Study guide
4.10 Currents: Set, Drift & Current Tables
USCG Master 100-Ton Captain License Master Less Than 100 GRT
Track your progress as you read
Finished sections get a check mark.
1 Introduction: Master 100 Credential
0.1 About the Master Less Than 100 GRT Credential 0.2 Eligibility, Sea Service & Tonnage Calculations 0.3 MMC Application: TWIC, Medical, Drug Test, Fees & ASAP 0.4 ONC06 Exam Format, Modules, Scoring & REC Logistics
2 Rules of the Road: Foundation
1.1 COLREGS vs Inland Rules 1.2 General Definitions (Rules 1–3) 1.3 Lookout & Safe Speed (Rules 5–6) 1.4 Risk of Collision (Rule 7)
3 Rules of the Road: Steering & Sailing
1.5 Action to Avoid Collision (Rule 8) 1.6 Narrow Channels & TSS (Rules 9–10) 1.7 Overtaking (Rules 11–13) 1.8 Head-On & Crossing (Rules 14–15)
4 Rules of the Road: Responsibilities & Visibility
1.9 Give-Way & Stand-On (Rules 16–17) 1.10 Responsibilities Between Vessels (Rule 18) 1.11 Conduct in Restricted Visibility (Rule 19) 1.12 Lights & Shapes — General (Rules 20–22)
5 Rules of the Road: Lights & Shapes Detail
1.13 Lights for Power-Driven Vessels (Rule 23) 1.14 Lights & Shapes for Towing/Pushing (Rule 24) 1.15 Lights for Sailing, Rowing & Fishing (Rules 25–26) 1.16 NUC, RAM, CBD, Pilot, Anchored & Aground (Rules 27–30)
6 Rules of the Road: Sound, Light & Distress Signals
1.17 Sound Signals — Maneuvering & Warning (Rules 32–34) 1.18 Sound Signals in Restricted Visibility (Rule 35) 1.19 Distress Signals (Rule 37 / Annex IV)
7 Deck General: Seamanship
2.1 Vessel Nomenclature & Construction Terms 2.2 Marlinespike Seamanship: Lines, Knots & SWL 2.3 Purchases, Blocks & Tackle 2.4 Ground Tackle, Anchoring & Mooring
8 Deck General: Maneuvering
2.5 Boat Handling, Prop Walk & Pivot Point 2.6 Docking, Undocking & Line Handling 2.7 Bank Effects, Shallow Water & Wake 2.8 Heavy Weather Deck Handling
9 Deck General: Ops, Engines & Documents
2.9 Marine Engines, Fuel & Small Power Plants 2.10 Stability, Trim & Tonnage Basics for Masters 2.11 Certificates, Documents & COI 2.12 Passenger Operations, Watchkeeping & Shipboard Management
10 Deck Safety: Fire & Lifesaving
3.1 Fire Classes, Chemistry & Prevention 3.2 Firefighting Equipment, Systems & Drills 3.3 Required Safety Equipment & PFDs 3.4 Lifesaving Appliances for Small Passenger Vessels (T-Boats)
11 Deck Safety: Emergencies
3.5 Man Overboard & Recovery 3.6 Flooding, Damage Control & Abandon Ship 3.7 First Aid, Survival & Cold-Water Immersion 3.8 Communications, Distress Signals & SAR
12 Deck Safety: Pollution & Crew Safety
3.9 Pollution Prevention & Oil Discharge Rules 3.10 Passenger/Crew Safety in Emergencies 3.11 Hot Work, Temporary Repairs & Shipboard Safety
13 Navigation General: Charts & Aids to Navigation
4.1 Nautical Charts, Scale, Lat/Long & Chart No. 1 4.2 U.S. Aids to Navigation: Lateral Marks (IALA-B) 4.3 Non-Lateral Aids, Light Characteristics & Numbering 4.4 Navigation Publications & Notices to Mariners
14 Navigation General: Compass & Piloting
4.5 Magnetic Compass: Variation & Deviation 4.6 Compass Error & TVMDC Conversions 4.7 Bearings, LOPs & Fixes 4.8 Dead Reckoning: Speed-Time-Distance
15 Navigation General: Tides, Currents & Weather
4.9 Tides: Tables, Datums & Height of Tide 4.10 Currents: Set, Drift & Current Tables 4.11 Marine Weather & Meteorology 4.12 Storm Warnings & Heavy-Weather Navigation Decisions
16 Navigation General: Electronics & Radio
4.13 Electronic Navigation: GPS, Chartplotters, Depth & AIS 4.14 Radar Basics & Marine Radio (VHF)
17 Chart Plotting (90% Module)
5.1 Plotting Tools & Chart Setup 5.2 Plotting Courses, Bearings & Measuring Distance 5.3 Set, Drift & Course-to-Steer 5.4 Fixes, Running Fixes & Timed Plot Problems
4.10 Currents: Set, Drift & Current Tables
Key Takeaways Explain This Topic AI
Set is the direction the current flows TOWARD (the direction it carries you); drift is the speed of the current in knots.
Flood is generally the incoming (rising) tidal current; ebb is the outgoing (falling) tidal current; slack is the brief period of little or no horizontal flow near turn of the current.
Reversing currents (typical of rivers, straits, many inlets) alternate roughly along an axis; rotary currents (common offshore) change direction through the compass over the tidal cycle.
Current changes COG and SOG relative to heading and speed through water; course-to-steer problems on Chart Plot (Q163) use set and drift explicitly.
When docking, stem the current (point into it) for control; a V-shaped surface ripple that points upstream may indicate a buoy or obstruction being towed under by current.
