Study guide
4.7 Bearings, LOPs & Fixes
USCG Master 100-Ton Captain License Master Less Than 100 GRT
Track your progress as you read
Finished sections get a check mark.
1 Introduction: Master 100 Credential
0.1 About the Master Less Than 100 GRT Credential 0.2 Eligibility, Sea Service & Tonnage Calculations 0.3 MMC Application: TWIC, Medical, Drug Test, Fees & ASAP 0.4 ONC06 Exam Format, Modules, Scoring & REC Logistics
2 Rules of the Road: Foundation
1.1 COLREGS vs Inland Rules 1.2 General Definitions (Rules 1–3) 1.3 Lookout & Safe Speed (Rules 5–6) 1.4 Risk of Collision (Rule 7)
3 Rules of the Road: Steering & Sailing
1.5 Action to Avoid Collision (Rule 8) 1.6 Narrow Channels & TSS (Rules 9–10) 1.7 Overtaking (Rules 11–13) 1.8 Head-On & Crossing (Rules 14–15)
4 Rules of the Road: Responsibilities & Visibility
1.9 Give-Way & Stand-On (Rules 16–17) 1.10 Responsibilities Between Vessels (Rule 18) 1.11 Conduct in Restricted Visibility (Rule 19) 1.12 Lights & Shapes — General (Rules 20–22)
5 Rules of the Road: Lights & Shapes Detail
1.13 Lights for Power-Driven Vessels (Rule 23) 1.14 Lights & Shapes for Towing/Pushing (Rule 24) 1.15 Lights for Sailing, Rowing & Fishing (Rules 25–26) 1.16 NUC, RAM, CBD, Pilot, Anchored & Aground (Rules 27–30)
6 Rules of the Road: Sound, Light & Distress Signals
1.17 Sound Signals — Maneuvering & Warning (Rules 32–34) 1.18 Sound Signals in Restricted Visibility (Rule 35) 1.19 Distress Signals (Rule 37 / Annex IV)
7 Deck General: Seamanship
2.1 Vessel Nomenclature & Construction Terms 2.2 Marlinespike Seamanship: Lines, Knots & SWL 2.3 Purchases, Blocks & Tackle 2.4 Ground Tackle, Anchoring & Mooring
8 Deck General: Maneuvering
2.5 Boat Handling, Prop Walk & Pivot Point 2.6 Docking, Undocking & Line Handling 2.7 Bank Effects, Shallow Water & Wake 2.8 Heavy Weather Deck Handling
9 Deck General: Ops, Engines & Documents
2.9 Marine Engines, Fuel & Small Power Plants 2.10 Stability, Trim & Tonnage Basics for Masters 2.11 Certificates, Documents & COI 2.12 Passenger Operations, Watchkeeping & Shipboard Management
10 Deck Safety: Fire & Lifesaving
3.1 Fire Classes, Chemistry & Prevention 3.2 Firefighting Equipment, Systems & Drills 3.3 Required Safety Equipment & PFDs 3.4 Lifesaving Appliances for Small Passenger Vessels (T-Boats)
11 Deck Safety: Emergencies
3.5 Man Overboard & Recovery 3.6 Flooding, Damage Control & Abandon Ship 3.7 First Aid, Survival & Cold-Water Immersion 3.8 Communications, Distress Signals & SAR
12 Deck Safety: Pollution & Crew Safety
3.9 Pollution Prevention & Oil Discharge Rules 3.10 Passenger/Crew Safety in Emergencies 3.11 Hot Work, Temporary Repairs & Shipboard Safety
13 Navigation General: Charts & Aids to Navigation
4.1 Nautical Charts, Scale, Lat/Long & Chart No. 1 4.2 U.S. Aids to Navigation: Lateral Marks (IALA-B) 4.3 Non-Lateral Aids, Light Characteristics & Numbering 4.4 Navigation Publications & Notices to Mariners
14 Navigation General: Compass & Piloting
4.5 Magnetic Compass: Variation & Deviation 4.6 Compass Error & TVMDC Conversions 4.7 Bearings, LOPs & Fixes 4.8 Dead Reckoning: Speed-Time-Distance
15 Navigation General: Tides, Currents & Weather
4.9 Tides: Tables, Datums & Height of Tide 4.10 Currents: Set, Drift & Current Tables 4.11 Marine Weather & Meteorology 4.12 Storm Warnings & Heavy-Weather Navigation Decisions
16 Navigation General: Electronics & Radio
4.13 Electronic Navigation: GPS, Chartplotters, Depth & AIS 4.14 Radar Basics & Marine Radio (VHF)
17 Chart Plotting (90% Module)
5.1 Plotting Tools & Chart Setup 5.2 Plotting Courses, Bearings & Measuring Distance 5.3 Set, Drift & Course-to-Steer 5.4 Fixes, Running Fixes & Timed Plot Problems
4.7 Bearings, LOPs & Fixes
Key Takeaways Explain This Topic AI
A line of position (LOP) is a locus of possible positions from a single observation; a fix requires intersecting LOPs or equivalent.
