Study guide
2.3 Purchases, Blocks & Tackle
USCG Master 100-Ton Captain License Master Less Than 100 GRT
Track your progress as you read
Finished sections get a check mark.
1 Introduction: Master 100 Credential
0.1 About the Master Less Than 100 GRT Credential 0.2 Eligibility, Sea Service & Tonnage Calculations 0.3 MMC Application: TWIC, Medical, Drug Test, Fees & ASAP 0.4 ONC06 Exam Format, Modules, Scoring & REC Logistics
2 Rules of the Road: Foundation
1.1 COLREGS vs Inland Rules 1.2 General Definitions (Rules 1–3) 1.3 Lookout & Safe Speed (Rules 5–6) 1.4 Risk of Collision (Rule 7)
3 Rules of the Road: Steering & Sailing
1.5 Action to Avoid Collision (Rule 8) 1.6 Narrow Channels & TSS (Rules 9–10) 1.7 Overtaking (Rules 11–13) 1.8 Head-On & Crossing (Rules 14–15)
4 Rules of the Road: Responsibilities & Visibility
1.9 Give-Way & Stand-On (Rules 16–17) 1.10 Responsibilities Between Vessels (Rule 18) 1.11 Conduct in Restricted Visibility (Rule 19) 1.12 Lights & Shapes — General (Rules 20–22)
5 Rules of the Road: Lights & Shapes Detail
1.13 Lights for Power-Driven Vessels (Rule 23) 1.14 Lights & Shapes for Towing/Pushing (Rule 24) 1.15 Lights for Sailing, Rowing & Fishing (Rules 25–26) 1.16 NUC, RAM, CBD, Pilot, Anchored & Aground (Rules 27–30)
6 Rules of the Road: Sound, Light & Distress Signals
1.17 Sound Signals — Maneuvering & Warning (Rules 32–34) 1.18 Sound Signals in Restricted Visibility (Rule 35) 1.19 Distress Signals (Rule 37 / Annex IV)
7 Deck General: Seamanship
2.1 Vessel Nomenclature & Construction Terms 2.2 Marlinespike Seamanship: Lines, Knots & SWL 2.3 Purchases, Blocks & Tackle 2.4 Ground Tackle, Anchoring & Mooring
8 Deck General: Maneuvering
2.5 Boat Handling, Prop Walk & Pivot Point 2.6 Docking, Undocking & Line Handling 2.7 Bank Effects, Shallow Water & Wake 2.8 Heavy Weather Deck Handling
9 Deck General: Ops, Engines & Documents
2.9 Marine Engines, Fuel & Small Power Plants 2.10 Stability, Trim & Tonnage Basics for Masters 2.11 Certificates, Documents & COI 2.12 Passenger Operations, Watchkeeping & Shipboard Management
10 Deck Safety: Fire & Lifesaving
3.1 Fire Classes, Chemistry & Prevention 3.2 Firefighting Equipment, Systems & Drills 3.3 Required Safety Equipment & PFDs 3.4 Lifesaving Appliances for Small Passenger Vessels (T-Boats)
11 Deck Safety: Emergencies
3.5 Man Overboard & Recovery 3.6 Flooding, Damage Control & Abandon Ship 3.7 First Aid, Survival & Cold-Water Immersion 3.8 Communications, Distress Signals & SAR
12 Deck Safety: Pollution & Crew Safety
3.9 Pollution Prevention & Oil Discharge Rules 3.10 Passenger/Crew Safety in Emergencies 3.11 Hot Work, Temporary Repairs & Shipboard Safety
13 Navigation General: Charts & Aids to Navigation
4.1 Nautical Charts, Scale, Lat/Long & Chart No. 1 4.2 U.S. Aids to Navigation: Lateral Marks (IALA-B) 4.3 Non-Lateral Aids, Light Characteristics & Numbering 4.4 Navigation Publications & Notices to Mariners
14 Navigation General: Compass & Piloting
4.5 Magnetic Compass: Variation & Deviation 4.6 Compass Error & TVMDC Conversions 4.7 Bearings, LOPs & Fixes 4.8 Dead Reckoning: Speed-Time-Distance
15 Navigation General: Tides, Currents & Weather
4.9 Tides: Tables, Datums & Height of Tide 4.10 Currents: Set, Drift & Current Tables 4.11 Marine Weather & Meteorology 4.12 Storm Warnings & Heavy-Weather Navigation Decisions
16 Navigation General: Electronics & Radio
4.13 Electronic Navigation: GPS, Chartplotters, Depth & AIS 4.14 Radar Basics & Marine Radio (VHF)
17 Chart Plotting (90% Module)
5.1 Plotting Tools & Chart Setup 5.2 Plotting Courses, Bearings & Measuring Distance 5.3 Set, Drift & Course-to-Steer 5.4 Fixes, Running Fixes & Timed Plot Problems
2.3 Purchases, Blocks & Tackle
Key Takeaways Explain This Topic AI
A purchase (block and tackle) multiplies force: ideal mechanical advantage roughly equals the number of supporting parts of line at the moving block (gun tackle ≈2, luff ≈3, double purchase ≈4, etc.).
Friction and sheave condition reduce real advantage; never assume catalog ideal MA on worn gear.
Sheave diameter should be large enough for the line—common manila teaching rule of thumb is about twice the line's circumference for minimum sheave diameter.
Fairleads keep the line running true; bad leads chafe rope and overload blocks.
Bosun's chair: ride with the shackle pin through the bridle eye (secure the pin); treat personnel lifting as a safety-critical evolution, not a cargo shortcut.
