Study guide

2.7 Piloting: Bearings, Lines of Position & Fixes

USCG OUPV Six-Pack Captain License Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction: Getting Your OUPV License

0.1 About the OUPV / Six-Pack License 0.2 Eligibility & Sea Service Requirements 0.3 Credentialing: MMC Application, TWIC, Physical, Drug Test & CPR 0.4 Exam Format, Modules, Scoring & Testing Logistics

2 Rules of the Road (Navigation Rules)

1.1 The Navigation Rules: International (COLREGS) vs Inland 1.2 General Definitions (Rules 1-3) 1.3 The Lookout & Safe Speed (Rules 5-6) 1.4 Risk of Collision & Compass Bearings (Rule 7) 1.5 Action to Avoid Collision (Rule 8) 1.6 Narrow Channels & Traffic Separation Schemes (Rules 9-10) 1.7 Overtaking (Rules 11-13) 1.8 Head-On & Crossing Situations (Rules 14-15) 1.9 Give-Way & Stand-On Responsibilities (Rules 16-17) 1.10 Responsibilities Between Vessels — the Pecking Order (Rule 18) 1.11 Conduct in Restricted Visibility (Rule 19) 1.12 Lights & Shapes — General Rules, Visibility & Definitions (Rules 20–22) 1.13 Lights for Power-Driven Vessels Underway (Rule 23) 1.14 Lights & Shapes for Towing and Pushing (Rule 24) 1.15 Lights for Sailing, Rowing & Fishing Vessels (Rules 25–26) 1.16 Lights & Shapes for NUC, RAM, CBD, Pilot, Anchored & Aground (Rules 27–30) 1.17 Sound & Light Signals + Distress Signals (Rules 32–37, Annex IV)

3 Navigation General

2.1 Nautical Charts: Reading, Scale, Lat/Long & Chart No. 1 2.2 The U.S. Aids to Navigation System: Lateral Marks (IALA Region B) 2.3 Non-Lateral Aids: Safe-Water, Isolated-Danger, Special & Information Marks 2.4 Light Characteristics & Buoy Numbering 2.5 The Magnetic Compass: Variation & Deviation 2.6 Compass Error & Conversions (TVMDC) 2.7 Piloting: Bearings, Lines of Position & Fixes 2.8 Dead Reckoning: Speed-Time-Distance 2.9 Tides: Tables, Datums & Height of Tide 2.10 Currents: Set, Drift & Current Tables 2.11 Navigation Publications 2.12 Marine Weather & Meteorology 2.13 Storm Warnings & Heavy-Weather Handling 2.14 Electronic Navigation: GPS, Chartplotters, Depth Sounder & AIS 2.15 Radar & Marine Radio (VHF / GMDSS)

4 Deck General: Seamanship & Vessel Operations

3.1 Vessel Nomenclature & Construction Terms 3.2 Marlinespike Seamanship: Lines, Knots & Splices 3.3 Ground Tackle & Anchoring 3.4 Boat Handling & Maneuvering 3.5 Docking, Undocking & Line Handling 3.6 Marine Engines, Fuel & Basic Troubleshooting 3.7 Vessel Documentation, Load Lines & Regulations 3.8 Marine Environmental Protection & Pollution Regulations

5 Deck Safety: Emergencies, Firefighting & Survival

4.1 Required Safety Equipment & Carriage Regulations 4.2 Personal Flotation Devices & Lifesaving Appliances 4.3 Fire Prevention & the Fire Triangle 4.4 Firefighting Equipment & Procedures 4.5 Man Overboard & Recovery 4.6 Flooding, Damage Control & Abandon Ship 4.7 Vessel Stability & Loading 4.8 First Aid, Survival & Cold-Water Immersion

6 Chart Plotting & Navigation Problems

5.1 Plotting Tools & Chart Setup 5.2 Plotting Courses, Bearings & Measuring Distance 5.3 Dead-Reckoning Plots & Estimated Positions 5.4 Fixes: Two/Three-Bearing, Running Fix & Distance-Off 5.5 Set, Drift & Course-to-Steer Problems

2.7 Piloting: Bearings, Lines of Position & Fixes

Key Takeaways Explain This Topic AI

A line of position (LOP) is a line, from a bearing, range, or depth, somewhere on which the vessel must lie.

A fix is the intersection of two or more simultaneous LOPs, and it is most reliable when the LOPs cross near 90 degrees.

