Study guide

3.1 Vessel Nomenclature & Construction Terms

USCG OUPV Six-Pack Captain License Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction: Getting Your OUPV License

0.1 About the OUPV / Six-Pack License 0.2 Eligibility & Sea Service Requirements 0.3 Credentialing: MMC Application, TWIC, Physical, Drug Test & CPR 0.4 Exam Format, Modules, Scoring & Testing Logistics

2 Rules of the Road (Navigation Rules)

1.1 The Navigation Rules: International (COLREGS) vs Inland 1.2 General Definitions (Rules 1-3) 1.3 The Lookout & Safe Speed (Rules 5-6) 1.4 Risk of Collision & Compass Bearings (Rule 7) 1.5 Action to Avoid Collision (Rule 8) 1.6 Narrow Channels & Traffic Separation Schemes (Rules 9-10) 1.7 Overtaking (Rules 11-13) 1.8 Head-On & Crossing Situations (Rules 14-15) 1.9 Give-Way & Stand-On Responsibilities (Rules 16-17) 1.10 Responsibilities Between Vessels — the Pecking Order (Rule 18) 1.11 Conduct in Restricted Visibility (Rule 19) 1.12 Lights & Shapes — General Rules, Visibility & Definitions (Rules 20–22) 1.13 Lights for Power-Driven Vessels Underway (Rule 23) 1.14 Lights & Shapes for Towing and Pushing (Rule 24) 1.15 Lights for Sailing, Rowing & Fishing Vessels (Rules 25–26) 1.16 Lights & Shapes for NUC, RAM, CBD, Pilot, Anchored & Aground (Rules 27–30) 1.17 Sound & Light Signals + Distress Signals (Rules 32–37, Annex IV)

3 Navigation General

2.1 Nautical Charts: Reading, Scale, Lat/Long & Chart No. 1 2.2 The U.S. Aids to Navigation System: Lateral Marks (IALA Region B) 2.3 Non-Lateral Aids: Safe-Water, Isolated-Danger, Special & Information Marks 2.4 Light Characteristics & Buoy Numbering 2.5 The Magnetic Compass: Variation & Deviation 2.6 Compass Error & Conversions (TVMDC) 2.7 Piloting: Bearings, Lines of Position & Fixes 2.8 Dead Reckoning: Speed-Time-Distance 2.9 Tides: Tables, Datums & Height of Tide 2.10 Currents: Set, Drift & Current Tables 2.11 Navigation Publications 2.12 Marine Weather & Meteorology 2.13 Storm Warnings & Heavy-Weather Handling 2.14 Electronic Navigation: GPS, Chartplotters, Depth Sounder & AIS 2.15 Radar & Marine Radio (VHF / GMDSS)

4 Deck General: Seamanship & Vessel Operations

3.1 Vessel Nomenclature & Construction Terms 3.2 Marlinespike Seamanship: Lines, Knots & Splices 3.3 Ground Tackle & Anchoring 3.4 Boat Handling & Maneuvering 3.5 Docking, Undocking & Line Handling 3.6 Marine Engines, Fuel & Basic Troubleshooting 3.7 Vessel Documentation, Load Lines & Regulations 3.8 Marine Environmental Protection & Pollution Regulations

5 Deck Safety: Emergencies, Firefighting & Survival

4.1 Required Safety Equipment & Carriage Regulations 4.2 Personal Flotation Devices & Lifesaving Appliances 4.3 Fire Prevention & the Fire Triangle 4.4 Firefighting Equipment & Procedures 4.5 Man Overboard & Recovery 4.6 Flooding, Damage Control & Abandon Ship 4.7 Vessel Stability & Loading 4.8 First Aid, Survival & Cold-Water Immersion

6 Chart Plotting & Navigation Problems

5.1 Plotting Tools & Chart Setup 5.2 Plotting Courses, Bearings & Measuring Distance 5.3 Dead-Reckoning Plots & Estimated Positions 5.4 Fixes: Two/Three-Bearing, Running Fix & Distance-Off 5.5 Set, Drift & Course-to-Steer Problems

3.1 Vessel Nomenclature & Construction Terms

Key Takeaways Explain This Topic AI

Bow is forward, stern is aft; port is left and starboard is right when you face forward - port and left both have four letters.

Draft is the vertical distance from the waterline to the lowest point of the keel and decides where you can safely float; freeboard is waterline to main deck and is your reserve buoyancy.

Displacement is the weight of water the hull pushes aside, which equals the weight of the vessel and everything aboard.

List is a static athwartships lean from uneven loading; heel is a temporary lean from wind or a turn; trim is the fore-and-aft difference in draft.