Last updated: July 2026
Current Is Horizontal Motion
If tide is the water going up and down , current is the water going sideways . On a Master 100 vessel, current decides whether you make good the course you steered, how hard the docking will be, and whether an inlet bar is a passenger-friendly crossing or a white-knuckle event. Q162 tests definitions and tables; Q163 Chart Plot will force you to apply set and drift numerically. Learn the language once and use it on both modules.
Set and Drift — Exact Definitions
Memorize these two words as if they were COLREGS:
Term Meaning Units / expression
Set The direction the current flows TOWARD — the direction it will carry the vessel Degrees true (or as stated); e.g., set 090° means the current is flowing eastward
Drift The speed of the current Knots (nautical miles per hour)
Critical trap: set is not "where the current came from." If the table says set 270° , the water is flowing toward the west and will push your vessel westward . Drift of 2.0 kn means two nautical miles of offset per hour if you did nothing but drift with it.
On a plot, current is often drawn as a vector: set is the direction of the arrow; drift is the length scaled to speed × time. Heading and speed through water produce a water track ; current produces a ground track (COG/SOG).
Flood, Ebb, and Slack
In tidal waters, the horizontal flow is the tidal current :
Flood current: generally the incoming flow associated with the rising tide (water moving into a bay, river, or harbor)
- Ebb current: generally the outgoing flow associated with the falling tide
- Slack water: the period of little or no horizontal flow near the turn between flood and ebb
Slack is not the same as high or low water. High/low water are vertical extremes (stand of the tide). Slack is a horizontal minimum. In many channels the current continues for a time after high water, so slack may occur after high or low. Current tables list slack times and maximum flood/ebb times and strengths — use those products, not an assumption that "high tide means no current."
Strength and timing
Maximum flood and maximum ebb often occur roughly midway between slacks (varies by location). Spring ranges tend to produce stronger currents; neap ranges produce weaker ones. Narrow inlets, bridge openings, and river mouths can amplify drift to several knots even on small coasts — enough to stop a underpowered vessel dead in the water or set you onto a jetty.
Rotary vs Reversing Currents
Type Behavior Where masters meet it
Reversing Flow alternates roughly back and forth along one axis (flood one way, ebb the opposite) Rivers, many inlets, narrow straits, harbor channels
Rotary Direction of set rotates through the compass over the tidal cycle; strength also varies More common offshore and in open bays where the current is not constrained to a channel
Exam questions may describe a current that "sets in successive directions around the compass" → rotary . A channel that "floods north and ebbs south" → reversing .
Current Tables, Tidal Current Charts, and Atlases
Use the right product:
Tidal Current Tables (or NOAA current predictions): times of slack , times and strengths of max flood/max ebb , and set directions for reference stations; corrections for secondary stations
Tidal current charts / atlases: graphic snapshots of set and drift across a bay or sound at successive hours relative to a reference station — excellent for planning a passenger route through complex waterways
Coast Pilot / local knowledge: notes on dangerous rips, overfalls, and recommended transit windows
Read set carefully (toward which direction?), drift in knots, and whether the prediction is for surface current — wind can layer a surface set different from deeper flow, but exam problems stick to table values unless stated otherwise.
- Effect on COG, SOG, and Course to Steer
- Speed through water (STW): how fast the hull moves relative to the water (log/speed through water)
- Speed over ground (SOG): how fast you move over the bottom (GPS)
- Course over ground (COG): the track made good over the bottom
A following current (set nearly the same as your course) increases SOG . A head current decreases SOG and can make you late or unable to stem an inlet. A beam current sets you off track: COG diverges from heading even if you "steer the charted course." To make good a desired track you must steer a course to steer (CTS) that aims up-current by the amount of the set/drift triangle — the heart of many Q163 problems and of real inlet approaches.
Practical Master 100 examples
Harbor transit: 3 kn ebb on the nose; vessel makes 8 kn STW → about 5 kn SOG. Time-to-dock doubles versus slack.
Crossing a channel: flood sets you onto a shoal to starboard if you hold heading without offset.
Meeting situation: both vessels are being set; COLREGS still apply, but your aspect and CPA change with current — another reason lookout and radar judgment matter in strong flow.
Docking: Stem the Current
When current is significant, professional docking doctrine is to stem the current — present the bow into the flow so the current becomes a controllable force against the hull rather than a sideways shove off the pier. Benefits:
- Lower SOG for the same STW when stemming, giving more time for lines and engine orders
- Predictable set against the dock or into the slip when you angle correctly
- Less risk of the stern swinging wildly with a strong beam set
If wind and current disagree, decide which force is stronger on your hull and freeboard, then plan the approach for the dominant force. Brief the deck crew: which lines first, where the set will pin you, and when to abort.
Visual Cue: V-Shaped Ripple and Towed-Under Buoys
Strong current can pull a buoy under or hold it awash. A classic visual: a V-shaped ripple or wake pattern on the surface whose point (apex) indicates the upstream direction — water is flowing toward the open end of the V after it hits the obstruction. That pattern may mark a buoy, stake, or wreck being dragged under. Do not cut close "because nothing shows on the surface." Reduce speed, keep clear of the ripple, and assume solid metal is just below.
Other current visuals for the watch: rips and overfalls where opposing flows meet, eddies behind jetties, and a vessel's ground track crabbing across the channel while heading "straight."
Master's current pocket card
Set = direction current flows toward ; drift = speed in knots .
Slack ≠ high/low water automatically — use current tables for slack.
Flood in / ebb out as general tidal-current sense; local tables win arguments.
Current changes COG/SOG ; plan CTS and ETA with set/drift.
Stem the current when docking in flow.
V-ripple pointing upstream may hide a towed-under buoy — stay clear.
Master currents on paper so Chart Plot and real docks do not master you.