Study guide
1.3 PSI Testing & Multicraft Test Strategy
USPS Postal Exam 955 Technical Maintenance
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 USPS 955 Exam Structure & Scoring 1.2 Personal Characteristics & Experience Inventory 1.3 PSI Testing & Multicraft Test Strategy
2 Chapter 2: Electronics
Section 2.1: Digital Logic Gates & Truth Tables Section 2.2: Combinational & Sequential Logic Section 2.3: Analog Electronic Devices Section 2.4: Operational Amplifiers (Op-amps) & Filters Section 2.5: Power Supplies & Rectification Section 2.6: Electronic Schematic & Symbol Reading
3 Chapter 3: Electrical Fundamentals
Section 3.1: Ohm's Law & Circuit Calculations Section 3.2: Capacitance, Inductance & RC/RL Networks Section 3.3: AC & DC Power Fundamentals Section 3.4: Three-Phase Power & Motors
4 Chapter 4: Mechanical Systems
Section 4.1: Power Transmission & Machine Elements Section 4.2: Bearings & Lubrication Section 4.3: Hydraulic Principles & Components Section 4.4: Pneumatic Principles & Components
5 Chapter 5: HVAC & Refrigeration
Section 5.1: The Refrigeration Cycle Section 5.2: Refrigerants & Environmental Controls Section 5.3: Heating & Combustion Systems Section 5.4: HVAC Control Systems
6 Chapter 6: Computers, PLCs & Networking
Section 6.1: PC Hardware & Operating Systems Section 6.2: Industrial Networks & Cabling Section 6.3: PLC Fundamentals & I/O Systems Section 6.4: PLC Troubleshooting & Ladder Logic
7 Chapter 7: Spatial Reasoning
Section 7.1: Object Rotation & 3D Visualization Section 7.2: Paper Folding & Pattern Matching Section 7.3: Part Assembly & Mechanical Drawing Section 7.4: Spatial Visualization Strategies
8 Chapter 8: Mathematical Reasoning
Section 8.1: Applied Algebra & Formulas Section 8.2: Geometric Formulas & Measurement Section 8.3: Unit Conversions & Scale Section 8.4: Readout & Indicator Problems
9 Chapter 9: Industrial Safety & Standards
9.1 Lockout/Tagout (LOTO) Procedures 9.2 Electrical Safety & NFPA 70E 9.3 Workplace Hazards, PPE & SDS 9.4 Safe Tool Usage & Material Handling
1.3 PSI Testing & Multicraft Test Strategy
Key Takeaways Explain This Topic AI
Part 2 is a proctored test at a PSI center with strict security, locker requirements, and on-screen calculators.
The multicraft block contains 60 questions to be solved in 60 minutes, covering mechanical, electrical, electronics, and facilities.
There is no guessing penalty; leaving questions blank yields zero points, while guessing has a 25% success rate.
The Three-Pass Strategy optimizes time by securing quick answers first and leaving complex calculations and guesses for later passes.
Last updated: July 2026
PSI Testing & Multicraft Test Strategy
Once you pass the initial application and behavioral inventory, the next stage of the hiring process is the proctored technical exam, administered by PSI Services LLC ( PSI ). This computer-based exam is held at a secure testing center and represents the core technical hurdle for all maintenance positions. Success on this portion of the exam requires not only technical knowledge but also a tactical strategy for managing time, stress, and test mechanics.
What to Expect at the PSI Test Center
PSI centers enforce strict security measures to maintain test integrity. Understanding these rules beforehand will help you stay focused on exam day:
Check-In Protocols : You must arrive at least 15 to 30 minutes before your scheduled appointment. You will be required to present two forms of identification, one of which must be a government-issued photo ID.
Prohibited Items : Absolutely no personal belongings are allowed in the testing room. This includes cell phones, smartwatches, wallets, food, drinks, and personal calculators. You will be provided with a secure locker to store your belongings.
Testing Environment : You will be seated at a computer workstation, often separated by partitions from other test-takers. The testing room is monitored by video cameras and on-site proctors.
