Study guide

2.9 Tides: Tables, Datums & Height of Tide

USCG OUPV Six-Pack Captain License Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction: Getting Your OUPV License

0.1 About the OUPV / Six-Pack License 0.2 Eligibility & Sea Service Requirements 0.3 Credentialing: MMC Application, TWIC, Physical, Drug Test & CPR 0.4 Exam Format, Modules, Scoring & Testing Logistics

2 Rules of the Road (Navigation Rules)

1.1 The Navigation Rules: International (COLREGS) vs Inland 1.2 General Definitions (Rules 1-3) 1.3 The Lookout & Safe Speed (Rules 5-6) 1.4 Risk of Collision & Compass Bearings (Rule 7) 1.5 Action to Avoid Collision (Rule 8) 1.6 Narrow Channels & Traffic Separation Schemes (Rules 9-10) 1.7 Overtaking (Rules 11-13) 1.8 Head-On & Crossing Situations (Rules 14-15) 1.9 Give-Way & Stand-On Responsibilities (Rules 16-17) 1.10 Responsibilities Between Vessels — the Pecking Order (Rule 18) 1.11 Conduct in Restricted Visibility (Rule 19) 1.12 Lights & Shapes — General Rules, Visibility & Definitions (Rules 20–22) 1.13 Lights for Power-Driven Vessels Underway (Rule 23) 1.14 Lights & Shapes for Towing and Pushing (Rule 24) 1.15 Lights for Sailing, Rowing & Fishing Vessels (Rules 25–26) 1.16 Lights & Shapes for NUC, RAM, CBD, Pilot, Anchored & Aground (Rules 27–30) 1.17 Sound & Light Signals + Distress Signals (Rules 32–37, Annex IV)

3 Navigation General

2.1 Nautical Charts: Reading, Scale, Lat/Long & Chart No. 1 2.2 The U.S. Aids to Navigation System: Lateral Marks (IALA Region B) 2.3 Non-Lateral Aids: Safe-Water, Isolated-Danger, Special & Information Marks 2.4 Light Characteristics & Buoy Numbering 2.5 The Magnetic Compass: Variation & Deviation 2.6 Compass Error & Conversions (TVMDC) 2.7 Piloting: Bearings, Lines of Position & Fixes 2.8 Dead Reckoning: Speed-Time-Distance 2.9 Tides: Tables, Datums & Height of Tide 2.10 Currents: Set, Drift & Current Tables 2.11 Navigation Publications 2.12 Marine Weather & Meteorology 2.13 Storm Warnings & Heavy-Weather Handling 2.14 Electronic Navigation: GPS, Chartplotters, Depth Sounder & AIS 2.15 Radar & Marine Radio (VHF / GMDSS)

4 Deck General: Seamanship & Vessel Operations

3.1 Vessel Nomenclature & Construction Terms 3.2 Marlinespike Seamanship: Lines, Knots & Splices 3.3 Ground Tackle & Anchoring 3.4 Boat Handling & Maneuvering 3.5 Docking, Undocking & Line Handling 3.6 Marine Engines, Fuel & Basic Troubleshooting 3.7 Vessel Documentation, Load Lines & Regulations 3.8 Marine Environmental Protection & Pollution Regulations

5 Deck Safety: Emergencies, Firefighting & Survival

4.1 Required Safety Equipment & Carriage Regulations 4.2 Personal Flotation Devices & Lifesaving Appliances 4.3 Fire Prevention & the Fire Triangle 4.4 Firefighting Equipment & Procedures 4.5 Man Overboard & Recovery 4.6 Flooding, Damage Control & Abandon Ship 4.7 Vessel Stability & Loading 4.8 First Aid, Survival & Cold-Water Immersion

6 Chart Plotting & Navigation Problems

5.1 Plotting Tools & Chart Setup 5.2 Plotting Courses, Bearings & Measuring Distance 5.3 Dead-Reckoning Plots & Estimated Positions 5.4 Fixes: Two/Three-Bearing, Running Fix & Distance-Off 5.5 Set, Drift & Course-to-Steer Problems

2.9 Tides: Tables, Datums & Height of Tide

Key Takeaways Explain This Topic AI

U.S. charted depths are measured from the Mean Lower Low Water (MLLW) datum, so actual depth = charted depth + height of tide.

Overhead clearances are referenced to Mean High Water (MHW), not MLLW - never mix the two datums.

The Rule of Twelfths estimates intermediate tide height by adding the range in a 1-2-3-3-2-1 hourly sequence.

