Agents, Business Entities & Fiduciary Duties 12.3 CILB Disciplinary Grounds, Fines & Unlicensed Contracting
13 Chapter 13: Florida Construction Lien Law & Public Payment Bonds
13.1 Florida Lien Law (F.S. Chapter 713) Foundations & Notice to Owner (NTO) 13.2 Claim of Lien Perfection, 90-Day Deadlines & Foreclosure 13.3 Florida Public Payment Bonds & Florida Little Miller Act
14 Chapter 14: Workers' Compensation, Environmental Compliance & Safety Regulations
14.1 Florida Workers' Compensation Law (F.S. Chapter 440) 14.2 Environmental Protection, NPDES Stormwater & Asbestos / Lead
14.2 Environmental Protection, NPDES Stormwater & Asbestos / Lead
Key Takeaways Explain This Topic AI
Florida's NPDES Generic Permit for Stormwater Discharge from Large and Small Construction Activities (CGP) regulates construction activities disturbing 1 or more acres of land, or smaller sites part of a larger common plan of development.
The responsible operator must develop a site-specific SWPPP and submit a complete NOI and permit fee to FDEP at least 2 calendar days before commencing soil-disturbing activities.
Qualified inspectors must conduct SWPPP inspections at least once every 7 calendar days and within 24 hours of any rainfall event measuring 0.50 inches or greater.
Under the Asbestos NESHAP and FDEP rules, contractors must submit written notification at least 10 working days prior to demolition or renovation involving regulated asbestos-containing material (RACM) meeting statutory threshold quantities.
The EPA Renovation, Repair, and Painting (RRP) Rule mandates lead-safe work practices, firm certification, and certified renovators for pre-1978 target housing and child-occupied facilities, with 3-year record retention requirements.
Last updated: October 2026
14.2 Environmental Protection, NPDES Stormwater & Asbestos / Lead
Exam Focus: Environmental compliance on Florida construction projects is governed by overlapping federal EPA standards and Florida Department of Environmental Protection (FDEP) rules. Key examination areas include National Pollutant Discharge Elimination System (NPDES) Construction Generic Permit rules, Stormwater Pollution Prevention Plan (SWPPP) implementation, Asbestos NESHAP notification thresholds, and EPA Lead Renovation, Repair, and Painting (RRP) mandates.
Florida NPDES Stormwater Construction Generic Permit (CGP)
Under Section 402 of the Federal Clean Water Act and F.A.C. Rule 62-621.300(4)(a), qualifying construction activity that discharges stormwater to surface waters of the state, directly or through an MS4, requires NPDES authorization.
Regulatory Disturbance Thresholds
Coverage under the Florida Generic Permit for Stormwater Discharge from Large and Small Construction Activities (CGP) is mandatory for:
Any construction project that disturbs one (1) or more acres of total land area.
Projects disturbing less than one acre of land if the activity is part of a "larger common plan of development or sale" that ultimately disturbs one or more cumulative acres (such as an individual half-acre commercial outparcel inside a master planned retail center).
Permitting Process and Notice of Intent (NOI)
To obtain CGP authorization, the operator —the entity with authority to control the construction activities needed for permit compliance—completes the following steps. The operator may be an owner, contractor, public organization, or other legal entity; it is not automatically the general contractor:
Prepare SWPPP: Complete a site-specific Stormwater Pollution Prevention Plan before filing for permit coverage.
Submit Notice of Intent (NOI): Submit FDEP Form 62-621.300(4)(b) electronically through the FDEP Business Portal along with the required statutory application fee ($250 for projects disturbing between 1 and 5 acres; $400 for projects disturbing 5 or more acres).
Filing Timeline: The NOI and fee must be submitted at least 48 hours prior to commencing any soil-disturbing construction activity (clearing, grubbing, grading, or excavating).
Coverage Duration: CGP permit coverage remains effective for a term of up to five (5) years .
Stormwater Pollution Prevention Plan (SWPPP) & Best Management Practices
The Stormwater Pollution Prevention Plan (SWPPP) is a living technical document that details site hydrology, potential pollutant sources, and engineering controls designed to prevent soil erosion and retain sediment on site. The SWPPP must be retained directly on the active construction jobsite at all times from initial ground disturbance until final site stabilization.