Watertight bulkheads divide the hull into compartments so a single flooded space need not sink the vessel.

Last updated: July 2026

Why Nomenclature Comes First

Every command aboard a vessel - anchoring, docking, fighting a fire, recovering a person overboard - depends on shared words. The Deck General module opens with nomenclature because you cannot answer a rules or safety question if you do not know which end is the bow or which side is to starboard. Learn this vocabulary cold; it is the cheapest set of points on the exam and the foundation of everything that follows.

Directions Aboard

Stand facing the front of the boat and orient yourself:

Bow - the forward (front) end. Stern - the after (back) end.

Port - the left side when facing forward. Starboard - the right side.

Amidships - the middle of the vessel. Forward and aft - toward the bow and toward the stern.

Athwartships - across the vessel, side to side. Fore-and-aft - along the vessel's length.

Inboard - toward the centerline. Outboard - toward the sides, away from centerline.

Abeam - at right angles to the centerline. Ahead/astern - in front of or behind the vessel.

Two memory hooks make port and starboard permanent: "port" and "left" each have four letters , and a glass of port wine is red - which matches the red port sidelight. Starboard is therefore right, and its light is green. Because these never change with the direction you happen to be looking, a helm order to "come right to starboard" is unambiguous to every crew member.

Principal Dimensions

These measured quantities describe the size and shape of the hull:

Length overall (LOA) - the extreme length from the foremost to the aftermost point. Related terms are waterline length (the length actually in the water) and length between perpendiculars .

Beam - the width of the vessel at its widest point.

Draft - the vertical distance from the waterline down to the lowest point of the keel . Draft decides where you can go: a boat drawing four feet cannot cross a three-foot bar. Always compare your draft to charted depth plus the height of tide.

Freeboard - the vertical distance from the waterline up to the main deck edge . Freeboard is your reserve buoyancy ; a low-freeboard, overloaded boat swamps easily in a following sea.

Displacement - the weight of the water the hull pushes aside , which by Archimedes' principle equals the total weight of the vessel plus fuel, gear, passengers, and stores. Add weight and the boat settles deeper, increasing draft and reducing freeboard.

How the Boat Sits: Trim, List, and Heel

Three terms describe the vessel's attitude in the water, and the exam likes to separate them:

Trim - the fore-and-aft difference between the draft at the bow and the draft at the stern. A boat down by the stern trims aft; down by the head trims forward.

List - a static, athwartships lean caused by uneven weight distribution - fuel burned from one tank, cargo shifted to one side.

Heel - a temporary, athwartships lean caused by an outside force such as wind pressure or the centrifugal effect of a hard turn. A boat heels into a turn's outside and away from the wind.

The distinction matters: a list signals a loading or flooding problem you must correct; a heel is a normal, momentary response to wind or maneuvering.

Hull Structure

The skeleton and skin of the boat carry their own names:

  • Term What it is
  • Keel The backbone running fore-and-aft along the bottom centerline
  • Frames The transverse ribs that give the hull its shape
  • Bulkhead A vertical wall dividing the interior; a watertight bulkhead subdivides the hull for flooding control
  • Transom The flat, athwartships surface at the stern
  • Stem The leading edge of the bow
  • Gunwale (gunnel) The upper edge of the vessel's side
  • Bilge The lowest inside part of the hull where water collects
  • Chine The line where the bottom meets the side
  • Scuppers Deck drain openings that shed water overboard
  • Limber holes Small openings in frames that let bilge water flow to the pump
  • Watertight Integrity

A hull stays afloat only while water stays out. Watertight bulkheads divide the hull into separate compartments so that flooding in one space does not spread through the whole boat - the reason a single hull breach need not be fatal. Through-hull fittings (for engine cooling, sink drains, and heads) each carry a seacock or valve that can be shut to stop flooding. Reserve buoyancy - that band of hull between the waterline and the first opening that would let water down below (a downflooding point such as a low vent or hatch) - is what keeps the boat afloat as seas break aboard. Keeping seacocks serviced, hatches dogged, and freeboard adequate is the practical heart of watertight integrity.

Putting It Together

Picture a 38-foot charter boat: her LOA is 38 feet, her beam 13 feet, her draft 3.5 feet, and her freeboard at the stern just 2 feet. Load six passengers and full fuel and she settles deeper - displacement rises, draft increases toward 3.9 feet, and freeboard shrinks. If those passengers all crowd to the starboard rail to watch a whale, the boat takes on a list to starboard; when she leans into a hard port turn, that is heel . Knowing which is which tells you whether to redistribute weight (list) or simply ease the turn (heel).