Study guide
4.7 Vessel Stability & Loading
USCG OUPV Six-Pack Captain License Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction: Getting Your OUPV License
0.1 About the OUPV / Six-Pack License 0.2 Eligibility & Sea Service Requirements 0.3 Credentialing: MMC Application, TWIC, Physical, Drug Test & CPR 0.4 Exam Format, Modules, Scoring & Testing Logistics
2 Rules of the Road (Navigation Rules)
1.1 The Navigation Rules: International (COLREGS) vs Inland 1.2 General Definitions (Rules 1-3) 1.3 The Lookout & Safe Speed (Rules 5-6) 1.4 Risk of Collision & Compass Bearings (Rule 7) 1.5 Action to Avoid Collision (Rule 8) 1.6 Narrow Channels & Traffic Separation Schemes (Rules 9-10) 1.7 Overtaking (Rules 11-13) 1.8 Head-On & Crossing Situations (Rules 14-15) 1.9 Give-Way & Stand-On Responsibilities (Rules 16-17) 1.10 Responsibilities Between Vessels — the Pecking Order (Rule 18) 1.11 Conduct in Restricted Visibility (Rule 19) 1.12 Lights & Shapes — General Rules, Visibility & Definitions (Rules 20–22) 1.13 Lights for Power-Driven Vessels Underway (Rule 23) 1.14 Lights & Shapes for Towing and Pushing (Rule 24) 1.15 Lights for Sailing, Rowing & Fishing Vessels (Rules 25–26) 1.16 Lights & Shapes for NUC, RAM, CBD, Pilot, Anchored & Aground (Rules 27–30) 1.17 Sound & Light Signals + Distress Signals (Rules 32–37, Annex IV)
3 Navigation General
2.1 Nautical Charts: Reading, Scale, Lat/Long & Chart No. 1 2.2 The U.S. Aids to Navigation System: Lateral Marks (IALA Region B) 2.3 Non-Lateral Aids: Safe-Water, Isolated-Danger, Special & Information Marks 2.4 Light Characteristics & Buoy Numbering 2.5 The Magnetic Compass: Variation & Deviation 2.6 Compass Error & Conversions (TVMDC) 2.7 Piloting: Bearings, Lines of Position & Fixes 2.8 Dead Reckoning: Speed-Time-Distance 2.9 Tides: Tables, Datums & Height of Tide 2.10 Currents: Set, Drift & Current Tables 2.11 Navigation Publications 2.12 Marine Weather & Meteorology 2.13 Storm Warnings & Heavy-Weather Handling 2.14 Electronic Navigation: GPS, Chartplotters, Depth Sounder & AIS 2.15 Radar & Marine Radio (VHF / GMDSS)
4 Deck General: Seamanship & Vessel Operations
3.1 Vessel Nomenclature & Construction Terms 3.2 Marlinespike Seamanship: Lines, Knots & Splices 3.3 Ground Tackle & Anchoring 3.4 Boat Handling & Maneuvering 3.5 Docking, Undocking & Line Handling 3.6 Marine Engines, Fuel & Basic Troubleshooting 3.7 Vessel Documentation, Load Lines & Regulations 3.8 Marine Environmental Protection & Pollution Regulations
5 Deck Safety: Emergencies, Firefighting & Survival
4.1 Required Safety Equipment & Carriage Regulations 4.2 Personal Flotation Devices & Lifesaving Appliances 4.3 Fire Prevention & the Fire Triangle 4.4 Firefighting Equipment & Procedures 4.5 Man Overboard & Recovery 4.6 Flooding, Damage Control & Abandon Ship 4.7 Vessel Stability & Loading 4.8 First Aid, Survival & Cold-Water Immersion
6 Chart Plotting & Navigation Problems
5.1 Plotting Tools & Chart Setup 5.2 Plotting Courses, Bearings & Measuring Distance 5.3 Dead-Reckoning Plots & Estimated Positions 5.4 Fixes: Two/Three-Bearing, Running Fix & Distance-Off 5.5 Set, Drift & Course-to-Steer Problems
4.7 Vessel Stability & Loading
Key Takeaways Explain This Topic AI
A floating vessel displaces a weight of water equal to its own total weight (displacement), which is why every boat has a maximum capacity.