Relative bearings are measured from the ship’s head (0° dead ahead); true bearings are relative to true north for chart plotting.
A two-bearing fix uses two LOPs; a three-bearing fix adds a check and reveals observation error by a triangle of error.
A running fix advances an earlier LOP by DR to cross a later LOP when only one mark is available over time.
Poor geometry (small angle of cut) multiplies bearing error into large position error—prefer LOPs that cross near 90°.
Last updated: July 2026
Position Without Guesswork
Piloting is the art of fixing a vessel’s position relative to charted objects in coastal and inland waters—the daily bread of a Master LT 100 on near-coastal routes. Electronics help, but Q162 Navigation General and Q163 Chart Plot still expect classical methods: bearings , lines of position (LOPs) , fixes , running fixes , and distance off .
A fix is a position determined from observations at a known time, plotted and labeled on the chart. It is stronger than a pure dead reckoning (DR) position (Section 4.8) because it is tied to real objects, not only course and speed.
- Relative Bearings vs True Bearings
- Relative bearing
A relative bearing is measured from the ship’s head using a scale where:
- 000° relative = dead ahead
- 090° relative = broad on the starboard beam
- 180° relative = dead astern
- 270° relative = broad on the port beam
Relative bearings answer “Where is it from me right now relative to my bow?” They are useful for collision avoidance and lookout reports, but you do not plot relative bearings directly as true LOPs without converting.
Converting relative to true (or compass)
True bearing ≈ true heading + relative bearing (normalize to 0–360°).
Example. True heading 040°T , relative bearing to a lighthouse 030° starboard → true bearing = 040 + 030 = 070°T .
If heading is known only by compass, convert heading to true first (TVMDC), then add relative bearing—or convert the resulting compass bearing to true. Consistency beats clever shortcuts.
True bearing for the chart
A true bearing is the direction from the vessel to the object (or sometimes object to vessel—know which the problem states) measured from true north . When you plot an LOP from a visual bearing on a chart, you work in true .
Reciprocal: If the bearing from ship to light is 070°T, the bearing from light to ship is 070° + 180° = 250°T . Plotting practice: you draw the line through the light on the reciprocal so the vessel lies somewhere on that line.
Line of Position (LOP)
A single bearing to a charted object produces a line of position : the vessel is somewhere along that line (neglecting small distance effects). One LOP alone is not a fix . It only reduces possible positions to a line.
Sources of LOPs in Master-level coastal work:
- Visual bearings to lights, towers, tanks, points, daymarks
- Ranges (two objects in line) — an especially strong LOP
- Radar ranges/bearings (as taught in electronics sections)
- Depth curves (weak/supporting)
- Celestial LOPs (not the focus of Master 100 NC, but the LOP concept is the same)
Label every LOP with time and object . On Chart Plot, unlabeled lines lose points even when geometry is right.
Two-Bearing Fix
Observe bearings to two well-separated charted objects at essentially the same time (or note times if simultaneous is impossible). Convert both to true , plot both LOPs, and take the intersection as the fix.
Worked concept.