Provided Materials : You will be provided with scratch paper and a pencil, which must be returned to the proctor at the end of the test. A basic calculator is typically provided on-screen within the testing interface.
Anatomy of the Multicraft Block
The technical portion of the USPS 955 exam is centered around a multicraft block of 60 multiple-choice questions . According to the official USPS Exam 955 Assessment Information Package, you are allocated 60 minutes to complete this Multicraft part; a separate Spatial Relations part follows (about 65-68 items in roughly 40-60 minutes), for a total assessment time of approximately two hours.
This block is called "multicraft" because it covers a broad range of technical disciplines. The USPS does not expect every applicant to be an expert in all areas, but you must demonstrate proficiency across several core fields:
Mechanical Systems : Questions cover gears, belts, pulleys, bearings, couplings, alignment, pneumatics, and hydraulics.
Electrical Systems : This includes Ohm's Law , series and parallel circuits, AC/DC motors, transformers, relays, and electrical safety.
Electronics & Digital Systems : You will face questions on resistors, capacitors, diodes, transistors, digital logic gates (AND, OR, NOT), and programmable logic controllers (PLCs).
Facilities & Maintenance Operations : This covers basic welding, hand tools, measuring instruments, HVAC principles, and general troubleshooting logic.
The Three-Pass Time Management Strategy
With 60 questions and 60 minutes, you have on average exactly one minute per question . Some questions will take only 15 seconds, while complex schematic diagrams or mathematical calculations may take several minutes. To maximize your score, use the Three-Pass Strategy :
Pass 1: The Low-Hanging Fruit : Go through the exam from start to finish, answering only the questions you know instantly. If a question requires calculations or makes you hesitate, skip it immediately. Do not spend time on it yet.
Pass 2: The Solve-Able Problems : Go back through the skipped questions. Focus on the ones that require some calculation or reading a diagram, but which you are confident you can solve with a bit of time.
Pass 3: The Hard Guesses : In the final 5 to 10 minutes, tackle the remaining questions that you are unsure about.
Loading diagram...
The Crucial Rule: No Guessing Penalty
One of the most important aspects of the USPS 955 exam is its scoring mechanism: there is no guessing penalty . Your score is calculated based solely on the number of correct answers. A wrong answer and a blank answer both result in zero points.
This fact has massive implications for your test strategy:
Never Leave a Question Blank : Before your time expires, you must ensure that every single question has an answer selected. If you leave 10 questions blank, you are guaranteed to score zero points on all of them. If you guess, you have a 25% chance of getting each one right.
The "Letter of the Day" Technique : If you are running out of time and have several questions left that you haven't even read, quickly bubble in the same answer choice (e.g., all "C") for all of them. Statistically, selecting the same option increases your odds of hitting a few correct answers compared to randomly alternating letters.
Process of Elimination : Whenever you must guess, always try to eliminate obviously incorrect answers first. For example, if you can rule out two options, your odds of guessing the correct answer increase from 25% to 50%.
Preparing for the Multicraft Nature
Because the exam covers multiple crafts, candidates often make the mistake of studying only their specialty. An experienced electrician might ignore mechanical systems, while a commercial HVAC technician might ignore digital electronics. However, because the scoring engine evaluates you for multiple job profiles, neglecting an entire category can limit your career options. If you score 100% on electrical but 0% on electronics, you will qualify for MM and MPE, but you will miss out on the lucrative ET profile. To avoid this, dedicate your study time to building a baseline of competency in all four core areas of the multicraft block.
Navigating the Computer Testing Interface
The testing software at PSI centers is designed to be functional but basic. It features navigation buttons such as 'Next,' 'Previous,' and a 'Flag for Review' button. The 'Flag for Review' function is your primary tool for executing the Three-Pass Strategy. When you skip a question in Pass 1, click the flag button. This places a visual indicator next to the question number on the exam navigation panel. When you complete your first pass, you can quickly click on the flagged question numbers to jump directly to them, saving valuable seconds that would otherwise be wasted paging through the exam. Additionally, keep an eye on the digital timer displayed in the top corner of the screen. Checking it every 15 to 20 minutes will help you gauge your pace and adjust your speed before you run out of time.