Stability is the contest between the center of gravity (G, weight acting down) and the center of buoyancy (B, buoyant force acting up); positive metacentric height (GM) means stable, negative GM means capsize.
Loading weight high raises G and reduces GM - the dangerous direction; keeping weight low and centered improves stability.
The free-surface effect of loose water in a tank, bilge, or on deck shifts to the low side, raises G, and can capsize an otherwise sound boat.
Overloading and passengers crowding one rail reduce freeboard and shift weight off-center, inviting downflooding and capsize.
Last updated: July 2026
Vessel Stability and Loading
Stability is a vessel's tendency to return upright after wind, wave, or load heels it over. For a six-pack captain carrying passengers who move around the deck, stability is not academic - overloading and poor weight distribution capsize small passenger boats every year.
Buoyancy and displacement
A floating vessel obeys Archimedes' principle : it displaces a volume of water whose weight equals the vessel's total weight . That weight is the boat's displacement . Add passengers, fuel, or gear and the boat settles lower until it displaces enough extra water to match - which is precisely why a boat has a rated maximum capacity .
Two centers: G and B
Stability is a contest between two points:
Center of gravity (G) - where all the boat's weight acts, pulling down . Heavy gear carried high (a full flybridge, people standing on the cabin top) raises G ; weight kept low (ballast, fuel in the bilge, seated passengers) lowers G .
Center of buoyancy (B) - the geometric center of the underwater hull, pushing up . As the boat heels, the underwater shape changes and B shifts toward the low side.
Upright, G and B are vertically aligned. When the boat heels, B moves outboard while G stays put, and the offset between the upward buoyant force (through B) and the downward weight (through G) creates a righting arm (GZ) - the lever that rolls the boat back upright. A larger righting arm means more stability.
The metacenter and GM
The metacenter (M) is where the line of buoyant force crosses the centerline at a small angle of heel. The vertical distance from G to M - the metacentric height (GM) - is the key stability number:
Positive GM (M above G) : the boat is stable and rights itself.
Negative GM (G above M) : the boat is unstable - it lolls or capsizes.
Raising G (loading weight high) shrinks GM toward zero - the danger direction.
Stiff versus tender
A stiff boat has a large GM : it resists heeling and snaps back with a quick, jerky roll. Very stiff is uncomfortable but safe.
A tender boat has a small GM : it heels easily and rolls slowly and sluggishly. A slow roll that hangs at the end is a warning of too little stability - often weight loaded too high or free water below.
The free-surface effect
One of the most dangerous and most-tested hazards is the free-surface effect . Liquid free to move in a partly filled tank - or worse, flood water sloshing in the bilge or across the deck - runs to the low side as the boat heels, shifting weight in the direction of the heel. This effectively raises G and reduces GM , and it feeds on itself: the more she heels, the more the water runs down, the more she heels. A boat with much free water can capsize even at modest total weight. That is why you dewater flooding aggressively (4.6), keep tanks either full or empty rather than slack, and keep scuppers and freeing ports clear so water never ponds on deck.
Loading, overloading, and passenger placement
Practical stability comes down to loading:
Respect the capacity limits - passengers plus gear must stay within the rated load; overloading settles the boat low, kills freeboard, and invites downflooding.
Keep weight low and centered - seat passengers down and inboard , never standing on the gunwale or crowded on one rail. A boatload of people all rushing to one side is a classic capsize setup.
Watch weight added high - a heavy tower, a full high water tank, or gear stacked on deck all raise G.
Maintain freeboard and watertight integrity - close hatches and ports in a seaway; low freeboard plus a boarding wave equals downflooding.
Capsizing and downflooding
A capsize occurs when heeling forces overwhelm the righting arm - from overloading, a shifted load, free surface, a beam sea, or a hard turn at speed. Downflooding is the endgame: once water pours through an opening, buoyancy and stability collapse together. On the exam the load-bearing ideas are: displacement equals the weight of water displaced ; positive GM is stable, negative GM capsizes ; loading weight high raises G and reduces stability ; and the free-surface effect of loose water is a stability killer.