Best Management Practices (BMPs) Categories
Erosion and sediment controls implemented under an SWPPP are divided into structural and operational Best Management Practices:
BMP Classification Control Mechanism Operational Function & Placement
Structural Controls Silt Fences Geotextile fabric trenched into the soil along downslope site perimeters to filter sediment out of sheet flow.
Structural Controls Sediment Basins / Traps Engineered impoundment areas designed to slow runoff velocity, allowing suspended soil particles to settle before discharge.
Structural Controls Turbidity Barriers Floating geotextile curtains deployed directly in adjacent wetlands, canals, or open water bodies to confine suspended sediment.
Structural Controls Storm Drain Inlet Protection Fabric drops, gravel bags, or block-and-gravel filters placed around curb inlets and catch basins to catch sediment.
Operational Controls Stabilized Construction Entrance Aggregate, tire wash, or another SWPPP-selected control sized and maintained for site traffic and soil conditions; the Florida CGP requires control of off-site tracking but does not prescribe a universal 50-foot-by-6-inch entrance.
Operational Controls Phased Clearing & Mulching Minimizing exposed soil by stripping ground in stages; applying temporary seed, straw mulch, or soil tackifiers within 7 days of grading cessation.
Operational Controls Concrete Washout Enclosures Impervious, lined pits or prefabricated containers for cleaning mixer chutes, preventing caustic cement wash from entering groundwater.
SWPPP Inspection Protocols and Notice of Termination (NOT)
Routine surveillance and maintenance of erosion controls are strict legal requirements under the Florida CGP.
Mandatory Inspection Schedule
Inspections must be performed by a qualified inspector . The CGP accepts a person who completed the DEP inspector program, completed equivalent formal training, or is qualified through other training or practical experience in stormwater pollution prevention and erosion/sediment control; professional engineering licensure is not the only alternative:
Weekly Frequency: Conducted at least once every seven (7) calendar days .
Rainfall Event Trigger: Conducted within 24 hours of the end of any rainfall event producing 0.50 inches or greater of precipitation.
Rain Gauge Protocol: The contractor must maintain a calibrated rain gauge on site, or record daily rainfall data from a verified local National Weather Service reporting station.
Inspection Logs and Corrective Action Timelines
Each inspection requires a written report documenting the inspection date, rainfall measurement, condition of outfalls and receiving waters, and operational status of all BMPs. If an inspector identifies failing, compromised, or damaged controls (such as a fallen silt fence or filled sediment trap):
Corrective actions and any needed SWPPP/control revisions must be completed in a timely manner and no later than seven (7) calendar days after the inspection or identification of the issue.
The site log contains the NOI, coverage acknowledgment, SWPPP, inspection reports, records, and DEP notifications. Records must be retained for three years from final stabilization and NOT submission.
Notice of Termination (NOT) and Final Stabilization
Permit obligations do not cease when building construction concludes. The contractor remains legally liable for stormwater discharges until formal permit termination:
Final Stabilization Requirement: All soil-disturbing activities must be complete, and unpaved areas not covered by permanent structures must have uniform perennial vegetative cover with at least 70% density or equivalent permanent stabilization. The current Florida CGP states a 70% density standard, not “70% of native background.”
Filing NOT: The operator must submit a Notice of Termination (NOT) using the current FDEP Notice of Termination form identified under Rule 62-621.300(6) within 14 calendar days after achieving verified 70% final stabilization.
Asbestos NESHAP Regulations & Florida DEP Rules (40 CFR Part 61 & F.A.C. 62-257)
The federal Clean Air Act regulates asbestos emissions under the National Emission Standards for Hazardous Air Pollutants (NESHAP), codified in 40 CFR Part 61, Subpart M, and enforced across Florida through FDEP and Chapter 62-257 of the Florida Administrative Code.