A relative bearing is measured clockwise from the bow; add it to the true heading to get a true bearing.

A three-bearing fix forms a small triangle called a cocked hat; a large triangle warns of error, and you assume the position nearest to danger.

A range (two charted objects in line) and a danger bearing are simple, powerful tools for staying in safe water.

Last updated: July 2026

Piloting: Bearings, Lines of Position & Fixes

Quick Answer: Piloting fixes your position using visible landmarks and aids. A bearing to a charted object gives a line of position (LOP) that you lie somewhere along; crossing two or more LOPs taken at the same time gives a fix. The best fixes come from LOPs that cross near a right angle, and a three-bearing fix reveals its own accuracy through the size of the triangle it forms.

Piloting is how a small-boat operator navigates within sight of land, and it feeds directly into the Chart Plot module.

Bearings: True, Magnetic, and Relative

A bearing is the direction from you to an object.

A true bearing is measured clockwise from true north and is what you plot on the chart.

A magnetic bearing is measured from magnetic north (convert with TVMDC before plotting).

A relative bearing is measured clockwise from the vessel's bow (000 relative) . An object broad on the starboard beam is at 090 relative ; dead astern is 180 relative ; on the port beam, 270 relative .

To turn a relative bearing into a true bearing, add the relative bearing to the vessel's true heading (subtract 360 if the total exceeds 360).

Worked example: Your vessel's heading is 040 degrees True and a buoy bears 030 degrees relative (30 degrees off the starboard bow). True bearing = 040 + 030 = 070 degrees True . If the heading were 350 and the object were 030 relative, the sum 380 would become 380 - 360 = 020 degrees True .

Lines of Position

A line of position (LOP) is a line drawn on the chart along which your vessel must be located. You get one from:

A visual bearing to a charted object (plot the bearing line from the object).

A range — two charted objects seen in line — which is an especially accurate LOP requiring no compass.

A depth matching a charted contour, or a distance from a radar range.

A single LOP tells you that you are somewhere on that line, but not where on it. Crossing it with a depth sounding that matches a charted contour, or with a radar distance-off arc, upgrades it toward a full fix.

Fixes

A fix is your actual position, found where two or more LOPs taken at the same time cross. Quality depends on the angle of cut :

LOPs crossing near 90 degrees give the strongest fix.

Angles smaller than about 30 degrees (or larger than 150) give a weak, elongated fix because a small bearing error shifts the crossing point a long way.

When taking bearings for a two-bearing fix, sight the object that is changing bearing slowly first (near the bow or stern) and the fast-changing object (near the beam) last , so both bearings are effectively simultaneous. Mark and label every fix with a circled dot and the time , then start a fresh dead-reckoning plot from it.

  • The Three-Bearing Fix and the Cocked Hat
  • Three LOPs rarely meet at a perfect point. Instead they form a small triangle called a "cocked hat."

A small triangle means good, consistent bearings — take your position at its center.

A large triangle warns of an error (a mis-identified object, a bad bearing, or an uncorrected compass) — re-check before trusting it.

For safety, when a cocked hat lies near a hazard, assume you are at the corner nearest the danger .

Running Fix and Distance Off

When only one object is available, you can still fix your position with a running fix : take a bearing, note the time, run your course and speed for a while, take a second bearing on the same object, then advance the first LOP by the distance and direction run and cross it with the second. The intersection is a running fix — less precise than a simultaneous fix but valuable when landmarks are scarce.

A related single-object trick is distance off by doubling the angle on the bow : note the run between the moment an object is at one relative angle off the bow and the moment that angle has doubled; the distance run then equals the distance off the object. The bow-and-beam case (45 degrees, then 90 degrees abeam) is the most common version and is covered in the Chart Plot module.

Danger Bearings and Danger Circles

You do not always need a full fix to stay safe:

A danger bearing is a single bearing line drawn to a charted object that just clears a hazard. You keep the object's bearing on the safe side of that line — for example, "keep the lighthouse bearing not more than 040 degrees" to stay clear of a reef.

A danger circle (or distance) keeps you outside a set range from a hazard, useful with radar: "stay more than 0.5 nautical miles off the shoal."

These techniques let a busy small-boat skipper monitor safety with a single glance at the compass or radar, instead of plotting continuously. Combined with regular fixes, they keep you both on track and out of danger .