- Bearing to Light A: 050°T
- Bearing to Stack B: 120°T
- Angle of cut = 120 − 50 = 70° (acceptable; nearer 90° is better)
Intersection of LOP A and LOP B = fix , labeled with time, e.g. FIX 1012 .
Ideal geometry
Aim for an angle of cut between LOPs of about 30° to 150° , with ~90° best . When two objects are almost in the same direction, the LOPs are nearly parallel and a 1° bearing error slides the intersection miles along the line.
Three-Bearing Fix
A three-bearing fix uses three objects. Perfectly observed, all three LOPs meet at one point. In real life they form a small triangle of error (cocked hat). Practical rules:
Prefer the geometric center of a small triangle when errors are random and objects are well spaced.
If the triangle is large , distrust the observations—re-shoot bearings, check identification of objects, check TVMDC conversions.
Three LOPs detect mistakes that two LOPs hide.
For exam storytelling: three-bearing fixes are the quality standard when time and visibility allow; two-bearing fixes are minimum for a plotted fix.
Running Fix
When only one suitable object is available, you cannot get a simultaneous two-LOP fix. A running fix uses time and motion :
Take bearing #1 to the object at time t₁ ; plot LOP₁.
Run a known course and speed (DR) for interval Δt .
Take bearing #2 at time t₂ ; plot LOP₂.
Advance LOP₁ by the DR course and distance for Δt (move every point on LOP₁ parallel to the track by the DR distance).
Intersection of advanced LOP₁ with LOP₂ is the running fix at t₂.
You can also retire a later LOP backward to an earlier time. Same geometry, opposite direction.
Limitation: A running fix is only as good as the DR between observations. Unknown current (set/drift) biases the advanced LOP. Still, it is standard coastal technique and a Chart Plot staple.
Numeric sketch. Speed 10 kn , interval 30 minutes → distance run = 10 × 0.5 = 5.0 NM . Advance LOP₁ 5.0 NM along the DR track direction.
Distance Off: Horizontal and Vertical Angles
Sometimes you need distance to an object , not only a bearing.
Horizontal sextant angle (concept)
If two charted objects have a known baseline distance between them, a measured horizontal angle at the vessel places you on a circle of position (constant angle subtends the same chord). Combined with a bearing or a second angle, you fix position. Exam items test the idea : constant horizontal angle → arc/circle of position; intersection with another LOP → fix.
Vertical sextant angle (concept)
If an object’s height is known (e.g., lighthouse height from Light List) and you measure the vertical angle from sea level to the top, distance off follows from trigonometric tables or the rough rule used in many texts:
Distance (NM) ≈ (height in feet × 0.565) / vertical angle in minutes
(form depends on units; exams often provide the table or a simplified formula).
Conceptually: taller object + larger angle → closer distance . Vertical angle distance off combined with a bearing yields a fix (bearing LOP + range circle).
You do not need surveyor-level derivation for Master 100; you need to recognize when distance-off methods apply and that height must be correct (charted/list height above the proper datum).
Dangers of Poor LOPs
- Problem Effect
- Small angle of cut (< ~30°) Tiny bearing errors → large position error along the LOPs
- Misidentified object Confident wrong fix — extremely dangerous near hazards
- Using magnetic bearings without conversion LOPs skewed by variation/deviation
- Non-simultaneous bearings without running-fix technique Phantom intersection
- Bearings taken slowly while turning Each LOP belongs to a different position
- Ignoring distance from danger Fix may look neat while still inside a danger circle
- Master near-coastal habits
Pre-select conspicuous objects along the route before departure (tanks, lights, points).
Prefer ranges when entering harbors—two objects in line give a highway-grade LOP.
Cross-check GPS with at least an occasional visual fix in pilot waters.
When the angle of cut is poor, change objects or add a third LOP rather than trusting a skinny intersection.
Record time, bearing, object, and conversion so another officer can reconstruct the fix.
Linking to compass work
Every visual compass bearing is a compass observation until you apply deviation for the ship’s head and variation to reach true for the chart. Sections 4.5–4.6 are not optional theory—they are the front end of every plotted LOP.
Piloting is professional skepticism: assume a single pretty intersection can still be wrong until geometry, identification, and conversions all agree.