Spring tides (new/full moon) have the largest range; neap tides (quarter moons) the smallest.

A negative tide means the water is below chart datum - less depth than charted, a grounding hazard.

Last updated: July 2026

Tides, Datums and the Height of Tide

Tide is the vertical rise and fall of the sea surface caused by the gravitational pull of the moon and sun on the oceans, modified by the shape of the coastline. As a captain you rarely predict tides from first principles - you read a tide table - but you must command the vocabulary and be able to compute the height of tide at a moment between the printed high and low waters, because that number decides whether you clear a shoal or ground on it.

The language of tides

High Water (HW) and Low Water (LW) - the crest and trough of the tidal curve.

Range - the vertical difference between one HW and the adjacent LW.

Stand - the brief period of little vertical change at the top and bottom.

Spring tides - the largest ranges, at new and full moon , when sun and moon pull in line.

Neap tides - the smallest ranges, at the quarter moons , when sun and moon pull at right angles.

Tides fall into three patterns: semidiurnal (two nearly equal highs and lows each day, typical of the U.S. East Coast); diurnal (one high and one low each day, parts of the Gulf of Mexico); and mixed (two unequal highs and lows a day, the U.S. West Coast). The difference between the two daily lows in a mixed tide is the diurnal inequality , and it is exactly why the datum is built on the lower low water.

The chart datum: MLLW

Charted soundings (depths, printed in feet, fathoms, or meters as stated in the chart title block) are measured downward from a reference plane called the datum . Since 1980 the U.S. tidal datum has been Mean Lower Low Water (MLLW) - the average of the lower of the two daily low waters over the 19-year National Tidal Datum Epoch . Because the datum sits at a low-water plane, the real water is usually deeper than the printed number, and the tide table almost always adds a positive height of tide :

Actual depth = Charted depth + Height of tide

A negative tide (a height printed with a minus sign, common at spring lows) means less water than charted - a genuine grounding hazard where you have the least margin.

The overhead-clearance trap

Vertical clearances under bridges and overhead cables are not referenced to MLLW. They are given above Mean High Water (MHW) . So at any tide lower than MHW you actually have more clearance than the chart prints:

Actual clearance = Charted clearance + (MHW - present height of tide)

Mixing the two datums - subtracting tide from a clearance, or adding a clearance to a depth - is a classic exam trap. Depth works from the low-water plane; clearance works from the high-water plane.

Interpolating with the Rule of Twelfths

Between printed HW and LW, the practical mariner estimates height with the Rule of Twelfths , which approximates the tidal curve (a rough sine wave) over about six hours. The range is added, hour by hour, in this sequence:

  • Hour from LW Fraction of range Running rise
  • 1st 1/12 1/12
  • 2nd 2/12 3/12
  • 3rd 3/12 6/12
  • 4th 3/12 9/12
  • 5th 2/12 11/12
  • 6th 1/12 12/12

The water moves slowest near the turns and fastest at mid-cycle - which is why the two middle hours each carry 3/12.

Worked example

Tide table: Low water 0600 at 1.0 ft , High water 1212 at 7.0 ft . Range = 7.0 - 1.0 = 6.0 ft , so one twelfth = 6.0 / 12 = 0.5 ft .

  • Time Rise this hour Height of tide
  • 0600 -- 1.0 ft
  • 0700 +0.5 (1/12) 1.5 ft
  • 0800 +1.0 (2/12) 2.5 ft
  • 0900 +1.5 (3/12) 4.0 ft
  • 1000 +1.5 (3/12) 5.5 ft
  • 1100 +1.0 (2/12) 6.5 ft
  • 1200 +0.5 (1/12) 7.0 ft

At 0900 the height of tide is 4.0 ft . Over a shoal charted at 3 ft , the actual depth is 3 + 4.0 = 7.0 ft . A vessel drawing 5 ft therefore carries 2 ft of water under the keel - thin, but afloat.

Now the same instant at a bridge: the chart prints 55 ft vertical clearance (above MHW), and MHW is 7.0 ft . At 0900 the height is 4.0 ft, i.e. 3.0 ft below MHW, so actual clearance = 55 + (7.0 - 4.0) = 58 ft . When the tide is below MHW you gain clearance; a rising spring tide near MHW gives you the least.

Reference and subordinate stations

Printed tables list a few reference stations in full and give subordinate stations as time and height corrections to the nearest reference - so many marinas are found by applying "HW +0h48m, height x0.9" to the reference port. Modern practice is to pull the prediction directly from NOAA for the exact station, but the correction method is still tested.