Last updated: July 2026
Why Purchases Appear on Master 100
Even on vessels under 100 GRT , masters supervise boat falls , hatch or canopy gear, improvised lifts, and maintenance aloft. Q160 Deck General still asks classic block-and-tackle questions: name the purchase, count parts of line, size the sheave, and keep people alive in a bosun's chair . You do not need a deep-sea bosun's resume—you need the definitions and safety rules the exam repeats.
Blocks, Sheaves, Tackles, and Fairleads
- Term Meaning
- Block Frame (shell) holding one or more sheaves (wheels) the line runs over
- Sheave The grooved wheel inside the block
- Single / double / triple block Number of sheaves in that block
- Tackle / purchase Combination of blocks and line arranged for mechanical advantage (MA)
- Standing block Block fixed to a strong point
- Moving (traveling) block Block that moves with the load
- Hauling part The part of the line you pull
- Standing part Fixed end of the fall made fast
- Fairlead Fitting that guides line in a fair (non-chafing, correct-angle) path
A fairlead is not optional cosmetics: a line that jumps a sheave or saws across a cheek will fail the rope and can explode a block under load.
Mechanical Advantage — Counting Parts of Line
Ideal mechanical advantage of a simple purchase is approximately equal to the number of parts of line supporting the moving block (the lines that share the load).
- Common name Typical arrangement (teaching model) Ideal MA (approx.)
- Single whip One fixed block, line over it 1 (direction change only)
- Gun tackle Two single blocks 2
- Luff (watch) tackle Double and single block 3 or 4 depending which block moves
- Double purchase Two double blocks 4
- Twofold purchase Same family as double 4
Counting method used on exams: look at the moving block and count how many parts of rope leave it toward the standing block (including the part made fast there if it supports the load). That count is the ideal MA. If you pull on a hauling part that adds another supporting part when the hauling part comes off the moving block, include it—follow the diagram in the stem carefully.
Worked idea: A gun tackle with two single blocks and two parts supporting the load → pull half the weight on the hauling part (ideal), ignoring friction. To lift 400 lb ideally at MA 4, hauling force ≈ 100 lb before friction.
Friction and real-world MA
Each sheave costs efficiency. Sticky bearings, undersized sheaves, wet manila, and bad leads mean you pull more than W/MA. Blocks must be lubricated and inspected ; cracked shells and frozen sheaves are discarded, not painted over.
Sheave Diameter vs Line Size
Bending a fiber line over too small a sheave crushes interior fibers and kills strength. Coast Guard teaching problems often use a rule of thumb for manila :
Minimum sheave diameter ≈ 2 × the circumference of the rope (manila teaching rule).
Example: Manila line with 3-inch circumference → minimum sheave diameter about 6 inches . (If a stem gives diameter of rope instead of circumference, convert carefully: circumference ≈ π × diameter; many exam items state circumference directly.)
Wire rope uses larger ratios and different tables—do not apply the manila rule blindly to wire. The exam's point is: undersize sheaves destroy line and are unsafe.
Reeving, Leads, and Side Loads
Reeve so the hauling part leads fairly and the blocks do not twist into a foul lead .
Keep the load line in the plane of the sheaves; side-loading cheeks invites failure.
Use becks or straps sized for the load; pad eyes and railings not designed as lift points are not "close enough."
When two purchases share a load, match them and control swing—passenger decks are no place for a free-swinging engine part.
Bosun's Chair and Personnel Safety
A bosun's chair is a seat used to suspend a person for work aloft or over the side (painting, inspecting, clearing a fouled point). Personnel lifts are not casual cargo lifts.
Critical exam/safety point: the chair's bridle is secured with a shackle , and the shackle pin must pass through the eye of the bridle (ride with the pin through the bridle eye) and be properly seized/secured so it cannot unscrew under motion. Using a random hook that can slip off the eye is unacceptable.
Additional practices:
- Inspect chair, bridle, gantline, and blocks before each use
- Tend the hauling part with a competent crewmember—never leave a person aloft on an unattended line
- Keep tools on lanyards; control paint and debris over passenger spaces
- Mind electrical hazards and stack gas if working near the stack or antenna farm
- Prefer purpose-built stages and fall protection policies required by company SMS when available
If the stem asks how the bosun's chair is made fast to the gantline, choose the answer that keeps the shackle pin through the bridle eye and secured—not a open hook resting under the eye.
Safety Around Purchases on Small Passenger Vessels
Know the SWL of blocks and line; do not lift engines with dock-line leftovers.
Clear the area under the load; passengers stay behind barriers.
Use tag lines to control swing.
Never stand in the bight of a hauling part.
Lower with control—do not depend on a single pair of gloved hands without a turn on a bitt or cleat when loads are heavy.
Master scenario
You must lift a 200 lb pump from the engine room hatch using a double purchase (ideal MA 4). Ideal hauling load ≈ 50 lb before friction; with friction plan for more. Check sheave size against the manila fall, fairlead clear of the hatch coaming, keep passengers off the afterdeck, and treat any person going down the hatch on a chair as a personnel evolution with a locked shackle pin through the bridle.
- High-yield Q160 checklist
- MA ≈ parts of line at the moving block
- Gun ≈ 2, double purchase ≈ 4 (typical teaching values)
- Manila sheave diameter ≈ 2 × circumference
- Fairleads prevent chafe and side loads
- Bosun's chair: shackle pin through bridle eye , secured
Master those five and purchase questions become systematic instead of mysterious.