Mandatory Pre-Work Inspection
Prior to initiating any demolition or renovation work on a commercial structure, institutional building, or multi-family residential property with more than four dwelling units, the facility owner or contractor must have a thorough inspection conducted by an accredited Florida licensed asbestos consultant to identify all Regulated Asbestos-Containing Material (RACM) , regardless of the construction date of the building.
Threshold Triggers and Mandatory Written Notification
Written notification must be submitted to FDEP or the local county environmental protection agency using FDEP Form 62-257.900(1) at least ten (10) working days (excluding weekends and legal holidays) prior to initiating:
Any demolition project , even when no asbestos is present in the facility.
Any renovation project disturbing RACM that equals or exceeds the statutory threshold quantities :
- 160 square feet on facility components (such as wallboard, flooring, or ceiling materials);
- 260 linear feet on pipes; or
35 cubic feet off facility components where the area or length could not previously be measured.
RACM includes friable asbestos material (material containing greater than 1% asbestos that can be crumbled by hand pressure) and non-friable Category I or II materials that have become pulverized or subjected to sanding, grinding, or abrasive cutting. Asbestos abatement work in Florida must be performed by a licensed Asbestos Abatement Contractor licensed under Florida Statutes Chapter 469.
EPA Renovation, Repair, and Painting (RRP) Rule (40 CFR Part 745)
The EPA Lead Renovation, Repair, and Painting (RRP) Rule protects occupants and workers from hazardous lead dust generated during construction activities.
Statutory Applicability
The RRP Rule applies to any paid contractor, painter, carpenter, or window installer performing work that disturbs painted surfaces in:
Target Housing: Any residential dwelling constructed prior to 1978 (except zero-bedroom housing or housing designated for elderly persons where no child under age 6 resides).
Child-Occupied Facilities: Any public or commercial building built before 1978 where children under age 6 regularly visit (such as daycares, preschools, and elementary classrooms).
Firm Certification and Certified Renovator Training
Firm Certification: Contracting businesses performing covered renovations must apply to the EPA and obtain an official Lead-Safe Certified Firm credential.
Certified Renovator: Each jobsite must have at least one designated Certified Renovator who has successfully completed an EPA-accredited 8-hour training course. The Certified Renovator trains workers, oversees work-area containment, and performs cleaning verification.
Prohibited Practices and Recordkeeping
The RRP Rule strictly bans dangerous work techniques that vaporize or disperse lead dust:
Prohibited Work Methods: Open-flame burning or torching; heat guns operating at or above 1,100 degrees Fahrenheit; and operating power tools (sanders, grinders, planers) without an attached HEPA-exhaust vacuum shroud.
Mandatory Lead-Safe Work Practices: Heavy-duty plastic sheeting must extend at least 6 feet beyond work perimeters for interior renovations and at least 10 feet for exterior renovations.
Record Retention: Contractors must retain all signed pre-renovation education acknowledgment receipts (distributing the EPA "Renovate Right" pamphlet), certified renovator certificates, and post-work cleaning verification records for a minimum of three (3) years .
Florida Environmental Compliance Comparison Matrix
Compliance Program Regulatory Agency Statutory Applicability Threshold Advance Notice / Document Mandate Key Inspection / Verification Requirement
NPDES Stormwater CGP Florida DEP (CWA Sec. 402) Disturbance of 1 or more acres (or smaller site in larger plan) Electronic Notice of Intent (NOI) filed at least 48 hours prior to groundbreaking Inspect every 7 calendar days and within 24 hours of a 0.50-inch rain event; 70% vegetative cover for termination
Asbestos NESHAP FDEP / EPA (40 CFR Part 61) Demolitions of all facilities; Renovations disturbing 160 sq ft, 260 linear ft, or 35 cu ft of RACM Written notice submitted at least 10 working days prior to work start Prior inspection by licensed asbestos consultant; zero visible airborne emissions; leak-tight waste disposal
Lead RRP Rule EPA (40 CFR Part 745) Renovations disturbing painted surfaces in pre-1978 target housing and child-occupied facilities Provide "Renovate Right" pamphlet to owners/tenants prior to work Certified Renovator oversight; HEPA shroud dust containment; retain compliance records for 3 years